Retro Line

Rust repair rear 1/4 panel arches Porsche 997 Standard body (Coupe, Cabrio , Targa) 

The problem!   Porsche 997 rear wing and inner arch have a double skin join at the outer lips and this is where the rust is occurring. Once they start bubbling on the outside then its most likely a cut out and replace job for theses sections. At the complete rear wings are hard to find Design911 have come up with a less expensive solution by suppling just the rear replacement arches and side sill panels. 

Fits: Porsche 997 Standard body (Coupe, Cabrio, Targa) 

Click picture for large parts diagram.
Diagram ref no 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99750396

The product you are viewing cross references to these numbers

Wiring harness loom ignition switch and hazards warning light.



Fits:
Porsche 911 / 912 - 1969 

Featuring original color-coded wiring, this harness is designed to fit precisely like the original. It includes wire tubing and oil-resistant tape, just like the factory version. The terminals are equipped with rubber sleeves for added protection. 

Each harness comes with detailed connection instructions for easy installation.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161202206

The product you are viewing cross references to these numbers

Wiring harness for ABS sensor - Rear
Sold each - Fits left and right

Fits:
Porsche 964  1989 to 1992

Wiring harness for connection ABS sensor / brake pad warning front (left or right)
2 x barrel connector with grommets and ground wire on both sides

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96461218500

The product you are viewing cross references to these numbers

Wiring harness for brake pad warning light - Front



Fits:
Porsche 911 3.2 Carrera - 1984 to 1989
Porsche 911 turbo - 1984 to 1989

Click 'Zoom in' for large parts diagram.
Diagram Ref No 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161205200

The product you are viewing cross references to these numbers

Wiring harness for brake pad warning light - Rear



Fits:
Porsche 911 3.2 Carrera - 1984 to 1989
Porsche 911 turbo - 1984 to 1989

Click 'Zoom in' for large parts diagram.
Diagram Ref No 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161205100

The product you are viewing cross references to these numbers

RS Style door pull strap set - left and right side
Sold as a pair

Various Colours Available

Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1997

For cars with RS Style door card upgrade.

Door handle strap, approx. 140x25mm, set of 2 pull straps

Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96455583200

The product you are viewing cross references to these numbers

Frame set window switch set. 



Fits:
Porsche 911 / 912 - 1965 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1997
Porsche 914 - 1970 to 1976

Window Switch Frame Set

Upgrade the door cards of your air-cooled classic with our latest enhancement. OEM metal brackets can be fragile, often getting damaged during switch or upholstery replacements. Our Window Switch Frame Set offers a durable solution, precision-crafted using CNC machining to seamlessly replace the standard OEM frames.

Installation is straightforward and hassle-free, with all necessary tools and screws included in the package, saving you valuable time.

This set is compatible with a range of classic models, including the F/G-model, 912, 914, 964, and 993. 

It includes frames for both the driver and passenger sides.

Please note:
Switches are not included.

This socket has a externally sleeved and has a internal nylon head to prevent damage to alloy wheels and wheel nuts or bolts head

Alloy Wheel Impact Socket 19mm 1/2"Sq DriveChrome Molybdenum sockets, hardened, tempered and anodised for corrosion resistance. Suitable for use with impact tools. Six-point socket is externally and internally sleeved to prevent damage to alloy wheels and nuts.

Chrome Molybdenum socket, hardened, tempered and anodised for corrosion resistance.
• Suitable for use with impact tools.
• Six-point socket is sleeved to prevent damage to alloy wheels and nuts.
• Colour coded for easy size selection.
• Model No. SX03019• Chrome Molybdenum socket, hardened, tempered and anodised for corrosion resistance.
• Suitable for use with impact tools.
• Six-point socket is externally and internally sleeved to prevent damage to alloy wheels and nuts.
• Colour coded for easy size selection.19mm 1/2"Sq Drive Alloy Wheel Impact Socket

Inline fuse for dash illumination lights. 



Fits:
Porsche 911 - 1965 to 1989

The power supply lead (black-blue) for the dashboard illumination is unfused.

A short in the brass bulb holder can lead to serious damage in your wiring harness. This easy to install inline fuse holder protects your wiring and expensive light switch.

This inline fuse can be positioned at the light switch in between terminal 58A  and the black blue wire(s) *
* for 1969 and 1970 models this wire will be black-purple.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90161204303

The product you are viewing cross references to these numbers

Tunnel wiring harness 1973 only - LHD (Left Hand Drive)

Fits:
Porsche 911 - 1973 only

The 1973 tunnel harness is a bit special as for some reason Porsche decided to tape the 1973 tunnel harness instead of using PVC conduit. 
In the PET catalogue this harness has the same part number as the 1972 version.
Complete tunnel harness with original color coded wiring. Runs from front fusebox and gauges through the tunnel to engine bay. 
This Harness will exactly fit like the original. 

Wire tube and oil resistant tape as original. Terminals have rubber sleeves and the harness comes with detailed connection instructions. Two new 6 pole male connectors and 1 x 14 pole female connector included.

This harness is taped, instead of PVC wire sleeving as only used for 1973 models.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91161200121

The product you are viewing cross references to these numbers

Glove box compartment - plastic with flocked inner side



Fits:
Porsche 356 A
Porsche 356 B
Porsche 356 C

Click 'Zoom in' for large parts diagram.
Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64455250101

The product you are viewing cross references to these numbers

Engine wiring harness loom. 



