Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Retro Line
Retro Line for Porsche
Retro Line parts for Porsche at Design911 focus on interior and exterior details that keep a period-correct look while subtly updating usability, comfort, and style
A Quick Look at Retro Line
Information about Retro Line on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Retro Line is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Typical reasons to choose Retro Line include refreshing faded trim, updating small details and building a sympathetic restomod that still looks in keeping with a classic Porsche.
- Common issues when changing these parts include faded finishes, cracked plastics, rattles, and fitment differences between model years, often made worse by reusing old clips and fixings.
- Confirm your exact model year and interior or exterior layout before ordering, as small design changes between generations can affect how well parts fit.
- Many upgrades are designed to blend in visually and can usually be reversed later if you keep your original Porsche parts and hardware.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Accessories — Porsche accessories are typically chosen to add practicality, comfort or a personal touch, from storage and mounts to subtle styling pieces; where Retro Line options are offered, they aim to complement the factory interior and trim rather than look out of place.
- Check whether accessories need drilling or permanent modification, and whether they can later be removed without marks.
- Always confirm compatibility with your specific Porsche model, interior type and any factory options before ordering.
Badges & Emblems — Badges and emblems are often refreshed to replace faded, chipped or missing items and to fine-tune the exterior look; Retro Line pieces in this area are intended to sit comfortably alongside original Porsche styling.
- Confirm how a badge is fixed (adhesive, clips or pins) and whether it matches the original mounting points on your Porsche.
- Take time to remove old adhesive carefully to avoid scratching surrounding paint or trim.
Rear / Boot lid Badges — Rear boot-lid badges help define the identity of your Porsche; replacements are fitted when original lettering has faded, lost chrome or been disturbed during paintwork or repairs.
- Check whether new badges are supplied as individual letters or a complete script, and whether templates or tape are included for alignment.
- Ensure old adhesive is fully removed and the surface is clean so the new badge sits level and adheres correctly.
Side Decals / Badges — Side decals and badges allow owners to add period script, model names or stripes, or to replace graphics that have shrunk, peeled or discoloured over time.
- Confirm that the decal kit is sized for your specific Porsche body shape and that fitting instructions or guides are followed.
- Good surface preparation helps prevent edge lifting, bubbles and trapped dirt that can mark the paint underneath.
Exterior Styling / Spoilers — Exterior styling and spoilers are changed to update the look, improve aerodynamics or follow a particular Porsche theme; Retro Line parts in this area are generally chosen to give a heritage-inspired appearance while working with existing body lines.
- Many spoilers and styling parts require painting; always test fit on the car before paint or modification, as painted parts are difficult to return.
- Check how the part mounts, and whether any drilling, brackets or seal changes are needed to avoid rattles, poor panel gaps or water ingress.
Explore Retro Line at Design911
View the current Retro Line range for Porsche at Design911, then filter by model and category to narrow down to the right parts for your car.
Fits
Porsche 968 1992-95 Manual cars
Porsche 968 CS 1992-95 Manual cars
Porsche 968 TURBO S 1992-95 Manual cars
Porsche 944 TURBO 2.5L 1986-91
Engine Type: M44.50 / M44.51 / M44.52
Porsche 944S2 3.0L 1989-91
Engine Type: M44.43 / M44.44 / M44.60 / M44.41
This all aluminium, high efficiency radiator is uprated by 30% over original item.
Fitment as per original with no modification necessary.
• The units are fully tig welded and pressure tested upon completion and come with the standard 12 month warranty (Road usage only).
• All of the 944 turbo radiators are manufactured using upgraded 50mm aluminium cores.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95110603107
The product you are viewing cross references to these numbers
- Porsche 944S2 3.0L 16V 1989-91
- Porsche 944 Turbo 2.5L 8V 1985-88
- Porsche 944 Turbo 2.5L 8V 1989-91
- Porsche 944 Turbo S 2.5L 8V 1988
- Porsche 968 3.0L 1992-94
- Porsche 968 Sport 3.0L 1994-95
- Porsche 968 CS 3.0L 1993-95
- Porsche 968 Turbo S 3.0L 1993-94
Three integral oil cooler options available
• Oil cooler in right hand tank (as you look at outlets)
• Oil cooler in left hand tank (as you look at outlets)
• No oil cooler in either tank

