do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
OE Match
OE Match for Porsche
OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations
A Quick Look at OE Match
OE Match information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where OE Match is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Often chosen when owners want OE-equivalent quality with sensible running costs, especially for routine service and wear items.
- Typical reasons to replace include restoring reliability, addressing age-related wear, or refreshing multiple components during larger repair work.
- Common defects from incorrect application include noise, premature wear, leaks, or fitment quirks if the wrong variant is selected or fitted with old seals/hardware.
- Watch for symptoms such as unusual noises, early wear, or repeat failures after recent work, which can indicate mismatched parts or supporting items left worn.
- Always cross-check OEM part numbers, read model-year notes, and verify compatibility before ordering.
- For safety-critical components, confirm specification and fitment carefully and have installation checked by a competent technician.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, longer stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.
Brake Pad Wear Sensors — Brake pad wear sensors are replaced when pads are renewed or when warning lights indicate a broken or worn sensor. Symptoms include brake wear warnings even with new pads, damaged sensor cables, or broken clips around the caliper area.
Engine Electrical — Engine electrical parts are changed when there are starting, charging, ignition, or sensor-related faults that affect drivability and reliability, such as intermittent no-start, misfires, rough idle, poor charging, warning lights or heat-soak failures.
Service Parts — Service parts are replaced as routine maintenance to keep the engine and systems reliable, efficient, and protected, often resolving hard starting, rough idle, poor fuel economy and warning lights caused by clogged filters or worn ignition components.
Service Kits — Service kits bundle key service components to simplify maintenance and set the car back to a known baseline, especially useful when catching up on overdue servicing or dealing with general sluggish running, inconsistent idle and reduced performance.
- For brake parts, confirm whether items are OE-equivalent replacements or performance upgrades and check if new fitting kits and sensors are required.
- On service items and kits, match the kit to your exact Porsche model, engine and year, and review what is included so you can add any extra “while you are there” parts.
Explore OE Match at Design911
View the current OE Match range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
SET OF 2
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.1 Carrera 4 / 4S / 4 GTS 2012 - 2016
Porsche 991.1 Targa 4 GTS 2012 - 2016
* For cars with Standard chassis (option code: 029)
Diagram ref no 10
This spring set supports the full front axle load and manages suspension movement during braking, acceleration, and cornering. Replacing both front springs together ensures even load distribution, symmetrical ride height, and predictable handling characteristics.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Working together as a matched pair, they absorb road impacts, stabilise the vehicle body, and help maintain consistent tyre contact, steering accuracy, and ride comfort.
Coil springs weaken and sag over time due to constant load, mileage, and road conditions. Replacing only one spring can result in uneven ride height and compromised handling. Installing a pair restores correct suspension geometry, factory stance, and predictable driving dynamics.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353123504
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Sold individually – two springs are required per front axle.
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.1 Carrera 4 / 4S / 4 GTS 2012 - 2016
Porsche 991.1 Targa 4 GTS 2012 - 2016
* For cars with Standard chassis (option code: 029)
Diagram ref no 10
This coil spring supports one front corner of the vehicle, managing suspension compression and rebound during braking, acceleration, and cornering. It contributes to stable ride height, predictable handling, and balanced suspension response.
Installed between the lower control arm and the front strut assembly, the spring compresses and expands with suspension travel. It absorbs road impacts, controls body movement, and helps maintain proper tyre contact, steering accuracy, and ride comfort.
Over time, coil springs can weaken or sag due to constant load, mileage, and road conditions. A worn spring can alter ride height and suspension geometry, affecting handling, tyre wear, and comfort. Replacing tired springs with new components restores factory-style suspension balance and driving confidence.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353123504
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
Shop Securely
12 Month Warranty
Worldwide Delivery
SET OF 2.
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.1 Carrera 2 / 2S 2012 - 2016
Porsche 991.2 Carrera 2 / 2S 2016 - 2019
* for cars Electronic damper control for PASM and PDCC (option code: 352)
* for cars "PASM" electronic damper control (option code: 475)
* for cars PASM w/o lowering (option code: 477)
Diagram ref no 7
This spring set supports the full front axle load and controls suspension movement during braking, acceleration, and cornering. Replacing both front springs together ensures even load distribution, symmetrical ride height, and predictable handling characteristics.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Working together as a matched pair, they absorb road impacts, stabilise the vehicle body, and help maintain consistent tyre contact for confident steering response and ride comfort.
