Rennline

Lower dash delete cover, in Black.



Fits:
Porsche 911 / 912 / 930 1975-85

Is the knee pad on your 1974-1985 911 becoming an eye sore? Original parts are getting rare, and extremely expensive. This aluminum knee pad panel has been designed to mimic the factory contours, but will last forever. We love reducing weight, so our design weighs in at just 1.6 pounds; one pound lighter than your factory installed piece.
Comes in black textured powder coat to complement existing factory dash components.

Rennline ignition switch bezel. Porsche 1969-73 911/912 28mm



Fits:
Porsche 911 1969-73
Porsche 912 1969-73

Is your plastic key switch surround faded and scratched up from years of abuse? If so, Rennline has the answer with this beautiful billet aluminium replacement that will last forever and dress up your dash. This surround will also complement our billet aluminium door handles and lock knob sets. Machined out of aircraft grade aluminium and available in silver or black anodized finishes.

ExactFit Magnetic Phone Mount



Fits:
Porsche 944 1985.5>> Dash Mount


In this day and age, everyone has a cell phone; our lives have come to revolve around them. The problem is that there is no great place in our cars to store them. The market is full of flimsy universal mounts, vent mounts, and mounts that clip or stick to areas of your interior which can and will cause damage. Rennline has solved this problem with our ExactFit Magnetic Phone Mounts. These mounts are tailored to your specific model and do not attach to any part of your interior that will cause harm. Most of our mounts are bolt-in units that can be easily installed in minutes. All critical components are manufactured from metal, so they will not crack or break like most plastic units available.

This fits 944's manufacturer from February 1st, 1985 on.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PM0123

The product you are viewing cross references to these numbers

Rennline Strut tower brace, 2 Point.

Fits:
Porsche 911/912/930 1966-89

One of the easiest and most cost-effective ways to improve your car's handling is the installation of a Rennline strut tower brace. These braces bridge both shock towers, eliminating virtually all camber change that occurs during hard cornering. Not all cars are the same, so Rennline has made their braces fully. adjustable, allowing you to set a desired amount of pre-stress. Constructed of lightweight aircraft grade aluminum with 5-axis fully CNC machined billet aluminum brackets and FK Rod Ends. Rennline strut tower braces bolt in and out in minutes and require no drilling. Whether you're on the street or on the track you'll feel the difference immediately.

For Installation Instructions please click here. Installation Instructions

Rennline ignition switch bezel. replacement for the plastic version 9116131600170B



Fits:
Porsche 911 1974-89
Porsche 964
Porsche 993

Is your plastic key switch surround faded and scratched up from years of abuse? If so, Rennline has the answer with this beautiful billet aluminium replacement that will last forever and dress up your dash. This surround will also complement our billet aluminium door handles and lock knob sets. Machined out of aircraft grade aluminium and available in silver or black anodized finishes.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

I27

The product you are viewing cross references to these numbers

Rennline billet aluminium window cranks.
Sold as a pair, hardware included.

Fits:
Porsche 911/912/930 1965 - 1989 * With manual window mechanisms

Sick of looking at those cracked or faded factory plastic window cranks? Are the plastic splines stripped out and non-functional? We have the solution. Rennline billet aluminium manual window cranks feature quality craftsmanship for superb fit and finish. The perfect complement to your aluminium handles, pedals or other aluminium accessories. These cranks are available in a clear or black anodized finish. Fits all 911, 912 and 930 cars with manual windows from 1965-89. Installs in minutes with basic hand tools. 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

DH01

The product you are viewing cross references to these numbers

Rennline Radio Block-Off Plate.



Fits:
Porsche 911/912/930 1965 - 1985

If you're one of those enthusiasts who would rather listen to the sweet sound of that flat 6 than the radio, then we have the solution for you. By popular request, we have developed a radio delete plate similar to the one found on the later RS and RS Americas. Installs easily with two retainers and two lock nuts, and powdercoated in a semi-textured black for a clean OEM look.

ExactFit Magnetic Phone Mount.



Fits:
Porsche 911 / 964 / 993

Fits onto fuel gauge
If you have RHD car your phone will be on the centre console side. IF your car is LHD your phone will be on the driver's door side.