Fits:
Porsche 911 turbo - 1978 to 1981 US spec (with Catalytic Converter)

Complete engine harness, including 14 pole connector, rubber boot + protection tube for backup switch cable, alternator connection boots and rubber entry block.

Click 'Zoom in' for large parts diagram.
Diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93061201605

The product you are viewing cross references to these numbers

Ashtray delete cubby pocket. 
Fits Left and Right Hand Drive cars

Fits:
Porsche 911 - 1974 to  1989

Who is still using the ashtray in their classic 911?

This spot can be repurposed for something much more useful. Designed specifically to seamlessly fit your G-body Porsche 911, the goal has always been to create parts that match the car's style, ensuring aftermarket accessories do not feel out of place.

The installation uses the standard ashtray mounting spots, requiring no alterations, making it 100% reversible.

Manufactured with PA12 Nylon, this part offers excellent heat and chemical resistance, ensuring strength and durability.

Installation:

Remove the passenger side knee pad/trim (2x10mm nuts).
Remove the ashtray (additional 2x10mm nuts).
Install the accessory, reusing the 2x10mm nuts and washers. You’ll notice a small amount of adjustability, which allows you to set equal gaps between the left and right knee trim/pad, accommodating the slight variances in older cars.
Reinstall the passenger knee pad/trim.
This simple process allows you to repurpose the ashtray space with no permanent changes to your classic 911.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91155205004

The product you are viewing cross references to these numbers

Auxiliary Spotify Car Thing accessory mount. 
Fits Left and Right Hand Drive cars

Fits:
Porsche 911 - 1974 to  1989

Who is still using the ashtray in their classic 911?

This spot can be repurposed for something much more useful. This is the third accessory mount in our upcoming collection, designed specifically to seamlessly fit your G-body Porsche 911. The goal has always been to create parts that match the car's style, ensuring aftermarket accessories do not feel out of place.

Spotify Car Thing is perfect accessory for those who decided to remove the radio, but prefer a built in convenience to control the music.

The installation uses the standard ashtray mounting spots, requiring no alterations, making it 100% reversible.

Please Note:
Spotify "Car Thing" as well as magnetic mount are not part of this sale, both come with your Spotify accessory. Power supply is not included, it's also optional (check amazon for 12v to usb-c power supply).

Listing is only for the accessory mount and required hardware.

Manufactured with PA12 Nylon, this part offers excellent heat and chemical resistance, ensuring strength and durability.

Installation:

Remove the passenger side knee pad/trim (2x10mm nuts).
Remove the ashtray (additional 2x10mm nuts).
Install the accessory, reusing the 2x10mm nuts and washers. You’ll notice a small amount of adjustability, which allows you to set equal gaps between the left and right knee trim/pad, accommodating the slight variances in older cars.
Reinstall the passenger knee pad/trim.
This simple process allows you to repurpose the ashtray space with no permanent changes to your classic 911.

Auxiliary dash single gauge mount for 52mm diameter gauge. 
Fits Left and Right Hand Drive cars

Fits:
Porsche 911 - 1974 to  1989

Who is still using the ashtray in their classic 911?

This spot can be repurposed for something much more useful. This is the second accessory mount in our upcoming collection, designed specifically to seamlessly fit your G-body Porsche 911. The goal has always been to create parts that match the car's style, ensuring aftermarket accessories do not feel out of place.

The installation uses the standard ashtray mounting spots, requiring no alterations, making it 100% reversible.

Manufactured with PA12 Nylon, this part offers excellent heat and chemical resistance, ensuring strength and durability.

Installation:

Remove the passenger side knee pad/trim (2x10mm nuts).
Remove the ashtray (additional 2x10mm nuts).
Install the accessory, reusing the 2x10mm nuts and washers. You’ll notice a small amount of adjustability, which allows you to set equal gaps between the left and right knee trim/pad, accommodating the slight variances in older cars.
Reinstall the passenger knee pad/trim.
This simple process allows you to repurpose the ashtray space with no permanent changes to your classic 911.

Auxiliary dash twin gauge mount for 52mm diameter gauges. 
Fits Left and Right Hand Drive cars

Fits:
Porsche 911 - 1974 to  1989

Who is still using the ashtray in their classic 911?

This spot can be repurposed for something much more useful. This is the first accessory mount in our upcoming collection, designed specifically to seamlessly fit your G-body Porsche 911. The goal has always been to create parts that match the car's style, ensuring aftermarket accessories do not feel out of place.

The installation uses the standard ashtray mounting spots, requiring no alterations, making it 100% reversible.

Manufactured with PA12 Nylon, this part offers excellent heat and chemical resistance, ensuring strength and durability.

Installation:

Remove the passenger side knee pad/trim (2x10mm nuts).
Remove the ashtray (additional 2x10mm nuts).
Install the accessory, reusing the 2x10mm nuts and washers. You’ll notice a small amount of adjustability, which allows you to set equal gaps between the left and right knee trim/pad, accommodating the slight variances in older cars.
Reinstall the passenger knee pad/trim.
This simple process allows you to repurpose the ashtray space with no permanent changes to your classic 911.