Rennline

RS door strap conversion carbon fibre. Fits LHD (left hand drive) Cars Only
Sold as a Pair

Available in Red, Black, Silver and Yellow 

Fits:
Porsche 987 Boxster / Boxster S - 2005 to 2012
Porsche 987 Cayman / Cayman S - 2006 to 2012
Porsche 997 Carrera / Carrera 4 Coupe - 2005 to 2012
Porsche 997 Carrera 2S / Carrera 4S Coupe - 2005 to 2012
Porsche 997 Turbo Coupe - 2006 to 2012
Porsche 997 GT3 - 2006 to 2012

Product Description

Rennline's new RS door pull kit for the 987/997 is a bolt in solution that allows you to convert your existing interior door handles to the highly coveted GT3RS pulls.
No longer do you have to piece together your own kit from the expensive OEM Porsche parts so save time and money with our complete kit.
Does not work with 911 Cabriolet or Targa.

To install, simply remove the one bolt holding the factory door handle and fit our RS Door Handle in place.

All components constructed from CNC machined 6061 aluminum or carbon fiber

• Comes with Black, Silver, Yellow and Red nylon pull straps
• Convert your existing door handle assemblies
• Everything you need in one kit
• OEM Fit and Finish
• All hardware included
• Install time is 1-2 hours with basic hand tools

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

DH55

The product you are viewing cross references to these numbers

Rear exhaust center and side muffler delete pipes. Porsche 991.1

Fits:
Porsche 991.1 Carrera / Carrera 4 - 3.4ltr
Porsche 991.1 Carrera 2S / Carrera 4S - 3.8ltr

Product Description
Increase the sound, gain some power and torque while reducing weight at the same time with our new race exhaust for the 991.1 Carrera. 
With this Race Exhaust both side and center mufflers are deleted and replaced with a free flowing straight pipe design that bolts directly to the manifolds. 
The result is a lightweight, higher performing and aggressive sounding exhaust that is not for the faint of heart. 
Designed and manufactured with the passion and quality you have come to expect from Rennline Automotive.

Not for road/street use

• Constructed from mandrel bent 304 stainless steel
• Weighs only 8lbs (50lbs less than stock system)
• Deletes side and center mufflers (check local laws regarding muffler removal)
• Retains catalytic converters
• Mounts directly to exhaust manifolds
• 5whp/9ft-lbs. gains over stock (3rd party dyno tested with stock intake/ECU software)
• Fits 991.1 naturally aspirated 3.4L-3.8L models only
• For off road use only
• Installs in less than two hours without rear bumper removal

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EX12

The product you are viewing cross references to these numbers

Rear exhaust muffler delete X pipe. Porsche 991.1



Fits:

Porsche 991.1 Carrera 2 / Carrera 4 3.4ltr
Porsche 991.1 Carrera 2S / Carrera 4S 3.8ltr

Product Description

Increase the sound and gain some mid-range torque while reducing weight with our new street exhaust for the 991.1 Carrera. 
This system deletes the center muffler while retaining the side suitcase mufflers which results in an OEM+ upgrade that is completely daily drivable. 

Designed and manufactured with the passion and quality you have come to expect from Rennline Automotive.

• Constructed from mandrel bent 304 stainless steel using state of the art manufacturing processes
• Deletes center muffler and retains side mufflers
• Increases exhaust note without sacrificing comfort
• Factory fit and finish
• Reuses OEM hardware
• Fits 991.1 naturally aspirated 3.4ltr and 3.8ltr models only
• Bumps up mid-range torque
• Installs in less than two hours without rear bumper removal

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

EX13

The product you are viewing cross references to these numbers

Billet aluminium short shift kit - Rennline Exactshift.



Fits:
Porsche 991 - Manual 

Product Description

Upgrade the gear shift on your 911. 

The factory assembly leaves more to be desired. On top of the long throw of the shift, components that are crucial in the feel and service life of the shifter housing are made of flimsy, brittle plastic which degrades and cracks over time. This leaves you with vague and inconsistent gear shifts, something you don't want in a sports car on or off the track.

• 3 levels of height/throw adjustment
• 20% throw reduction on shortest lever adjustment (18% & 14% in other positions)
• Fits all 991 models with manual transmission
• Compatibility with 981 coming summer 2023
• Installs in factory location and is compatible with center console, shifter cables, and shift boot
• Complete replacement for factory housing (OEM# 99142401001)
• Machined from 6061 billet aluminum
• Delrin bushings for durability and longevity 
• Accepts OEM shift knob

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TR11

The product you are viewing cross references to these numbers

Tunnel hole block off - Front tunnel.