In this day and age, everyone has a cell phone; our lives have come to revolve around them. The problem is that there is no great place in our cars to store them. The market is full of flimsy universal mounts, vent mounts, and mounts that clip or stick to areas of your interior which can and will cause damage. Rennline has solved this problem with our ExactFit phone mounts. These mounts are tailored to your specific model and do not attach to any part of your interior that will cause harm. Most of our mounts are bolt-in units that can be easily installed in minutes. This particular is machined from billet aluminum and clamps around your clock making for a clean and simple installation.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PM0106RHD

The product you are viewing cross references to these numbers

Horn Button Trim Ring - Hockey Puck Steering Wheel



Fits:
Porsche 911/912 1965-1968

Looking to restore your Hockey Puck Horn Button? Rennline makes it easy with this chrome trim ring. Waterjet cut and stamped with custom tooling, this part is designed to drop right in, in place of your tired factory trim ring.

Shown with Stoddard Leather pad which is not included, but available separately.

Only works with Hockey Puck Steering wheel.
Does not work on Prototipo or other wheels.

Steering column support bushing - Nylon replacement for 91134702901 Porsche 911/912/930 1974-1989.



Does your 74-89 911/912/930 have the common slop, wiggle and/or rattle in the steering wheel? This is a common issue with these cars and is the result of a worn-out OE 91134702901 bearing liner. Rennline's new Steering Column Support Bushing installs in about 15 minutes and leaves you with a smooth/quite steering column. This is a big improvement over the factory replacement sleeve that takes hours to replace and is sure to fail again down the road.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

I69

The product you are viewing cross references to these numbers

Rennline Front bumper wire mesh grill kit Black.



Fits:
Porsche 95B.1 Macan / Macan S 2014-2018
(only for vehicles with Sport Design kit)


One of Porsche's biggest design flaws on the water cooled cars is the bumper air intakes. With the current design, the radiators are completely exposed and become magnets for road debris, leaves, and rocks. The fins on the radiator will quickly become damaged or plugged translating into big dollar repairs. The only way to stop the inevitable is to install a Rennline Radiator Protection Grill Kit.

Why Rennline kits are the best:

• Rennline developed the "Original" Radiator protection system with years of proven results
Your car's nose already looks perfect, our kits install behind the louvers to retain a desired factory look
• No risk of paint damage due to misalignment or loose components like front mounted kits
• Rigid mount system that executes a true "protection system" not just aesthetic
• Unique screw and clip (some vehicle's don't require the clips, and simply install with screws) system that eliminates the need for adhesive, zip ties or other unreliable fastening technics.
• Powder coated aluminum resulting in the ultimate oxidation protection
• Millions of track miles and winning races have proven our mesh size will not affect airflow or cooling
• Every grill is pre-molded for your specific model resulting in a perfect fit every time
• Easy install, most kits take a total of an hour or less to install with basic hand tools. If removing your bumper cover seems intimidating, don't worry, average bumper removal time without a car lift is 10-15 mins
• Manufactured in the USA by Rennline, if you have a question we're here to help


* Cars with adaptive cruise control may require minor trimming with snips or scissors

Billet HVAC control panel.



Fits:
Porsche 65-89 911/912/930

The Rennline HVAC control panel is CNC milled from a billet aluminum block and anodized for a classic and elegant dash upgrade. Whether you're trying to clean up the dash on your early 911, or backdating the dash on your G-body car, these HVAC controls are sure to do the job. Featuring simplified markings and updated micro LED indicators, the unit pairs very well with our I12 Billet HVAC Knobs (not included but available separately). OEM plastic units are prone to scratching and fading, while these units are proven to stand the test of time. Installs easily to factory control mechanism.

Note: If installing in a 74-89 car, the dash must be backdated as these controls are smaller than the later controls.

Bushing kit for camber plate and monoball.



For use with Rennline 964/993 Camber Plates and Monoball Strut Mounts

Bushing Kits for use with Rennline 964/993 Camber Plates and Monoball Strut Mounts. Kit is available in m12 or m14 sizes and includes 2 flat spacer bushings and 4 stepped bushings. These are replacement bushings which are only needed when swapping to struts with a different shaft diameter (These are included with the 964/993 front and rear upper monoball/camber plates).

Solid Rear Subframe Bushing Kit.


Fits:
Porsche 993

Factory rubber suspension mounts have a lot of flexibility and cannot withstand the extreme loads applied to them during performance driving conditions. When these mounts flex, all of the suspension geometry changes making the car unstable and unpredictable. A very popular suspension upgrade is to replace these bushings with solid mounts like the ones found on the factory race cars. These kits are machined out of billet aluminium and come with the required hardware to install.


Note: Pictures may not show actual product.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SB5876

The product you are viewing cross references to these numbers