Rennline

Rennline Seat Switch Bezel.
SET OF 2

Fits:
Porsch 911/964/993/928/944
*** With Factory 3 Switch Power Seats

Aluminum seat switch bezels are a sure way to brighten up your car’s interior and make it stand out in a crowd. Unlike any product on the market, these bezels are a direct replacement of the factory plastic units found on most 1978-98 Porsches with power seats. Simply unscrew the original and install these in their place for a 2 minute interior upgrade.

Sold in sets of 2 and are available for most factory seats with a 3 switch configuration.

Note: Pictures may not show actual product.

Rennline Seat Switch Bezel.
SET OF 2

Fits:
Porsche 911/964/993/928/944
*** With Factory Dual Switch Power Seats

Aluminum seat switch bezels are a sure way to brighten up your car’s interior and make it stand out in a crowd. Unlike any product on the market, these bezels are a direct replacement of the factory plastic units found on most 1978-98 Porsches with power seats. Simply unscrew the original and install these in their place for a 2 minute interior upgrade.

Sold in sets of 2 and are available for most factory seats with a 2 switch configuration.

Note: Pictures may not show actual product.

Rennline Aluminium Shift Knob.

Fits:
Porsche 964/993/996/997/Boxster/Cayman w/manual transmission

Unlike most shift knobs on the market, Rennline’s are far from “universal”. Universal usually means that it will nearly fit some applications and will not fit the rest. All Rennline shift knobs are CNC machined to fit specific applications, eliminating the concern of missing a gear due to loose or detached shift knob. There is no need to cut, drill, or modify your factory shift lever to install. All of our shift knobs are the ergonomically correct 1.875” diameter and have rubber trim rings installed at the base.

Available in Silver and black finishes, for cars with or without integrated shift boots.

For Installation instructions CLICK HERE

Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

I141

The product you are viewing cross references to these numbers

Rennline Aluminium Shift Knob.

For Porsche 911/912/930 1965-1986 87-89 w/ manual transmission . * on 87-89 cars, please measure shifter shaft to ensure fitment as several shifter shafts were available through those model years. The hole in our knob measures .595"

Unlike most shift knobs on the market, Rennline’s are far from “universal”. Universal usually means that it will nearly fit some applications and will not fit the rest. All Rennline shift knobs are CNC machined to fit specific applications, eliminating the concern of missing a gear due to loose or detached shift knob. There is no need to cut, drill, or modify your factory shift lever to install. All of our shift knobs are the ergonomically correct 1.875” diameter and have rubber trim rings installed at the base.

Available in Silver and black finishes, for cars with or without integrated shift boots.

Note: Pictures may not show actual product.

Rennline Shifter Riser 4"

Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman
Porsche 996
Porsche 997

Rennline's Shift Tower Riser solves the problem of the shifter being too far away from the steering wheel for fast precision shifts demanded by hard track driving. By installing this shift riser you can enjoy quicker and easier shifting, with a feel similar to the factory cup cars. This unit is machined from aircraft grade aluminum and available in anodize or powder coat black finishes. All hardware included and installs in minutes with no drilling required. Unlike other units on the market, emergency brake removal NOT REQUIRED.

Note: This unit is not intended for use with the plastic center console installed.

Note: Pictures may not show actual product.

Rennline Shifter Riser 7"

Fits:
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman

Rennline's Shift Tower Riser solves the problem of the shifter being too far away from the steering wheel for fast precision shifts demanded by hard track driving. By installing this shift riser you can enjoy quicker and easier shifting, with a feel similar to the factory cup cars. This unit is machined from aircraft grade aluminum and available in anodize or powder coat black finishes. All hardware included and installs in minutes with no drilling required. Unlike other units on the market, emergency brake removal NOT REQUIRED.

Note: This unit is not intended for use with the plastic center console installed.

Note: Pictures may not show actual product.

Aluminium emergency/ hand brake & heater control block-off plate.

Fits:
Porsche 911/912/930 1965-89

Rennline's emergency brake & heater control block-off plate will dress up the interior of your dedicated track 911 that has the emergency brake and heater controls removed from the center tunnel between the seats. This aluminium block-off plate comes pre-drilled and with stainless steel mounting hardware for a quick and easy installation.

Note: Pictures may not show actual product.

Rennline Aluminum Shift Linkage Cover.



Fits:
Porsche 911/912/930 1965-89

The Rennline shift coupler cover is an attractive replacement for the stock cover. The Rennline cover is made of perforated 1/8" aluminium and comes with stainless steel hardware. This is the perfect item to jazz up the stripped-out interior of your track 911 or give that street 911 a race car look.

Note: Pictures may not show actual product.

Rennline windscreen visors, Red

Fits:
Porsche 911
Porsche 964
Porsche 993

Rennline's windshield visors and graphics are available in several colours and can be purchased as just a visor, just a graphic, or both. This particular product is just the visor which provides an aggressive look for your car, as well as protection from the sun. Unlike most similar products on the market, the Rennline visors are specifically designed for the windshield of each model automobile, minimizing the amount of trimming needed.

Note: Pictures may not show actual product.

Rennline windscreen visors.

Fits:
Porsche 996
Porsche 997
Porsche 987 Boxster
Porsche 987 Cayman
Porsche 991

This particular product is just the visor which provides an aggressive look for your car, as well as protection from the sun. Unlike most similar products on the market, the Rennline visors are specifically designed for the windshield of each model automobile, minimizing the amount of trimming needed.

Note: Pictures may not show actual product.

Rennline Tow hook receiver - Billet license plate mount.



Fits:
Porsche Panamera for European models only

Most automobiles come from the factory without the provisions for front license plates due to the fact that many states and countries do not require a front plate.The last thing you want to do is drill holes in your very expensive bumper cover just to mount that ugly front tag. Rennline’s billet license plate mount eliminates the need to drill and allows you to easily remove your plate for shows, track events or anytime it is not needed. This design allows you to adjust your plates location by height, width and angle. Unlike any other designs on the market, we have engineered this system to be easily removed from the car without first removing your license plate and plate frame. All components are stainless, powder coated or anodized to withstand daily driving conditions.

Will not work on cars with parking sensors

Note: Pictures may not show actual product.

Rennline Tow hook receiver - Billet license plate mount.



Fits:
Porsche 991 European models Only

Most automobiles come from the factory without the provisions for front license plates due to the fact that many states and countries do not require a front plate.The last thing you want to do is drill holes in your very expensive bumper cover just to mount that ugly front tag. Rennline’s billet license plate mount eliminates the need to drill and allows you to easily remove your plate for shows, track events or anytime it is not needed. This design allows you to adjust your plates location by height, width and angle. Unlike any other designs on the market, we have engineered this system to be easily removed from the car without first removing your license plate and plate frame. All components are stainless, powder coated or anodized to withstand daily driving conditions.

Will not work on cars with parking sensors

Note: Pictures may not show actual product.

Tow Hook Receiver - Billet License Plate Mount.



Fits:
Porsche 996
Porsche 997
Porsche 986 Boxster
Porsche 987 Boxster
Porsche 987 Cayman

Most automobiles come from the factory without the provisions for front license plates due to the fact that many states and countries do not require a front plate.The last thing you want to do is drill holes in your very expensive bumper cover just to mount that ugly front tag. Rennline’s billet license plate mount eliminates the need to drill and allows you to easily remove your plate for shows, track events or anytime it is not needed. This design allows you to adjust your plates location by height, width and angle. Unlike any other designs on the market, we have engineered this system to be easily removed from the car without first removing your license plate and plate frame. All components are stainless, powder coated or anodized to withstand daily driving conditions.

Note: Pictures may not show actual product.

Tow Hook Receiver - Billet License Plate Mount.



Fits:
Porsche 964 1989-94
Porsche 993 1995-98
Porsche 944

Most automobiles come from the factory without the provisions for front license plates due to the fact that many states and countries do not require a front plate.The last thing you want to do is drill holes in your very expensive bumper cover just to mount that ugly front tag. Rennline’s billet license plate mount eliminates the need to drill and allows you to easily remove your plate for shows, track events or anytime it is not needed. This design allows you to adjust your plates location by height, width and angle. Unlike any other designs on the market, we have engineered this system to be easily removed from the car without first removing your license plate and plate frame. All components are stainless, powder coated or anodized to withstand daily driving conditions.

Note: Pictures may not show actual product.

Rennline Tow hook receiver - Billet license plate mount.



Fits:
Porsche 957 Cayenne 2006-10 European models

Most automobiles come from the factory without the provisions for front license plates due to the fact that many states and countries do not require a front plate.The last thing you want to do is drill holes in your very expensive bumper cover just to mount that ugly front tag. Rennline’s billet license plate mount eliminates the need to drill and allows you to easily remove your plate for shows, track events or anytime it is not needed. This design allows you to adjust your plates location by height, width and angle. Unlike any other designs on the market, we have engineered this system to be easily removed from the car without first removing your license plate and plate frame. All components are stainless, powder coated or anodized to withstand daily driving conditions.

Note: Pictures may not show actual product.