Fits:
Porsche 911 / 912 / 930 1965-89

If you've stripped the interior in your 65-89 911/912/930 then you've probably noticed the unsightly hole to the right of your throttle pedal. Drop something in there, and you've got a full day project ahead of you to fish it out.
These block off plates are secured using self drilling screws, for a simple 2 minute installation.
Made from aircraft grade aluminium and available in anodized aluminium or black powder coat.
All necessary hardware is included.

Spring plate bushing kit with billet bracket.



Fits: 
Porsche 911 / 930 / 912 / 914 1965-89

Give those rear spring plates a much needed refresh and upgrade with our new bushing kit. Complete with machined billed aluminium housings and designed to reduce drag, improve handling of your street or track driven 911, and built with longevity and durability in mind. Replacing the rubber bushings with Delrin will retain optimal suspension geometry throughout the full range of motion while reducing compliance for a more direct feel.

Bushing housings CNC machined from 6061-T6 Aluminium
Close tolerance design for added rigidity
Durable anodized finish resists corrosion
Low friction Delrin bushing inserts
Stainless steel bushing race & hardware
Bushing race installation tool included
Direct replacement of the OEM bushings & housings
Outlasts factory components
Engraved Rennline logo

Front lower control arm bushing kit.



Fits:
Porsche 911 / 930 / 912 / 914 1965-89

Bring back that iconic Porsche handling with our new front lower control arm bushings. Designed to reduce drag, improve handling of your street or track driven 911, and built with longevity and durability in mind. Taking the rubber bushings out of the equation will retain optimal suspension geometry throughout the full range of motion while reducing compliance for a more direct feel.

• Bushing housings CNC machined from 6061-T6 Aluminum
• Close tolerance design for added rigidity
• Durable anodized finish resists corrosion
• Low friction Delrin bushing inserts
• Stainless steel bushing race & hardware
• Bushing race installation tool included
• Direct replacement of the OEM bushings
• Outlasts factory components
• Engraved Rennline logo

Carbon fibre ignition lead cover. 

Fits:
Porsche 964 
Porsche 993

Product Description
Replace your worn or missing spark plug wire cover on your 964/993 with our new carbon fiber version. The OEM pieces tend to degrade over time or sometimes end up disappearing.

Not only is our cover a great way to dress up your engine bay, but it’s also functional and keeps your plug wires neatly organized and protected.

• Hand laid carbon fibre with high gloss heat resistant finish
• Direct replacement for OEM unit
• Internal cable separators to hold plug wires
• Installs in minutes using basic hand tools
• Replaces OEM part number - 91160203500

Not only is our cover a great way to dress up your engine bay, but it’s also functional and keeps your plug wires neatly organized and 

t

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

M90

The product you are viewing cross references to these numbers

Exactfit magnetic phone mount.  The holder simply slides between the trim on the dash



Fits:
Porsche 992 - 2020 Onwards

Product Description
In this day and age, everyone has a cell phone; our lives have come to revolve around them. The problem is that there is no great place in our cars to store them. 

The market is full of flimsy universal mounts, vent mounts and mounts that clip or stick to areas of your interior which can and will cause damage. Rennline has solved this problem with our ExactFit Magnetic Phone Mounts. 
These mounts are tailored to your specific model and do not attach to any part of your interior that will cause harm. Most of our mounts are bolt-in units that can be easily installed in minutes. 

All critical components are manufactured from metal, so they will not crack or break like most plastic units available.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PM0197

The product you are viewing cross references to these numbers

Eccentric lock kit. Porsche 993 / 986 / 987 / 996 / 997



Fits:
Porsche 986 Boxster
Porsche 987 Boxster / Cayman
Porsche 993
Porsche 996
Porsche 997

Product Description
Rennline's Eccentric lock kits replaces the factory Eccentric adjustment system which are commonly known to cause loss of alignment during track use. These locks allow you to securely anchor the subframe side of your adjustable links, and ensures that your alignment does not change under heavy load.

Sold as a pair this includes 2 bolts, 2 lock nuts, 4 washers and 4 eccentric locks.

993 - Can be used on upper control arms, and lower toe arms.
996/997/986/987 - Can be used on lower control arms and lower toe arms.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

S40

The product you are viewing cross references to these numbers

Interior door handle trim, carbon fibre. 
Sold as a pair



Fits 
Porsche 986 Boxster - 1998 to 2004

Product Description

Rennlines,s carbon fibre door handle trims are a great way to give your 986 Boxster a subtle, modern upgrade. 
Years of use tend to take a toll on the factory trim pieces and leave your door handles looking tired.
Pair these with our carbon fibre armrests to complete the look, breathe new life and add a bit of style to your Boxster's interior.

