Retro Trim

Interior sound proofing kit.

Complete interior sound deadening kit (8 pieces) to cover the rear bulkhead for all Porsche 911 models from 1965 through 1989. Pre-cut to original factory specifications. Manufactured from high performance self-adhesive bitumated plates for maximum reduction of rolling noise and vibration.

Due to age most original sound deadening has hardened, cracked and flacked off. Sound deadening in this state is a dangerous water trap. They can hide rust and will no longer provide adequate sound insulation. To protect against rust and ensure a silent comfortable ride we recommend you replace your old sound deadening before installing your new interior.

Our acoustic insulation kit is among the best available for performance, originality and fit. The kit is manufactured from high performance self-adhesive bitumated plates of 4mm thickness. The plates contain odor free additives and fillers to maximize reduction of rolling noise and vibration. Pieces in the kit are pre-cut to Stüttgart factory specifications.

Installation is easy. Ideal working temperature is 20-25°C. Make sure surfaces are clean and free from grease. Press sound deadening plates with the adhesive side on the surface after having removed cover material (paper or film). Warm up with a heat gun to shape the material in the form of your underbody. Press on with a roller to avoid air inclusions.

The kit contains all 8 pieces for the rear bulkhead. The sound proofing for the floorplan (4 pieces) can be added as an option.

Delivery Time is Normally 3-4 weeks on this product as this is made to order

Door panels (Pair). Porsche 911 1964-67



Complete ready-to-install door panels (pair) for all Porsche 911 models from 1964–1967, available in Porsche Nappa leather or Porsche classic vinyl with original pleated maps pockets.

Our door panels are among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, vibration deadening foam, water-resistant backing board. All panels are precision cut, stitched and pressure glued and stapled to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the door panels in Black only.

Please note that arm rests, door panel clips or other panel hardware are not included.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9015550312

The product you are viewing cross references to these numbers

Door panels (Pair). Porsche 911 1968


Complete door panels for the Porsche 911 model year 1968. Remanufactured to OEM specifications with integrated map pockets and welded basketweave vinyl inserts as original.

Please note that door cap retrims, door panel clips, handles or other panel hardware are not included.

Available in black only. Sold per pair.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9015550312X

The product you are viewing cross references to these numbers

Leather steering wheel . Black.

Diameter: 400mm (15.75")



The attachment spline is built in the steering wheel centre

Fits:
Porsche 911 S / T/E:M 1968-72

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134708110

The product you are viewing cross references to these numbers

Wood Steering Wheel 40cm / 15.5"

Fits:
Porsche 911 1965-73

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134708211

The product you are viewing cross references to these numbers

Dashboard cover set wood for RHD Cars.

Fits:
Porsche 911 1965-68 RHD Cars

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155204220

The product you are viewing cross references to these numbers

Complete restoration kit for 2 original Recaro sport seats of Porsche 911 models 1965–1973. This kit is available with plain, perforated, 'Pepita' (Hound's tooth) or Corduroy center sections, in Porsche Nappa leather or classic vinyl. Headrests covers (standard for '72-'73 models) are not included in this kit, but can be ordered separately.

Our Recaro sport seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your front seats back to factory new condition; all front seat covers and correction foam for seat base bolsters.

Our hand crafted front seat covers (2 back rest and 2 seat base covers), match Stuttgart factory specifications step by step; from the finest Scottish hides with perforation for the center sections (if required), colour coded vinyl, top quality calico backing material, exact specification pleat filling, right down to the piping cord and the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam. This allows you to correct the worn sides typically found on the driver's side seat bolster. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new cell foam. New seat base cell foams are not included as part of this kit.

The seat restoration kit comes with step-by-step installation instructions and pictures. Installation requires no specific tools and is within the ability of the moderately experienced home mechanic.

Because of fading of the original material and colour differences between dye lots, we offer the front seat restoration kit in Black only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Rear Backwall Panel (Parcelshelf).

Fits:
Porsche 911 1977-89

Complete ready-to-install backwall panel for Porsche 911 models 1977–1989 with top-stitched pleats. Available for Coupe and Targa models in Black Porsche Nappa leather or Vinyl. Can be ordered with integrated speaker grills.

Our rear bulkhead panel is among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; preformed water-resistant backing boards, installation clips, vibration deadening foam. The panels are trimmed with top quality Scottish hides or original specification leatherette as required. All panels are precision cut, riveted, stapled, stitched and pressure glued to guarantee a factory authentic fit.

The parcelshelf can be ordered with integrated speaker grills. Speaker grill perforations in the leather are digitally cut in octagon pattern exactly as original. Speaker openings are made for original 6x4 inch speakers, but can be adapted to suit your specific needs.

Because of fading of the original material and colour differences between dye lots, we offer the rear bulkhead panel in Black only. For complete full leather interior kits we can offer most original Porsche colours (please enquire).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155507600

The product you are viewing cross references to these numbers

Door bins SET OF 2 with carpet.
Black Carpet with edge.