Fits
Porsche 928 S4 - 1987 to 1992 - Manual
Porsche 928 GT / GTS - 1989 to 1995 - Manual
This all aluminium, high efficiency radiator is uprated by 30% over original item.
Fitment as per original with no modification necessary.
This radiator comes complete with integral oil cooler (choose options available) WITHOUT cowl brackets on each tank.
• The units are fully tig welded and pressure tested upon completion and come with the standard 12 month warranty (Road usage only).
• All of the 928 radiators are manufactured using upgraded 50mm aluminium cores.
• Oil cooler bosses on our 928 radiators are as per OEM for simple bolt on bolt off connection.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
928106043
The product you are viewing cross references to these numbers
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Three integral oil cooler options available
• Oil cooler in right hand tank (as you look at outlets)
• Oil cooler in left hand tank (as you look at outlets)
• No oil cooler in either tank

Fits
Porsche 928 4.5ltr - 1978 to 1982 - Manual
Porsche 928 S 4.7ltr - 1981 to 1983 - Manual
Porsche 928 S2 4.7ltr - 1984 to 1986 - Manual
This all aluminium, high efficiency radiator is uprated by 30% over original item.
Fitment as per original with no modification necessary.
This radiator comes complete with integral oil cooler (choose options available) with cowl brackets on each tank.
• The units are fully tig welded and pressure tested upon completion and come with the standard 12 month warranty (Road usage only).
• All of the 928 radiators are manufactured using upgraded 50mm aluminium cores.
• Oil cooler bosses on our 928 radiators are as per OEM for simple bolt on bolt off connection.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92810604
The product you are viewing cross references to these numbers
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
Twin integral oil coolers - One each tank

Fits
Porsche 928 4.5ltr - 1978 to 1982 - Automatic (M249)
Porsche 928 S 4.7ltr - 1981 to 1983 - Automatic (M249)
Porsche 928 S2 4.7ltr - 1984 to 1986 - Automatic (M249)
This all aluminium, high efficiency radiator is uprated by 30% over original item.
Fitment as per original with no modification necessary.
This radiator comes complete with integral oil cooler. This radiator comprises of twin oil coolers, 1 in each end tank with cowl brackets on each tank.
• The units are fully tig welded and pressure tested upon completion and come with the standard 12 month warranty (Road usage only).
• All of the 928 radiators are manufactured using upgraded 50mm aluminium cores.
• Oil cooler bosses on our 928 radiators are as per OEM for simple bolt on bolt off connection.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92810604002
The product you are viewing cross references to these numbers
- Porsche 928 4.5L 1978-82
- Porsche 928S 4.7L 1981-83
- Porsche 928S2 4.7L 1984-86
Twin integral oil coolers - One each tank

Fits
Porsche 928 S4 - 1987 to 1992 - Automatic (M249)
Porsche 928 GT / GTS - 1989 to 1995 - Automatic (M249)
This all aluminium, high efficiency radiator is uprated by 30% over original item.
Fitment as per original with no modification necessary. Pipe connections / unions need to be transferred from old radiator.
This radiator comes complete with integral oil cooler. This radiator comprises of twin oil coolers, 1 in each end tank WITHOUT cowl brackets on each tank.
• The units are fully tig welded and pressure tested upon completion and come with the standard 12 month warranty (Road usage only).
• All of the 928 radiators are manufactured using upgraded 50mm aluminium cores.
• Oil cooler bosses on our 928 radiators are as per OEM for simple bolt on bolt off connection.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92810604301
The product you are viewing cross references to these numbers
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
- Porsche 928GTS 5.4L 1992-95
Fits:
Porsche 911 / 911 S / 911 Carrera 3.0ltr - 1977
Porsche 911 SC - 1978 to 1983
Complete fuel pump harness including relay socket, Weco connectors and Bosch rubber boots for the fuel pump connection.
Fuel pump relay included
Diagram ref no 4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161207214
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC

Fits:
Porsche 911 - 1969 to 1975
Power supply harness.
This harness in installed in the trunk and supplies both doors, it has a round female 6 pole connector on the left and right.
It is connected to the front fusebox and ground studs (8mm eyelet) on both sides.
Other side of this harness needs to be connected to the terminal strip inside the door.
Handmade to concourse quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90161207102
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera

Fits:
Porsche 911 - 1972 to 1973
Complete tunnel harness with original colour coded wiring.
Runs from front fusebox / gauges through tunnel to the engine bay.
Harness will exactly fit like the original.
Wire tube and oil resistant tape as original and the terminals have rubber sleeves.
Harness comes with detailed connection instructions.
2 x new 6 pole male connector , 1 x 14 pole male connector, fuel pump connector (rear) rubber sleeve and grommet included.
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9116120
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Fits:
Porsche 911 - 1971
Complete tunnel harness with original colour coded wiring.
Runs from front fusebox / gauges through tunnel to the engine bay.
Harness will exactly fit like the original.
Wire tube and oil resistant tape as original and the terminals have rubber sleeves.
Harness comes with detailed connection instructions.
2 x new 6 pole male connector , 1 x 14 pole male connector, fuel pump connector (rear) , rubber sleeve and grommet included.
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Click 'Zoom in' for large parts diagram.
Diagram ref no 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9116120
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Fits:
Porsche 911 - 1970
Available for Bosch or Motorola Regulators
Complete engine fuse panel harness.
Mounted on fuse panel frame with original colour coded wiring.
Harness will exactly fit like the original with wire tube and oil resistant tape as original.
Terminals have rubber sleeves and harness comes with detailed connection instructions.
With new 2 x 14 pole male connectors, relay socket, 2 pole female connector.
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Click 'Zoom in' for large parts diagram.
Diagram ref no 4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161200
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911/ 912 - 1965 to 1974
Harness in front trunk, connects on left side in trunk to main harness (for double lamps in hood)
As original colored wiring.
Original neoprene terminal sleeves used, (no shrink wrap)
Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
Gasoline, oil, battery acid, engine coolant resistant.
High flex sleeving ,very resistant to solvents and free of halogen, Sulphur and phosphorous.
Handmade to concourse quality.
Diagram ref no 16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90161204200
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 - 1969 to 1973
Wire harness for power windows (this loom is mounted in the door) and connects to the power supply harness by a 6 pole male connector.
Other side of this harness needs to be connected to the terminal strip inside the door.
One loom required for each door
Handmade to concourse quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90161207103
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Fits:
Porsche 911 - 1969 to 1986 Targa Only
Harness for interior lights (Targa version)
Connects to main harness on right side under window.
As original coloured wiring.
Original neoprene terminal sleeves used, (no shrink wrap)
Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
Gasoline, oil, battery acid, engine coolant resistant.
High flex sleeving ,very resistant to solvents and free of halogen, sulphur and phosphorous.
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Diagram ref no 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90161203541
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
Fits:
Porsche 911 - 1969 to 1973
Complete harness for front fog-lights with original spiral colour coded wiring.
Harness will exactly fit like the original.
Wire tube and oil resistant tape as original and the terminals have rubber sleeves.
Relay included.
Harness comes with detailed connection instructions.
As original coloured wiring.
Original neoprene terminal sleeves used, (no shrink wrap)
Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
Gasoline, oil, battery acid, engine coolant resistant.
High flex sleeving is very resistant to solvents and free of halogen, sulphur and phosphorous.
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91161202700
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Fits:
Porsche 911 - 1971 to 1973
Complete main harness with original colour coded wiring.
Runs from front fusebox to dashboard and harness will exactly fit like the original.
Wire tube and oil resistant tape are as original and terminals have rubber sleeves.
Harness comes with detailed connection instructions.
• 2 x Single bulb holder for headlight signal lights included.
• Fuel pump connector, boot and cable entry grommet included.
As original coloured wiring.
Original neoprene terminal sleeves used, (no shrink wrap)
Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
Gasoline, oil, battery acid, engine coolant resistant.
High flex sleeving is very resistant to solvents and free of halogen, sulphur and phosphorous.
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9116120
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)

Fits:
Porsche 911 - 1970
Complete main harness with original colour coded wiring.
Shown fuseboxes are not included
Runs from front fusebox to dashboard and harness will exactly fit like the original.
Wire tube and oil resistant tape are as original and terminals have rubber sleeves.
Harness comes with detailed connection instructions.
• 2 x Single bulb holder for headlight signal lights included.
• Fuel pump connector, boot and cable entry grommet included.
As original coloured wiring.
Original neoprene terminal sleeves used, (no shrink wrap)
Very high quality flex automotive grade wiring, ISO6722:2002 / DIN72551/6 / EEC directive 2000/53
Gasoline, oil, battery acid, engine coolant resistant.
High flex sleeving is very resistant to solvents and free of halogen, sulphur and phosphorous.
Special order made to order parts please allow 2 – 4 weeks
Handmade to concourse quality.
Click 'Zoom in' for large parts diagram.
Diagram ref no 2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
9116120
The product you are viewing cross references to these numbers
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)