Coil springs weaken and sag over time due to constant load, mileage, and road conditions. Replacing only one spring can result in uneven ride height and compromised handling. Installing a pair restores correct suspension geometry, factory stance, and predictable driving dynamics
When to replace:
• Front ride height appears uneven or sagging
• Increased body roll or reduced handling precision
• Visible corrosion, cracks, or spring fatigue
• During front shock or strut replacement
• As part of a front suspension refresh
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353130504
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
Sold individually – two springs are required per front axle.
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.1 Carrera 2 / 2S 2012 - 2016
Porsche 991.2 Carrera 2 / 2S 2016 - 2019
* for cars Electronic damper control for PASM and PDCC (option code: 352)
* for cars "PASM" electronic damper control (option code: 475)
* for cars PASM w/o lowering (option code: 477)
Diagram ref no 7
This coil spring supports one front corner of the vehicle, managing suspension compression and rebound during braking, acceleration, and cornering. It helps maintain proper ride height and contributes to stable, predictable handling.
Installed between the lower control arm and the front strut assembly, the spring compresses and expands with suspension travel, absorbing road impacts and controlling body movement. Correct spring performance is essential for maintaining tyre contact, steering accuracy, and overall ride comfort.
Over time, coil springs can weaken or sag due to constant load, mileage, and road conditions. A worn spring can alter ride height and suspension geometry, affecting handling, tyre wear, and ride quality. Replacing tired springs restores factory-style suspension balance and driving confidence.
When to replace:
• Front ride height appears uneven or sagging
• Increased body roll or reduced handling precision
• Visible corrosion, cracks, or spring fatigue
• During front shock or strut replacement
• As part of a front suspension refresh
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353130504
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C2 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C2S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
Shop Securely
12 Month Warranty
Worldwide Delivery
SET OF 2
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.1 Carrera 4 / 4S 2012 - 2016
Porsche 991.1 Targa 4 / 4S 2012 - 2016
Porsche 991.2 Carrera 4 / 4S 2016 - 2019
Porsche 991.2 Targa 4 / 4S 2016 - 2019
* for cars Electronic damper control for PASM and PDCC (option code: 352)
* for cars "PASM" electronic damper control (option code: 475)
* for cars PASM w/o lowering (option code: 477)
Diagram ref no 7
This spring set supports the full front axle load and controls suspension movement during braking, acceleration, and cornering. Replacing both front springs together ensures even load distribution, symmetrical ride height, and predictable handling characteristics.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Working together as a matched pair, they absorb road impacts, stabilise the vehicle body, and help maintain consistent tyre contact for confident steering response and ride comfort.
Coil springs weaken and sag over time due to constant load, mileage, and road conditions. Replacing only one spring can result in uneven ride height and compromised handling. Installing a pair restores correct suspension geometry, factory stance, and predictable driving dynamics
When to replace:
• Front ride height appears uneven or sagging
• Increased body roll or reduced handling precision
• Visible corrosion, cracks, or spring fatigue
• During front shock or strut replacement
• As part of a front suspension refresh
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353131504
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
Sold individually – two springs are required per front axle.
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.1 Carrera 4 / 4S 2012 - 2016
Porsche 991.1 Targa 4 / 4S 2012 - 2016
Porsche 991.2 Carrera 4 / 4S 2016 - 2019
Porsche 991.2 Targa 4 / 4S 2016 - 2019
* for cars Electronic damper control for PASM and PDCC (option code: 352)
* for cars "PASM" electronic damper control (option code: 475)
* for cars PASM w/o lowering (option code: 477)
Diagram ref no 7
This coil spring supports one front corner of the vehicle, managing suspension compression and rebound during braking, acceleration, and cornering. It helps maintain proper ride height and contributes to stable, predictable handling.
