Rennline

Rennline Billet Dash Knobs - Rear Defrost.

Fits:
Porsche 911 65-73
Porsche 912
Porsche 914

Is your 911 dashboard missing a knob or two, or are yours cracked and faded? Perhaps you are just looking to put a slightly modern touch on your 911. These billet aluminum dashboard knobs will help! Anodized black and then engraved, these will give you the perfect blend of subtlety and style. Available in every factory configuration for both early and late 911's. Knobs priced individually.

Rennline Billet Dash Knobs - Trunk/Gas Pull.

Fits:
Porsche 911 65-73
Porsche 912
Porsche 914

Is your 911 dashboard missing a knob or two, or are yours cracked and faded? Perhaps you are just looking to put a slightly modern touch on your 911. These billet aluminum dashboard knobs will help! Anodized black and then engraved, these will give you the perfect blend of subtlety and style. Available in every factory configuration for both early and late 911's. Knobs priced individually.

Rennline Billet Dash Knobs - Trunk/Gas Pull.

Fits:
Porsche 911/912
Porsche 964
Porsche 993

Please note: Porsche on some models made this knob in a different size. Please measure your thread prior to purchase. This knob is a M6x1.0 thread, some 911's came with a M5x.08 if this is the case in your car please purchase the DA91 instead

Is your 911 dashboard missing a knob or two, or are yours cracked and faded? Perhaps you are just looking to put a slightly modern touch on your 911. These billet aluminum dashboard knobs will help! Anodized black and then engraved, these will give you the perfect blend of subtlety and style. Available in every factory configuration for both early and late 911's. Knobs priced individually.

Rennline Billet Dash Knobs - Fog Lights.

Fits:
Porsche 911 74-89
Porsche 912
Porsche 914

Is your 911 dashboard missing a knob or two, or are yours cracked and faded? Perhaps you are just looking to put a slightly modern touch on your 911. These billet aluminum dashboard knobs will help! Anodized black and then engraved, these will give you the perfect blend of subtlety and style. Available in every factory configuration for both early and late 911's. Knobs priced individually.

Rennline Billet Dash Knobs - Window Wiper.

Fits:
Porsche 911 74-89
Porsche 912
Porsche 914

Is your 911 dashboard missing a knob or two, or are yours cracked and faded? Perhaps you are just looking to put a slightly modern touch on your 911. These billet aluminum dashboard knobs will help! Anodized black and then engraved, these will give you the perfect blend of subtlety and style. Available in every factory configuration for both early and late 911's. Knobs priced individually.

Rennline Billet Dash Knobs - Headlights.

Fits:
Porsche 911 74-89
Porsche 912
Porsche 914

Is your 911 dashboard missing a knob or two, or are yours cracked and faded? Perhaps you are just looking to put a slightly modern touch on your 911. These billet aluminum dashboard knobs will help! Anodized black and then engraved, these will give you the perfect blend of subtlety and style. Available in every factory configuration for both early and late 911's. Knobs priced individually.

Rennline Billet Dash Knobs - Rear Defrost.

Fits:
Porsche 911 74-89
Porsche 912
Porsche 914

Is your 911 dashboard missing a knob or two, or are yours cracked and faded? Perhaps you are just looking to put a slightly modern touch on your 911. These billet aluminum dashboard knobs will help! Anodized black and then engraved, these will give you the perfect blend of subtlety and style. Available in every factory configuration for both early and late 911's. Knobs priced individually.

Rennline Billet dash knobs - Cigarette lighter. 



Fits:
Porsche 911 74-89
Porsche 912
Porsche 914

Is your 911 dashboard missing a knob or two, or are yours cracked and faded? Perhaps you are just looking to put a slightly modern touch on your 911. These billet aluminium dashboard knobs will help! Anodized black and then engraved, these will give you the perfect blend of subtlety and style. Available in every factory configuration for both early and late 911's. NOTE: Knobs priced individually.

Rennline Fire Extinguisher Mount - Porsche - EZ Adjust.

Fits:
Porsche 911 1974 >>
Porsche 964
Porsche 993
Porsche 996
Porsche 986/987/981 Boxster
Porsche 986/987/981 Cayman
Porsche 997
Porsche 991

Available in 2 colour combinations:
- Black extinguisher mount and black slider
- Silver extinguisher mount and black slider
See the images in gallery for detailed view.

Fire extinguishers are mandatory in all cars that will see the track and should be mandatory in all street cars. There's no worse feeling then watching your car burn to the ground without the ability to do anything about it. Unlike any extinguisher mount on the market, this two-piece design allows you to remove all visible components in seconds to revert to a factory look. While other rail mount systems are fixed and limit your seat travel, our EZ-Adjust Slider allows you to make a wide range of seat adjustments on the fly. Installs in minutes and is designed to fit all types of seats, from lightweight manual race seats to the most complex electric seats from Porsche.