• Hand laid carbon fibre with a high gloss finish
• Completely replaces the OEM door handle trim
• OEM fit and finish
• Installs in minutes
  
  

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

I122

The product you are viewing cross references to these numbers

Carbon fibre armrest. Porsche 986 Boxster
Sold as a pair



Fits
Porsche 986 Boxster - 1998 to 2004

Product Description
Rennline's carbon fibre armrests are a great way to give your 986 Boxster a subtle, modern upgrade. 
The OEM are rests are a high wear item and do not hold up well over time.

• Hand laid carbon fibre construction
• OEM Fit and Finish
• High gloss finish
• Completely replaces the OEM armrests
• Install in minutes 

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

I109

The product you are viewing cross references to these numbers

Adjustable rear toe arm. 
2 required per car. Sold Individually.



When lowering your 996/997/986/987 you will inevitably run into alignment issues with the rear toe settings. This problem is exacerbated by the fact that these cars are extremely sensitive to rear toe settings; just a degree or two can mean the difference between a tame daily driver and a twitchy racecar. When you require adjustments for these settings but you do not want to go to a fully solid spherical option like our S70.10.41 Rear Toe Control Arm w/ Bump Steer kit, this is the perfect alternative.

This kit includes everything you need to give your car that much needed adjustability in the rear toe settings. It includes one OEM rear outer tie rod and one FK teflon lined bearing equipped with adjustable jack nut to allow you to precisely dial your rear toe back into spec. By using the factory outer tie rod this setup will retain a more factory feel in terms of NVH and compliance while keeping you from burning through tires and having to deal with less than ideal handling.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

S62

The product you are viewing cross references to these numbers

Centre console side panels, carbon fibre. 



Fits:
Porsche 987 Boxster / Cayman
Porsche 997

Rennline’s new carbon fibre centre console panels are a great way to give your 911 or Cayman/Boxster an OEM+ look and a modern upgrade.

Made from high quality carbon fibre using the latest technology for a factory fit and finish while adding a bit of style.

• High quality carbon fibre construction, using the latest technologies
• Complete carbon fibre replacement
• OEM fit and finish
• Fits all 987/997 models
• Designed using dimensions from OEM panels
• OEM attachment points
• Installs in minutes using basic hand tools

Rennline ducktail rear spoiler. 

Fits

Porsche 991.1 - 2012 to 2016

Rennline’s new ducktail spoiler is a great way to give your 991 an OEM+ look with a modern spin on the classic Porsche design. Made from high-quality ABS plastic or hand laid carbon fiber using state of the art manufacturing techniques for a factory fit and finish. 

Product Description

• High quality construction, using the latest technologies
• Carbon Fiber version is hand laid with a high gloss UV protectant finish
• CAD designed using 3D scans of the factory decklid
• Modeled after the iconic Porsche ducktail design
• ABS version is easily paintable to color match to body
• Uses pre-installed industrial grade 3M VHB adhesive to install
• OEM fit and finish
• Fits all 991 models

Available in Carbon Fibre or ABS Plastic

Rennline RS door panel conversion kit. 

Fits 

Porsche 911 - 1965 to 1989

Porsche 964 Carrera 2 / 4 - 1989 to 1994

Product Description

Bring the interior of your 911 or 964 to the next level with our RS door panels. Designed from the ground up by our engineers to be the highest quality and most innovative off the shelf conversion kit available while retaining the iconic RS look and feel.

• Vacuum molded ABS door panels with a flocked finish
• Compatible with different configurations (electric/power windows, speakers, lock knobs etc.)
• Easy to upholster in any material to match your interior
• Complete bolt on solution with all necessary hardware included Arm rest with integrated pop-out storage compartment
• 74+interior door handle mechanisms required for use on '65-'73 (see below)
• Foam backed to reduce road noise
• RS door pulls in red nylon
• Billet lock knobs included
• Factory fit and finish
• 1965-73 cars require retrofit of 1974+ interior door handle mechanisms with associated Bowden cables, tension springs, and cable mounting clips. Part numbers and quantities for all necessary parts are below.

Porsche Part Numbers
911 531 083 00 – L and R relay levers
911 531 509 00 – L Bowden cable
911 531 510 00 – R Bowden cable
911 531 097 00 – vertical support (2)
911 531 099 00 – horizontal support (2)
900 145 028 02 – mounting screws (4)
999 507 009 02 – speed nut (4)
993 531 165 00 – tension spring (2)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

DH45

The product you are viewing cross references to these numbers