Installed between the lower control arm and the front strut assembly, the spring compresses and expands with suspension travel, absorbing road impacts and controlling body movement. Correct spring performance is essential for maintaining tyre contact, steering accuracy, and overall ride comfort.
Over time, coil springs can weaken or sag due to constant load, mileage, and road conditions. A worn spring can alter ride height and suspension geometry, affecting handling and tyre wear. Replacing tired springs restores factory-style suspension balance and driving confidence.
When to replace:
• Front ride height appears uneven or sagging
• Increased body roll or reduced handling precision
• Visible corrosion, cracks, or spring fatigue
• During front shock or strut replacement
• As part of a front suspension refresh
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353131504
The product you are viewing cross references to these numbers
- Porsche 991.1 Carrera C4 3.4L (350 Bhp) 2012-16
- Porsche 991.1 Carrera C4S / GTS 3.8L (400/430 Bhp) 2012-16
- Porsche 991.2 Carrera 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 4S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Targa 4 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Targa 4S / GTS 3.0L (420/450 Bhp) 2016-19
Shop Securely
12 Month Warranty
Worldwide Delivery
Complete Water Pump Kit – Water Pump, Thermostat, Serpentine Belt & Gaskets for a Full Cooling System Refresh
This complete water pump kit includes a new water pump, thermostat, drive (serpentine) belt and the required gaskets for both the pump and thermostat housing.
Fits:
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
Designed as a comprehensive cooling system service package, it ensures correct coolant circulation, accurate temperature regulation, and reliable accessory belt operation. Ideal for preventative maintenance or full cooling system repair, this kit provides everything needed to restore confidence in your Porsche’s engine cooling performance.
The water pump continuously circulates coolant through the engine and radiators, while the thermostat regulates operating temperature and ensures the engine warms up properly. The serpentine belt drives essential accessories—including the water pump—so replacing all these components together ensures long-term reliability and prevents future breakdowns.
Kit Includes
Water pump and gasket
Thermostat
Thermostat housing gasket x 2
Inlet manifold gasket x 2
What This Complete Water Pump Kit Does
This cooling system service kit:
- Replaces the water pump to restore proper coolant flow
- Includes a new thermostat for accurate temperature control
- Supplies a fresh serpentine belt to ensure reliable accessory drive operation
- Comes with all required gaskets to prevent leaks during installation
- Improves cooling efficiency, reducing the risk of overheating
- Ensures long-term reliability with coordinated component replacement
- Perfect for workshop servicing, DIY maintenance or high-mileage cooling system refreshes.
Why Water Pumps, Thermostats & Belts Fail
Common failure points include:
- Bearing wear inside the water pump, causing leaks or noise
- Impeller degradation, reducing coolant flow
- Thermostat sticking, leading to overheating or overcooling
- Serpentine belt cracking, glazing or stretching
- Coolant contamination, accelerating component wear
- Heat cycling, which weakens gaskets and housings
Cooling failures can cause warped cylinder heads, engine misfires or complete engine failure if not addressed promptly.
Why These Components Should Be Replaced Together
Replacing the pump, thermostat and serpentine belt as a set ensures:
- Restored cooling performance across the entire system
- Correct belt tension and accessory drive function
- Reduced labour costs by avoiding repeat disassembly
- Balanced longevity, as all components age similarly
- Prevention of leaks, thanks to new gaskets and seals
- Peace of mind for daily driving, long trips or track use
This kit offers the most reliable and cost-effective approach to cooling system maintenance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.955.3.OEM
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne S 4.5L V8 2003-06
- Porsche 955 Cayenne Turbo 4.5L 2003-06
- Porsche 955 Cayenne Turbo S 4.5L 2006>>
Complete Water Pump Kit – Water Pump, Thermostat, Serpentine Belt & Gaskets for a Full Cooling System Refresh
This complete water pump kit includes a new water pump, thermostat, drive (serpentine) belt and the required gaskets for both the pump and thermostat housing.
Fits:
- Porsche 955 Cayenne 3.2L V6 2003-06
Designed as a comprehensive cooling system service package, it ensures correct coolant circulation, accurate temperature regulation, and reliable accessory belt operation. Ideal for preventative maintenance or full cooling system repair, this kit provides everything needed to restore confidence in your Porsche’s engine cooling performance.