Careful measurement and lining up with the door handle and door pull is essential, before creating mounting holes as they may not mount in exactly the same holes as the original pockets.



Fits:
Porsche 911 1974-89
Porsche 964 1989-94

Bag for Cabriolet Hood Tonneau Cover.


Delivery Time is Normally 14 - 21 working days on this product

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911561100BAG

The product you are viewing cross references to these numbers

Complete ready-to-install door panels for all Porsche 911 models from 1977-1989 and all 964 models 1989-1993 (OEM specification), LEATHER (SET OF 2)

Our door panels are among the best you can buy for originality and fit. Matched to Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, vibration deadening foam, water-resistant backing board, top quality calico backing material, exact specification pleat filling, right down to the high resistance yarns we use. All panels are precision cut, stitched and pressure glued to guarantee a factory authentic fit.

To install, simply make openings for the speakers/ accessories and install. Please note that door pockets, arm rest, door panel clips or other panel hardware are not included.

Because of fading of the original material and colour differences between dye lots, we offer the door panels in Black only.

Sold as a Pair Left & Right side

Fits:
Porsche 911 1987-89
Porsche 964

Complete rear restoration kit for the 2 rear seats of Porsche 911 and 964 models 1974-1993, available for Coupe, Targa and Cabriolet models, in leather or leatherette.

Our rear seat restoration kit is probably the best you can buy for completeness, originality and fit. The kit includes everything you typically need to bring your rear seats back to factory new condition; 2 back rest covers, 2 seat base covers, 2 bolster cover pairs and correction foam for seat base.

We match Stuttgart factory specifications step by step; from the finest Scottish hides, colour coded vinyl, top quality calico backing material, exact specification pleat filling, right down to the high resistance yarns we use. All hides are precision cut, piping bound and pre-formed to guarantee a factory authentic fit.

The kit is delivered with correction foam for the seat base. Bear in mind, that a significantly deformed or decomposed seat base can only be restored with new horsehair. New horsehair or rear bolster cell foams are not included as part of this kit.

The seat restoration kit comes with easy to follow step-by-step installation instructions and pictures. Installation requires no specific tools and is comfortably within the ability of the moderately experienced home mechanic.

Because of fading of the original material and colour differences between dye lots, we offer the rear seat restoration kit in Black and selected colors only. For complete full leather interior kits we can offer most original Porsche colors (please enquire).

Delivery Time is Normally 3-4 weeks on this product as this is made to order

Door Bins SET of 2 Without Carpet Porsche 911 / 964
these can be given to your interior trimmer to cover in leather or carpet.

Fits:
Porsche 911 1974-89
Porsche 964 1989-94

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155503000

The product you are viewing cross references to these numbers

Rear Back wall Panel (Parcel shelf).

Fits:
Porsche 911 1972-76 Targa / Coupe

Complete ready-to-install back wall panel (parcel shelf / rear bulkhead lining) for Porsche 911 models 1972–1976. Available for Coupe and Targa models in Black Porsche Nappa leather or Porsche Vinyl with profile bar as original.

Our rear bulkhead panel is among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; preformed water-resistant backing boards, profile bars, installation clips, vibration deadening foam. The panels are trimmed with top quality Scottish hides or original specification leatherette as required. All panels are precision cut, riveted, stapled, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear bulkhead panel in Black only. For complete full leather interior kits we can offer most original Porsche colours (please enquire).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155507500

The product you are viewing cross references to these numbers

Rear Backwall Panel (Parcelshelf).

Fits:
Porsche 911 1967-71 Targa

Complete ready-to-install rear backwall panel (parcelshelf / rear bulkhead lining) for Porsche 911 Targa models 1967–1971. Available for "soft window" and "glass window" models in Black Porsche Nappa leather or Porsche classic vinyl.

Our rear bulkhead panel is among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; preformed water-resistant backing boards, profile strips, installation clips, vibration deadening foam. We use top quality Scottish hides or original specification leatherette as required. All panels are precision cut, riveted, stapled, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear bulkhead panel in Black only. For complete full leather interior kits we can offer most original Porsche colours (please enquire).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155507541

The product you are viewing cross references to these numbers

Rear Backwall Panel (Parcelshelf).

Fits:
Porsche 911 1965-71 Coupe

Complete ready-to-install rear backwall panel (parcelshelf / rear bulkhead lining) for Porsche 911 Coupe models 1965–1971 with metal profile bar as original.Available in Black Porsche Napp a leather or Porsche classic vinyl.

Our rear bulkhead panel is among the best you can buy for originality and fit. We match Stuttgart factory specifications step by step; water-resistant backing boards, metal profile bar, installation clips, vibration deadening foam. We use top quality Scottish hides or original specification leatherette as required. All panels are precision cut, riveted, stapled, stitched and pressure glued to guarantee a factory authentic fit.

Because of fading of the original material and colour differences between dye lots, we offer the rear bulkhead panel in Black only. For complete full leather interior kits we can offer most original Porsche colours (please enquire).

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90155507522

The product you are viewing cross references to these numbers