• 2-piece design
• Easy-to-remove components
• EZ-Adjust Slider for seat adjustment
• Installs in minutes
• Fits wide variety of seats

Note: Pictures may not show actual product.

Rennline's carbon fibre Heater Block Off Shrouds are a great accessory to tidy up your engine bay after eliminating your heater.



Fan Shroud heater blockoff plates. For sealing the heater ducts on 911 engine 2.0 to 3.0 liter.

Fits:
Porsche 911 2.0L-3.0L

Price per pair

Rennline Race Spec Camber Plate FRONT Top Mount Set.
SET OF 2



Fits:
Porsche 991 / 981 / 718 2WD incl GT3/GT4 FRONT

If you are looking for maximum performance and adjustability from your 991/981 you are going to want to be in complete control of your camber settings. Designed to work with non-OEM suspension options such as JRZ, Moton and GT3/Cup struts, Rennline Race Spec Camber Plates will give you perfect combination of adjustability and durability.

this kit will fit the Cayman GT4 and 991 GT3 with OEM dampers.

These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.

Designed for anyone from the weekend enthusiast to the dedicated track day veteren, these camber plates allow you to add camber in the optimum way. Swapping to GT3-style lower control arms can increase camber significantly, but it comes at the cost of reduced caster without replacing additional components. Our Race Spec Camber Plates solve this issue by adding camber at the top of the strut, minimizing geometry changes to other areas of the suspension system.

• 1.1* increase in negative camber
• CNC machined housings
• Designed for use with non-OEM style coilovers and struts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

S55

The product you are viewing cross references to these numbers

Rennline Clubsport Camber Plate Top Mount Set.
SET OF 2



Fits:
Porsche 991/981/718 2WD except GT3/GT4

Whether you use your car on the street or the track, optimum camber settings are critical for both performance and tire wear during spirited street driving and at the track. These plates were designed for 991/981 owners looking to achieve additional camber without needing to change to GT3-style adjustable control arms. By using an offset bearing housing, the range of possible camber adjustment is shifted to provide an additional 1.1 degrees of camber at all OEM-equivalent settings.

These mounts are CNC machined in house from 6061-T6 billet aluminum for maximum strength while keeping weight to a minimum. Precision teflon lined bearings are held in place with a two-part threaded housing which eliminates the issues commonly associated with camber plates that utilize a snap ring such as excessive noise and premature failure. This also minimizes camber changes under load meaning you have more precise alignment settings when it matters most.

Designed specifically for cars using factory shocks and any aftermarket setup designed to work with OEM mounts, this is the easiest and simplest way to gain camber in your 991/981 car. In addition, by making camber changes at the top of the strut instead of at the control arm, caster changes are minimized resulting in an easier setup and minimizing necessary modifications.

• 1.1* increase in negative camber at factory settings results in greater range of adjustment
• CNC machined housings
• Fully compatible with factory and aftermarket shock/spring kits utilizing factory mounts
• Equalize tire wear and maximize traction at once
• Precision teflon-lined spherical bearing
• Reduced compliance results in more precise handling and alignment

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

S54

The product you are viewing cross references to these numbers

Rennline Sealed REAR Top Mounts.
SET OF 2

Fits
Porsche 996 C2 3.4L / 3.6L (2 Wheel Drive)
Porsche 997 C2 3.6L / 3.8L (2 Wheel Drive)

Keep optimal rear suspension geometry at the track and during spirited street driving with Rennline Sealed Rear Strut Mounts. Factory bushings are designed to be compliant in an attempt to make the car more marketable, but if you are here you already know they could have created a more performance oriented design. Our strut mounts feature Teflon-lined spherical bearings mounted in precision machined housings to ensure a perfect fit and unbeatable quality. Unlike almost every other unit on the market, Rennline mounts include a dust boot to completely seal the bearing from stones and road grime and make our mounts a cut above the rest.

Will not work with factory suspension setup. For aftermarket coilovers only. Designed for use with conical style spring hats. If you have the cup style, see our conical style below which you will need.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

S26

The product you are viewing cross references to these numbers

Rennline Throttle Extension - Heel/Toe for LHD Cars



These throttle extensions are designed to work with Rennline gas pedals (# P70, P71, & P73).

All throttle extension kits now come with both heel and toe extensions that can be used individually or together. Throttle pedal cover is not included with this kit.

Depending on your driving style, this throttle extension kit can be used as a heel, toe, or heel/toe configuration. It's easy to install and can be added to most Rennline gas pedals. Available in red, silver, or black.


Note: Pictures may not show actual product.

If you have any questions as to whether or not this will work with your pedal, please contact us.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PE7071HT

The product you are viewing cross references to these numbers