The water pump continuously circulates coolant through the engine and radiators, while the thermostat regulates operating temperature and ensures the engine warms up properly. The serpentine belt drives essential accessories—including the water pump—so replacing all these components together ensures long-term reliability and prevents future breakdowns.
What This Complete Water Pump Kit Does
This cooling system service kit:
- Replaces the water pump to restore proper coolant flow
- Includes a new thermostat for accurate temperature control
- Supplies a fresh serpentine belt to ensure reliable accessory drive operation
- Comes with all required gaskets to prevent leaks during installation
- Improves cooling efficiency, reducing the risk of overheating
- Ensures long-term reliability with coordinated component replacement
- Perfect for workshop servicing, DIY maintenance or high-mileage cooling system refreshes.
Why Water Pumps, Thermostats & Belts Fail
Common failure points include:
- Bearing wear inside the water pump, causing leaks or noise
- Impeller degradation, reducing coolant flow
- Thermostat sticking, leading to overheating or overcooling
- Serpentine belt cracking, glazing or stretching
- Coolant contamination, accelerating component wear
- Heat cycling, which weakens gaskets and housings
Cooling failures can cause warped cylinder heads, engine misfires or complete engine failure if not addressed promptly.
Why These Components Should Be Replaced Together
Replacing the pump, thermostat and serpentine belt as a set ensures:
- Restored cooling performance across the entire system
- Correct belt tension and accessory drive function
- Reduced labour costs by avoiding repeat disassembly
- Balanced longevity, as all components age similarly
- Prevention of leaks, thanks to new gaskets and seals
- Peace of mind for daily driving, long trips or track use
This kit offers the most reliable and cost-effective approach to cooling system maintenance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.955.2.OEM
The product you are viewing cross references to these numbers
- Porsche 955 Cayenne 3.2L V6 2003-06
SET OF 2
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.2 Carrera 2 / 2S 10.12.2016 - 2019
* for cars with Sport suspension (option code: 030)
* for cars with Sport chassis with PASM and PDCC (option code: 031)
Diagram ref no 7
An OE-Match front coil spring set, supplied as two matched springs, designed to replicate the fit, function, and performance of the original Porsche sport suspension components.
This spring set supports the full front axle load and controls suspension movement during braking, acceleration, and cornering. Replacing both front springs together ensures even load distribution, symmetrical ride height, and predictable handling - especially important for sport-tuned suspension systems.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Working together as a matched pair, they absorb road impacts, stabilise the vehicle body, and help maintain precise steering response and tyre contact.
Sport suspension springs operate under higher loads and more aggressive driving conditions. Over time, they can weaken or sag, leading to uneven ride height and reduced handling precision. Installing a matched OE-Match pair restores correct suspension geometry, factory sport stance, and confident driving dynamics.
When to replace:
• Front ride height appears lower or uneven
• Noticeable increase in body roll or reduced handling precision
• Springs show corrosion, cracks, or fatigue
• During shock/strut replacement on M030/M031-equipped vehicles
• As part of a sports suspension refurbishment or alignment correction
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353132504
The product you are viewing cross references to these numbers
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
Sold individually – two springs are required per front axle.
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 991.2 Carrera 2 / 2S 10.12.2016 - 2019
* for cars with Sport suspension (option code: 030)
* for cars with Sport chassis with PASM and PDCC (option code: 031)
Diagram ref no 7
This coil spring supports one front corner of the vehicle and manages suspension compression and rebound during braking, acceleration, and cornering. Designed specifically for M030/M031 applications, it contributes to reduced body roll, improved handling response, and correct sport ride height.
Installed between the lower control arm and the front strut assembly, the spring compresses and expands with suspension travel, absorbing road impacts while controlling body movement. Proper spring performance is essential for maintaining correct suspension geometry, steering precision, and predictable handling on sport-tuned vehicles.
Sport suspension springs operate under higher loads and more aggressive driving conditions. Over time, they can weaken or sag, leading to uneven ride height and reduced handling precision. Replacing worn springs with new components restores correct suspension stance and performance.
When to replace:
• Front ride height appears lower or uneven
• Noticeable increase in body roll or reduced handling precision
• Springs show corrosion, cracks, or fatigue
• During shock/strut replacement on M030/M031-equipped vehicles
• As part of a sports suspension refurbishment or alignment correction
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99134353132504
The product you are viewing cross references to these numbers
- Porsche 991.2 Carrera 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Carrera 2S / GTS 3.0L (420/450 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2 3.0L (370 Bhp) 2016-19
- Porsche 991.2 Cabriolet 2S / GTS 3.0L (420/450 Bhp) 2016-19
Shop Securely
12 Month Warranty
Worldwide Delivery
SET OF 2
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 992.1 (911) Carrera 2 / 2S / GTS 2019 - 2024
Porsche 992.2 (911) Carrera 2 / GTS 2024 >>
* For cars with and without adaptive suspension
* For cars with Comfort equipment (option code: A8C)
* For cars with Sports equipment (option code: A8F)
* For cars with Suspension/shock absorption, Standard 2 (option code: 1BH)
Diagram ref no 5
This spring set supports the full front axle load and controls suspension movement during braking, acceleration, and cornering. Replacing both front springs together ensures even load distribution, symmetrical ride height, and predictable handling characteristics.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Working as a matched pair, they absorb road impacts, stabilise the vehicle body, and help maintain consistent tyre contact for confident steering response and ride comfort.
Coil springs weaken and sag over time due to constant load, mileage, and road conditions. Replacing only one spring can result in uneven ride height and compromised handling. Installing a pair ensures balanced suspension geometry, restored factory stance, and predictable driving dynamics.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992411105504
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
Sold individually – two springs are required per front axle.
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 992.1 (911) Carrera 2 / 2S / GTS 2019 - 2024
Porsche 992.2 (911) Carrera 2 / GTS 2024 >>
* For cars with and without adaptive suspension
* For cars with Comfort equipment (option code: A8C)
* For cars with Sports equipment (option code: A8F)
* For cars with Suspension/shock absorption, Standard 2 (option code: 1BH)
Diagram ref no 5
This coil spring supports the vehicle’s front suspension by managing compression and rebound during braking, acceleration, and cornering. It helps maintain proper ride height and contributes to predictable handling and driving stability.
Installed between the lower control arm and the front strut assembly, the spring compresses and expands with suspension movement, absorbing road impacts and controlling body motion. Correct spring performance is essential for maintaining tire contact, steering accuracy, and overall ride comfort.
Over time, coil springs can weaken or sag due to constant load, mileage, and road conditions. A worn spring can alter ride height and suspension geometry, affecting handling and tire wear. Replacing tired springs with new components restores factory-style suspension balance and driving confidence.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992411105504
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L Cabriolet 2024>>
Shop Securely
12 Month Warranty
Worldwide Delivery
SET OF 2,
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 992.1 (911) Carrera 4 / 4S / GTS 2019 - 2024
Porsche 992.1 (911) Targa 4 / 4S / GTS 2019 - 2024
Porsche 992.2 (911) Carrera 4 GTS 2024 >>
Porsche 992.2 (911) Targa 4 GTS 2024 >>
* For cars with and without adaptive suspension
* For cars with Comfort equipment (option code: A8C)
* For cars with Sports equipment (option code: A8F)
* For cars with Suspension/shock absorption, Standard 2 (option code: 1BH)
Diagram ref no 5
This spring set supports the full front axle load and controls suspension movement during braking, acceleration, and cornering. Replacing both front springs together ensures even load distribution, symmetrical ride height, and predictable handling characteristics.
Installed between the lower control arm and the front strut assembly, the spring compresses and expands with suspension travel, absorbing road impacts and controlling body movement. Proper spring function is essential for maintaining tire contact, steering precision, and overall ride quality.
Over time, coil springs can weaken or sag due to constant load, mileage, and road impacts. Replacing a worn spring restores proper ride height and suspension geometry, helping prevent uneven handling, premature tire wear, and reduced driving confidence.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992411105A504
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
Sold individually – two springs are required per front axle.
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 992.1 (911) Carrera 4 / 4S / GTS 2019 - 2024
Porsche 992.1 (911) Targa 4 / 4S / GTS 2019 - 2024
Porsche 992.2 (911) Carrera 4 GTS 2024 >>
Porsche 992.2 (911) Targa 4 GTS 2024 >>
* For cars with and without adaptive suspension
* For cars with Comfort equipment (option code: A8C)
* For cars with Sports equipment (option code: A8F)
* For cars with Suspension/shock absorption, Standard 2 (option code: 1BH)
Diagram ref no 5
This coil spring supports the front corner of the vehicle, managing suspension compression and rebound during braking, acceleration, and cornering. It helps maintain correct ride height and contributes to stable, predictable handling.
Installed between the lower control arm and the front strut assembly, the spring compresses and expands with suspension travel, absorbing road impacts and controlling body movement. Proper spring function is essential for maintaining tire contact, steering precision, and overall ride quality.
Over time, coil springs can weaken or sag due to constant load, mileage, and road impacts. Replacing a worn spring restores proper ride height and suspension geometry, helping prevent uneven handling, premature tire wear, and reduced driving confidence.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992411105A504
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L Cabriolet 2024>>
- Porsche 992.2 Targa 4 GTS 3.6L 2024>>
Shop Securely
12 Month Warranty
Worldwide Delivery
SET OF 2,
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 992.1 (911) Carrera 2 / 2S / GTS 2019 - 2024
Porsche 992.1 (911) Carrera 4 / 4S / GTS 2019 - 2024
Porsche 992.1 (911) Targa 4 / 4S / GTS 2019 - 2024
* For 'Special edition' models (option code: E0W)
* For cars with and without adaptive suspension
* For cars with Sports suspension (option code: 1BV)
Diagram ref no 5
This spring set supports the full front axle load and manages suspension movement during braking, acceleration, and cornering. Replacing both front springs together ensures even load distribution, symmetrical ride height, and predictable handling characteristics.
Installed between the lower control arms and front strut assemblies, the coil springs compress and rebound with suspension travel. Working as a matched pair, they absorb road impacts, stabilize the vehicle body, and help maintain optimal tire contact for confident steering response and ride comfort.
Over time, coil springs can weaken or sag due to constant load, mileage, and road conditions. Replacing only one spring can result in uneven ride height and compromised handling. Installing a pair ensures balanced suspension geometry, consistent performance, and a restored factory stance - essential for maintaining the driving dynamics.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992411105AD504
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
Sold individually – two springs are required per front axle.
We strongly recommend replacing coil springs in pairs.
Fits:
Porsche 992.1 (911) Carrera 2 / 2S / GTS 2019 - 2024
Porsche 992.1 (911) Carrera 4 / 4S / GTS 2019 - 2024
Porsche 992.1 (911) Targa 4 / 4S / GTS 2019 - 2024
* For 'Special edition' models (option code: E0W)
* For cars with and without adaptive suspension
* For cars with Sports suspension (option code: 1BV)
Diagram ref no 5
This coil spring supports the front corner of the vehicle, managing suspension compression and rebound during braking, acceleration, and cornering. It helps maintain correct ride height and contributes to stable, predictable handling.
Installed between the lower control arm and the front strut assembly, the spring compresses and expands with suspension travel, absorbing road impacts and controlling body movement. Correct spring performance is essential for maintaining tire contact, steering precision, and overall ride quality.
Over time, coil springs can weaken or sag due to constant load and road impacts, leading to uneven ride height, compromised handling, and altered suspension geometry. Replacing worn springs restores suspension balance and helps preserve the driving dynamics.
Replace this part if you experience any of the following:
• Uneven or sagging front ride height
• Excessive body roll or unstable handling
• Cracks, corrosion, or visible spring fatigue
• Suspension overhaul, shock absorber replacement, or alignment work
• After significant mileage or heavy track/road use
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992411105AD504
The product you are viewing cross references to these numbers
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
Shop Securely
12 Month Warranty
Worldwide Delivery
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed