Please wait… 
Please wait while we process your order,
do not press the back button…
do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Part Categories +
- Accessories
- Brakes
- Chassis / Bodywork
- Clothing & Gifts
- Electrical & Relays
- Engine Cooling
- Engine Electrical
- Engine Rebuild Parts
- Engine Tuning
- Exhausts
- Exterior Styling / Spoilers
- Gearbox / Transmission
- Heating / Air Conditioning
- Hydraulics
- Incar / Multimedia
- Interior & Accessories
- Lighting
- Mats & Carpets
- Motorsport and Off-Road
- Parts for Other Cars
- Pedal Cluster
- Rubber Seals
- Seats & Seat Belts
- Service Parts
- Special Offer Parts
- Steering Parts
- Suspension & Axle
- Suspension Upgrades
- Tyres
- Wheel Accessories
- Wheels
OE Match
About OE Match
OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.
OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations.
90133105900HD/KIT
Product Information
A rubber-bonded bushing pressed into the upper mount of the rear trailing arm. It isolates noise/vibration and fixes the trailing arm’s pivot geometry so toe/camber stay stable under load. Porsche lists it for 1965–89 911/912 (also 912E and 930). Four are used per car.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133105900HD
The product you are viewing cross references to these numbers
Product Information
Trailing arm bushing, Heavy Duty. SET OF 4 Note: Club Sport version; 30% stiffer than OE part.A rubber-bonded bushing pressed into the upper mount of the rear trailing arm. It isolates noise/vibration and fixes the trailing arm’s pivot geometry so toe/camber stay stable under load. Porsche lists it for 1965–89 911/912 (also 912E and 930). Four are used per car.
Fits:
Porsche 911/912/930 1965-89
Diagram Ref No 3
• Club Sport version
• 30% stiffer than OE part
• Guaranteed fitment
• OE trailing arm bushing dimensions for correct alignment and smooth ride
• Restores proper suspension handling and braking stability
• High-quality heat-resistant elastomer and metal materials for maximum durability
• 24 Month Unlimited Mileage Warranty
Mount Hole Quantity: 1
Inside Diameter: 14.12 MM
Outside Diameter: 46 MM
Mount Hole Diameter: 34.4 MM
Material: Steal
Colour: Gold
Why replace them and typical age-related failures: Cracked or perished rubber → rear-end clunks, squeaks, and “rear-steer” feel on throttle/brake. Ovalised inner sleeve → unstable alignment; car wanders and tramlines. Oil/heat-swollen rubber → excess compliance and braking instability. Replacing restores correct alignment, handling and braking stability
Common issues you’ll see Play at the trailing-arm pivot (visible with a pry bar); torn rubber. Uneven rear-tyre wear (inside edges from toe change under load). Noisy rear suspension over small bumps. Alignment won’t hold after a set-up (bushings deflect back).
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133105900HD
90133105900
90133105900HD
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
4 x Trailing arm bushing, Heavy Duty. Porsche 911/912 (90133105900HD)
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€128.72 inc. VAT
Now €115.84 inc. VAT
In Stock - 24 Hour Dispatch
90133105900/1KIT
Product Information
A rubber-bonded bushing pressed into the upper mount of the rear trailing arm. It isolates noise/vibration and fixes the trailing arm’s pivot geometry so toe/camber stay stable under load. Porsche lists it for 1965–89 911/912 (also 912E and 930). Four are used per car.
Fits:
Porsche 911/912/930 1965-89
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133105900
The product you are viewing cross references to these numbers
Product Information
Trailing arm top silencer block. SET OF 4A rubber-bonded bushing pressed into the upper mount of the rear trailing arm. It isolates noise/vibration and fixes the trailing arm’s pivot geometry so toe/camber stay stable under load. Porsche lists it for 1965–89 911/912 (also 912E and 930). Four are used per car.
Fits:
Porsche 911/912/930 1965-89
Why replace them and typical age-related failures: Cracked or perished rubber → rear-end clunks, squeaks, and “rear-steer” feel on throttle/brake. Ovalised inner sleeve → unstable alignment; car wanders and tramlines. Oil/heat-swollen rubber → excess compliance and braking instability. Replacing restores correct alignment, handling and braking stability
Common issues you’ll see
Play at the trailing-arm pivot (visible with a pry bar); torn rubber.
Uneven rear-tyre wear (inside edges from toe change under load).
Noisy rear suspension over small bumps.
Alignment won’t hold after a set-up (bushings deflect back).
Click 'Zoom in' for large parts diagram.
Diagram Ref No 3
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
90133105900
90133105900
90133105900HD
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
4 x Trailing arm top silencer block. Sold each. Porsche 911/912 (90133105900/1)
Vehicle Group
Vehicle Group
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
€105.32 inc. VAT
Now €94.80 inc. VAT
In Stock - 24 Hour Dispatch
95534304X50/1KIT
Product Information
The OE Match Front Shock Absorber Kit includes both left and right shock absorbers, providing a complete front suspension replacement for compatible Porsche Cayenne 957 models. Each shock absorber is designed to replicate the performance of the original Porsche shock absorber, offering the same damping characteristics, mounting geometry and durability as the factory shock absorbers.
SET OF 2, Left and Right.
Fits:
Porsche 957 Cayenne (9PA1) 3.6L 2007 - 2010
Porsche 957 Cayenne S / GTS (9PA1) 4.8L 2007 - 2010
Porsche 957 Cayenne Turbo / Turbo S (9PA1) 4.8L 2007 - 2010
Cars With Option Codes:
1BW - Comfort Suspension/Damping (Steel Springs)
Diagram Ref No 15
By replacing both front dampers together, the set restores balanced suspension behaviour, consistent handling, and a smoother, more controlled ride. This is essential on vehicles where matched damping forces across the front axle are needed for proper steering response and stability.
This shock absorber smooths out bumps, potholes, and road imperfections to provide a more controlled and comfortable ride. It helps keep the front suspension stable during braking, cornering, and acceleration, supporting predictable steering and confident road-holding. By reducing unwanted oscillation, rebound, and vibration, it prevents instability and restores proper suspension performance when the original damper has become worn or ineffective.
Over time, shock absorbers lose their effectiveness through internal wear, fluid leaks, or weakened valving, which leads to a harsher ride and reduced suspension control. A worn damper allows excessive movement, causing instability, longer braking distances, and uneven tyre wear. Replacing it with a fresh OE-match unit restores proper damping, improves handling confidence, and helps maintain overall driving safety and comfort.
You should fit a new shock absorber if:
• The ride has become bouncy, unsettled or harsh over uneven surfaces
• Handling feels loose or unstable, especially at speed or under load
• The vehicle exhibits uneven tyre wear, or suspension components show stress
• Shock absorber shows leaks, damage or reduced damping performance
• You are refreshing or upgrading the suspension for improved comfort or safety
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534304X50
The product you are viewing cross references to these numbers
Product Information
Front shock absorbers (PAIR)The OE Match Front Shock Absorber Kit includes both left and right shock absorbers, providing a complete front suspension replacement for compatible Porsche Cayenne 957 models. Each shock absorber is designed to replicate the performance of the original Porsche shock absorber, offering the same damping characteristics, mounting geometry and durability as the factory shock absorbers.
SET OF 2, Left and Right.
Fits:
Porsche 957 Cayenne (9PA1) 3.6L 2007 - 2010
Porsche 957 Cayenne S / GTS (9PA1) 4.8L 2007 - 2010
Porsche 957 Cayenne Turbo / Turbo S (9PA1) 4.8L 2007 - 2010
Cars With Option Codes:
1BW - Comfort Suspension/Damping (Steel Springs)
Diagram Ref No 15
By replacing both front dampers together, the set restores balanced suspension behaviour, consistent handling, and a smoother, more controlled ride. This is essential on vehicles where matched damping forces across the front axle are needed for proper steering response and stability.
This shock absorber smooths out bumps, potholes, and road imperfections to provide a more controlled and comfortable ride. It helps keep the front suspension stable during braking, cornering, and acceleration, supporting predictable steering and confident road-holding. By reducing unwanted oscillation, rebound, and vibration, it prevents instability and restores proper suspension performance when the original damper has become worn or ineffective.
Over time, shock absorbers lose their effectiveness through internal wear, fluid leaks, or weakened valving, which leads to a harsher ride and reduced suspension control. A worn damper allows excessive movement, causing instability, longer braking distances, and uneven tyre wear. Replacing it with a fresh OE-match unit restores proper damping, improves handling confidence, and helps maintain overall driving safety and comfort.
You should fit a new shock absorber if:
• The ride has become bouncy, unsettled or harsh over uneven surfaces
• Handling feels loose or unstable, especially at speed or under load
• The vehicle exhibits uneven tyre wear, or suspension components show stress
• Shock absorber shows leaks, damage or reduced damping performance
• You are refreshing or upgrading the suspension for improved comfort or safety
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
95534304X50
95534304350
95534304450
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Shock Absorber, Front. Porsche 9PA1 Cayenne (957) 3.6L / 4.8L 2007-10 (95534304350/1)
1 x Shock Absorber, Front. Porsche 9PA1 Cayenne (957) 3.6L / 4.8L 2007-10 (95534304450/1)
Vehicle Group
Vehicle Group
- Porsche 957 Cayenne 3.6L 2007-10
- Porsche 957 Cayenne S/GTS 4.8L 2007-10
- Porsche 957 Cayenne Turbo / Turbo S 4.8L 2007-10
€617.76 inc. VAT
Now €555.98 inc. VAT
In Stock - 24 Hour Dispatch
99734304X41/1KIT
Product Information
These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.
Kit includes:
1 × 99734304741 - OE Match Front Left PASM Shock
1 × 99734304841 - OE Match Front Right PASM Shock
Fits:
Replacement for Car with PASM Electronic Damper Control (option code: 475)
Porsche 997.1 Carrera 4 / Carrera 4S 2005 - 2008 Coupe / Cabrio
Porsche 997.2 Carrera 4 / Carrera 4S 2009 - 2012 Coupe / Cabrio
Diagram ref no 1
Over time, PASM front shock absorbers lose their damping accuracy, which affects both comfort and handling. Worn dampers can cause inconsistent ride quality, reduced steering precision and poor stability over bumps or under braking. Replacing them restores full PASM functionality, ensuring the suspension reacts correctly in all modes and returns the 911’s signature balanced, confident road feel.
When to Replace:
• PASM fault messages appear
• Leaking hydraulic fluid from either damper
• Front suspension feels harsh, bouncy or unstable
• Noticeable decline in steering precision
• Completing a suspension refresh for optimal handling
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99734304X41
The product you are viewing cross references to these numbers
Product Information
Shock Absorber Front, SET OF 2 (Left and right).These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.
Kit includes:
1 × 99734304741 - OE Match Front Left PASM Shock
1 × 99734304841 - OE Match Front Right PASM Shock
Fits:
Replacement for Car with PASM Electronic Damper Control (option code: 475)
Porsche 997.1 Carrera 4 / Carrera 4S 2005 - 2008 Coupe / Cabrio
Porsche 997.2 Carrera 4 / Carrera 4S 2009 - 2012 Coupe / Cabrio
- These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
- They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
- For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers)
- Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.
Diagram ref no 1
Over time, PASM front shock absorbers lose their damping accuracy, which affects both comfort and handling. Worn dampers can cause inconsistent ride quality, reduced steering precision and poor stability over bumps or under braking. Replacing them restores full PASM functionality, ensuring the suspension reacts correctly in all modes and returns the 911’s signature balanced, confident road feel.
When to Replace:
• PASM fault messages appear
• Leaking hydraulic fluid from either damper
• Front suspension feels harsh, bouncy or unstable
• Noticeable decline in steering precision
• Completing a suspension refresh for optimal handling
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99734304X41
99734304715
99734304815
99734304708
99734304824
99734304710
99734304714
99734304814
99734304822
99734304722
99734304724
99734304726
22-147561
99734304826
22-147554
99734304808
99734304810
99734304841
99734304741
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Shock Absorber, Front. Porsche 997.1 / 997.2 C4 / C4S With PASM 2005-12 (99734304741/1)
1 x Shock Absorber, Front. Porsche 997.1 / 997.2 C4 / C4S With PASM 2005-12 (99734304841/1)
Vehicle Group
Vehicle Group
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
€526.50 inc. VAT
Now €473.84 inc. VAT
In Stock - 24 Hour Dispatch
99634398009/2KIT
Product Information
This is for the shock absorber as an additional spring, also known as a bump stop, stopper or helper spring, designed for the front strut assemblies on Porsche 997 models equipped with the Sport chassis (option codes I030 or I480). Front axle suspension assembly for Porsche 996/997 (1998–2012), serving as a rubber stop or bushing integrated into the strut structure.
Fits:
Porsche 997 C2 / C2S / C4 / C4S MKI 2005-08 - Cars with SPORT chassis (Option code: I030/I480)
Porsche 997 C2 / C2S / C4 / C4S MKII 2009-12 - Cars with SPORT chassis (Option code: I030)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99634398009
The product you are viewing cross references to these numbers
Product Information
Shock absorber additional springs. SET OF 2. fits the FRONT Cars with SPORT chassis (Option code: I030/I480) one additional spring is required for each shock absorber, this is a set of 2 This is for the shock absorber as an additional spring, also known as a bump stop, stopper or helper spring, designed for the front strut assemblies on Porsche 997 models equipped with the Sport chassis (option codes I030 or I480). Front axle suspension assembly for Porsche 996/997 (1998–2012), serving as a rubber stop or bushing integrated into the strut structure.
Fits:
Porsche 997 C2 / C2S / C4 / C4S MKI 2005-08 - Cars with SPORT chassis (Option code: I030/I480)
Porsche 997 C2 / C2S / C4 / C4S MKII 2009-12 - Cars with SPORT chassis (Option code: I030)
This acts as a progressive load-bearing element, cushioning the suspension when the strut nears full compression. It helps prevent harsh bottoming-out, protecting both the strut and chassis from damage during aggressive driving or over bumps.
These components maintain ride quality and handling performance, especially under heavy loading or spirited cornering, keeping the suspension linear and controlled.
Common Issues & Considerations
Wear or Deterioration: Over time, the rubber can compress, crack, or lose elasticity, diminishing its effectiveness. This can lead to harsher suspension impacts at full compression.
Noise or Harsh Feedback: A worn or hardened bump stop can transmit noise or impacts through the cabin, particularly over rough roads or speed bumps.
Sport vs. Standard Suspension: These parts are specific to Sport chassis models. Non-sport setups may not have the same bump stops or use different part numbers, so swapping or replacing must be done accordingly.
Click 'Zoom in' for large parts diagram.
Diagram ref no 9
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99634398009
99634398009
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Shock Absorber Additional Spring. Porsche 997 MKI and MKII (99634398009/2)
Vehicle Group
Vehicle Group
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
€40.96 inc. VAT
Now €36.86 inc. VAT
In Stock - 24 Hour Dispatch
99634398009/2
Product Information
This is for the shock absorber as an additional spring, also known as a bump stop, stopper or helper spring, designed for the front strut assemblies on Porsche 997 models equipped with the Sport chassis (option codes I030 or I480). Front axle suspension assembly for Porsche 996/997 (1998–2012), serving as a rubber stop or bushing integrated into the strut structure.
Fits:
Porsche 997 C2 / C2S / C4 / C4S MKI 2005-08 - Cars with SPORT chassis (Option code: I030/I480)
Porsche 997 C2 / C2S / C4 / C4S MKII 2009-12 - Cars with SPORT chassis (Option code: I030)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99634398009
The product you are viewing cross references to these numbers
Product Information
Shock absorber additional spring. fits the FRONT Cars with SPORT chassis (Option code: I030/I480) one additional spring is required for each shock absorber, the price is each. This is for the shock absorber as an additional spring, also known as a bump stop, stopper or helper spring, designed for the front strut assemblies on Porsche 997 models equipped with the Sport chassis (option codes I030 or I480). Front axle suspension assembly for Porsche 996/997 (1998–2012), serving as a rubber stop or bushing integrated into the strut structure.
Fits:
Porsche 997 C2 / C2S / C4 / C4S MKI 2005-08 - Cars with SPORT chassis (Option code: I030/I480)
Porsche 997 C2 / C2S / C4 / C4S MKII 2009-12 - Cars with SPORT chassis (Option code: I030)
This acts as a progressive load-bearing element, cushioning the suspension when the strut nears full compression. It helps prevent harsh bottoming-out, protecting both the strut and chassis from damage during aggressive driving or over bumps.
These components maintain ride quality and handling performance, especially under heavy loading or spirited cornering, keeping the suspension linear and controlled.
Common Issues & Considerations
Wear or Deterioration: Over time, the rubber can compress, crack, or lose elasticity, diminishing its effectiveness. This can lead to harsher suspension impacts at full compression.
Noise or Harsh Feedback: A worn or hardened bump stop can transmit noise or impacts through the cabin, particularly over rough roads or speed bumps.
Sport vs. Standard Suspension: These parts are specific to Sport chassis models. Non-sport setups may not have the same bump stops or use different part numbers, so swapping or replacing must be done accordingly.
Click 'Zoom in' for large parts diagram.
Diagram ref no 9
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99634398009
99634398009
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche 997 MKII Carrera C4 3.6L 2009-12
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
- Porsche 997 MKII Carrera C4S 3.8L 2009-12
€20.48 inc. VAT
Now €18.43 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
982513031F/1KIT
Product Information
A pair of rear suspension shock absorbers engineered to the same specifications as the original equipment parts. Designed for direct bolt-on installation, each shock fits the left and right rear suspension of the 982 (718) Boxster and Cayman models equipped with Sports suspension (M030).
SET OF 2, Left and right shock absorber.
Fits:
For cars with Sports Suspension (option codes: 030)
Porsche 982 Boxster (718) 2017>>
Porsche 982 Cayman (718) 2017>>
Diagram Ref No 1
This OE Match shock absorber set delivers factory-equivalent ride control and stability. Manufactured to meet OEM performance standards, these shocks provide precise damping response, dependable rebound control, and durable operation under both everyday driving and spirited use.
Replacing rear shocks as a pair ensures symmetrical damping on both sides, restoring correct chassis balance, rear-end stability, and consistent handling feel.
These rear dampers absorb road impacts and vibrations to provide a smoother, more controlled ride. They regulate both compression and rebound forces, helping the suspension respond predictably under all driving conditions. By maintaining proper alignment and reducing stress on surrounding components, they preserve the balanced, sporty ride quality expected from the 718 series.
Worn or weakened rear shocks can lead to:
• Reduced stability and grip
• Excessive bouncing over bumps
• Uneven or unpredictable handling
• Longer braking distances
• Accelerated tyre and suspension wear
Installing a pair restores proper damping performance, improves driving confidence, and preserves the balanced road feel.
Replace your rear shocks if you notice:
• Leaking fluid around the dampers
• Excessive bounce or instability at the rear
• Degraded ride comfort or harshness
• Uneven tyre wear or poor cornering response
• Suspension upgrades, repairs, or mileage-related wear (typically 50k–70k miles+)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982513031F
The product you are viewing cross references to these numbers
Product Information
Rear shock absorbers for cars with Sports Suspension M030). A pair of rear suspension shock absorbers engineered to the same specifications as the original equipment parts. Designed for direct bolt-on installation, each shock fits the left and right rear suspension of the 982 (718) Boxster and Cayman models equipped with Sports suspension (M030).
SET OF 2, Left and right shock absorber.
Fits:
For cars with Sports Suspension (option codes: 030)
Porsche 982 Boxster (718) 2017>>
Porsche 982 Cayman (718) 2017>>
Diagram Ref No 1
This OE Match shock absorber set delivers factory-equivalent ride control and stability. Manufactured to meet OEM performance standards, these shocks provide precise damping response, dependable rebound control, and durable operation under both everyday driving and spirited use.
Replacing rear shocks as a pair ensures symmetrical damping on both sides, restoring correct chassis balance, rear-end stability, and consistent handling feel.
These rear dampers absorb road impacts and vibrations to provide a smoother, more controlled ride. They regulate both compression and rebound forces, helping the suspension respond predictably under all driving conditions. By maintaining proper alignment and reducing stress on surrounding components, they preserve the balanced, sporty ride quality expected from the 718 series.
Worn or weakened rear shocks can lead to:
• Reduced stability and grip
• Excessive bouncing over bumps
• Uneven or unpredictable handling
• Longer braking distances
• Accelerated tyre and suspension wear
Installing a pair restores proper damping performance, improves driving confidence, and preserves the balanced road feel.
Replace your rear shocks if you notice:
• Leaking fluid around the dampers
• Excessive bounce or instability at the rear
• Degraded ride comfort or harshness
• Uneven tyre wear or poor cornering response
• Suspension upgrades, repairs, or mileage-related wear (typically 50k–70k miles+)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982513031F
982513031F
982513031A
982513031D
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Shock Absorber, Rear. Porsche 982 Boxster / Cayman (718) 2017>> (982513031F/1)
Vehicle Group
Vehicle Group
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Price: €519.48 inc. VAT
Due In 30+ Days
982513031F/1
Product Information
The rear suspension strut/shock absorber mounts between the rear frame and the rear suspension on 982 (718) Boxster/Cayman models equipped with the sport suspension (option code: 030). It controls the damping and rebound of the rear suspension, absorbing road imperfections and maintaining tire contact with the ground, providing stability, comfort, and handling.
Sold each, Fits left and right side
Fits:
For cars with Sports Suspension (option codes: 030)
Porsche 982 Boxster (718) 2017>>
Porsche 982C Cayman (718C) 2017>>
Diagram ref no 1
This shock absorber regulates the suspension’s movement by absorbing and damping motion as the rear wheels react to road surfaces, bumps or dynamic forces. It ensures the rear end remains stable and controlled during acceleration, braking, cornering, or over uneven surfaces. By restoring proper damping performance, it helps maintain ride comfort, correct suspension geometry, and sharp handling characteristics that Porsche intended.
Shock absorbers degrade over time through wear, leaking seals, and internal fatigue. When rear dampers lose effectiveness, the suspension becomes uncontrolled: leading to poor ride comfort, excessive bouncing over bumps, reduced traction, worsened handling, and increased strain on tyres and suspension components. Replacing with a new damper restores proper damping performance - ensuring ride comfort, handling precision, stability, and safety. This is particularly important for a sports car like the 982 Boxster / Cayman, where chassis balance and dynamic response are critical to the driving experience.
When to replace
• You should consider replacing the rear shock absorbers if you notice any of the following:
• Bouncing or excessive vertical motion over bumps.
• Reduced stability under braking, cornering or on uneven roads.
• Unusual “floating” ride, lack of suspension control, or degraded handling feel.
• Fluid leaks from the old dampers or visibly worn / damaged units.
• You are performing suspension overhaul, upgrading ride quality, or restoring front/rear suspension on the car.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982513031F
The product you are viewing cross references to these numbers
Product Information
Rear shock absorber for cars with Sports Suspension (M030).The rear suspension strut/shock absorber mounts between the rear frame and the rear suspension on 982 (718) Boxster/Cayman models equipped with the sport suspension (option code: 030). It controls the damping and rebound of the rear suspension, absorbing road imperfections and maintaining tire contact with the ground, providing stability, comfort, and handling.
Sold each, Fits left and right side
Fits:
For cars with Sports Suspension (option codes: 030)
Porsche 982 Boxster (718) 2017>>
Porsche 982C Cayman (718C) 2017>>
Diagram ref no 1
This shock absorber regulates the suspension’s movement by absorbing and damping motion as the rear wheels react to road surfaces, bumps or dynamic forces. It ensures the rear end remains stable and controlled during acceleration, braking, cornering, or over uneven surfaces. By restoring proper damping performance, it helps maintain ride comfort, correct suspension geometry, and sharp handling characteristics that Porsche intended.
Shock absorbers degrade over time through wear, leaking seals, and internal fatigue. When rear dampers lose effectiveness, the suspension becomes uncontrolled: leading to poor ride comfort, excessive bouncing over bumps, reduced traction, worsened handling, and increased strain on tyres and suspension components. Replacing with a new damper restores proper damping performance - ensuring ride comfort, handling precision, stability, and safety. This is particularly important for a sports car like the 982 Boxster / Cayman, where chassis balance and dynamic response are critical to the driving experience.
When to replace
• You should consider replacing the rear shock absorbers if you notice any of the following:
• Bouncing or excessive vertical motion over bumps.
• Reduced stability under braking, cornering or on uneven roads.
• Unusual “floating” ride, lack of suspension control, or degraded handling feel.
• Fluid leaks from the old dampers or visibly worn / damaged units.
• You are performing suspension overhaul, upgrading ride quality, or restoring front/rear suspension on the car.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982513031F
982513031F
982513031A
982513031D
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Boxster GTS 718 4.0L Manual (400 Bhp)
- Porsche Boxster GTS 718 4.0L PDK (400 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman GTS 718 4.0L Manual (400 Bhp)
- Porsche Cayman GTS 718 4.0L PDK (400 Bhp)
Price: €259.74 inc. VAT
Due In 30+ Days
Shop Securely
12 Month Warranty
Worldwide Delivery
992413031AD/1KIT
Product Information
For Cars With Standard And Controlled Suspension System. - Left And Right.
Porsche 992.1 Carrera MKI 2019>>2024 (Without Option Code: -E0W)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992413031AD
The product you are viewing cross references to these numbers
Product Information
Suspension Shock Absorbers Damper Strut (PAIR), Front. Without Option Code: -E0WFor Cars With Standard And Controlled Suspension System. - Left And Right.
These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.
Fits:Porsche 992.1 Carrera MKI 2019>>2024 (Without Option Code: -E0W)
Porsche 992.2 Carrera MKII 2024 >>
Diagram Ref No 1
- These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
- They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
- For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers)
- Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992413031AD
992413031E
992413031D
992413031AD
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Suspension Shock Absorber Damper Strut, Front. Porsche 992.1 / 992.2 Carrera 2019-24 (992413031AD/1)
Vehicle Group
Vehicle Group
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
€659.88 inc. VAT
Now €593.90 inc. VAT
Orderable - 30 to 60 Days
992413031AD/1
Product Information
For Cars With Standard And Controlled Suspension System - Sold Each, Fits Left And Right.
Fits:
Porsche 992.1 Carrera MKI 2019>>2024 (Without Option Code: -E0W)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992413031AD
The product you are viewing cross references to these numbers
Product Information
Suspension Shock Absorber Damper Strut, Front. Without Option Code: -E0WFor Cars With Standard And Controlled Suspension System - Sold Each, Fits Left And Right.
These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.
Fits:
Porsche 992.1 Carrera MKI 2019>>2024 (Without Option Code: -E0W)
Porsche 992.2 Carrera MKII 2024 >>
Diagram Ref No 1
- These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
- They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
- For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers)
- Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
992413031AD
992413031E
992413031D
992413031AD
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 992.1 Carrera 2 3.0L 2019-24
- Porsche 992.1 Carrera 4 3.0L 2019-24
- Porsche 992.1 Carrera 2 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4 Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS 3.0L 2019-24
- Porsche 992.1 Carrera 2S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Carrera 4S / GTS Cabriolet 3.0L 2019-24
- Porsche 992.1 Targa 4 3.0L 2020-24
- Porsche 992.1 Targa 4S / GTS 3.0L 2020-24
- Porsche 992.2 Carrera 2 3.0L 2024>>
- Porsche 992.2 Carrera 2 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 4 GTS 3.6L 2024>>
- Porsche 992.2 Carrera 2 3.0L Cabriolet 2024>>
€329.94 inc. VAT
Now €296.95 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
982513029H/1KIT
Product Information
Left And Right.
Fits:
Porsche 982 Cayman (718) 2017>>
Cars With Option Codes:
029 - Standard Chassis
Diagram Ref No 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982513029H
The product you are viewing cross references to these numbers
Product Information
Shock Absorbers (PAIR), Rear.Left And Right.
Fits:
Porsche 982 Cayman (718) 2017>>
Cars With Option Codes:
029 - Standard Chassis
Diagram Ref No 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982513029H
982513029H
982513029D
982513029F
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Shock Absorber, Rear. Porsche 982 Cayman (718) 2017>> (982513029H/1)
Vehicle Group
Vehicle Group
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
€449.28 inc. VAT
Now €404.36 inc. VAT
In Stock - 24 Hour Dispatch
982513029H/1
Product Information
Sold Each.
Fits LEFT And RIGHT.
Fits:
Porsche 982 Cayman (718) 2017>>
Cars With Option Codes:
029 - Standard Chassis
Diagram Ref No 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982513029H
The product you are viewing cross references to these numbers
Product Information
Shock Absorber, Rear.Sold Each.
Fits LEFT And RIGHT.
Fits:
Porsche 982 Cayman (718) 2017>>
Cars With Option Codes:
029 - Standard Chassis
Diagram Ref No 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982513029H
982513029H
982513029D
982513029F
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
€224.64 inc. VAT
Now €202.18 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
982413029J/1KIT
Product Information
This package includes a pair of OE Match front suspension struts, designed as direct-fit replacements for the standard-suspension Porsche 718 Boxster and Cayman (982) models from 2017 onward. Each strut matches the original Porsche specifications for length, mounting geometry, and damping characteristics, ensuring balanced and predictable front-end performance when installed as a matched set.
SET OF 2, for both sides of the front axle.
Fits:
For cars with Standard chassis (option code: 029)
Porsche 982 Boxster (718) 2017>>
Porsche 982 Cayman (718) 2017>>
Diagram Ref No 1
Replacing struts in pairs is essential for maintaining even damping response across both sides of the front axle. This set restores correct chassis balance, steering precision, ride comfort, and braking stability - all crucial for the 718 platform’s handling dynamics.
These OE Match struts deliver smooth compression and controlled rebound, improving grip, stability, and comfort while driving on uneven roads or during spirited cornering. With factory-style fitment, no modifications are needed, making installation straightforward.
Why replace as a set?
• Ensures equal damping left and right
• Prevents uneven wear and inconsistent handling
• Restores proper geometry and braking stability
• Maximizes performance and comfort in everyday and sporty driving
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982413029J
The product you are viewing cross references to these numbers
Product Information
Front shock absorber (PAIR), for cars with Standard chassis (M029).This package includes a pair of OE Match front suspension struts, designed as direct-fit replacements for the standard-suspension Porsche 718 Boxster and Cayman (982) models from 2017 onward. Each strut matches the original Porsche specifications for length, mounting geometry, and damping characteristics, ensuring balanced and predictable front-end performance when installed as a matched set.
SET OF 2, for both sides of the front axle.
Fits:
For cars with Standard chassis (option code: 029)
Porsche 982 Boxster (718) 2017>>
Porsche 982 Cayman (718) 2017>>
Diagram Ref No 1
Replacing struts in pairs is essential for maintaining even damping response across both sides of the front axle. This set restores correct chassis balance, steering precision, ride comfort, and braking stability - all crucial for the 718 platform’s handling dynamics.
These OE Match struts deliver smooth compression and controlled rebound, improving grip, stability, and comfort while driving on uneven roads or during spirited cornering. With factory-style fitment, no modifications are needed, making installation straightforward.
Why replace as a set?
• Ensures equal damping left and right
• Prevents uneven wear and inconsistent handling
• Restores proper geometry and braking stability
• Maximizes performance and comfort in everyday and sporty driving
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982413029J
982413029J
982413029B
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Front Shock Absorber, Standard chassis. Porsche 982 Boxster / Cayman (718) 2017>> (982413029J/1)
Vehicle Group
Vehicle Group
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
€484.38 inc. VAT
Now €435.94 inc. VAT
Orderable - 30 to 60 Days
982413029J/1
Product Information
This OE Match front strut is engineered as a direct-fit replacement for the original front dampers on standard-suspension (M029) Porsche 718 Boxster and Cayman (model 982, 2017 onward). It matches the original strut’s mounting geometry, dimensions, and damping characteristics, ensuring that ride comfort, handling balance, and suspension behaviour remain factory-correct after installation.
Sold individually, two struts required for a full front-end refresh.
Fits:
For cars with Standard chassis (option code: 029)
Porsche 982 Boxster (718) 2017>>
Porsche 982 Cayman (718) 2017>>
Diagram Ref No 1
• Position: Front suspension strut — sold each (left or right); two required for a full front-end refresh.
• Superseded Part Number: 982413029B; 982413029J replaces the older part number.
This front strut absorbs shocks and road irregularities, dampens suspension movement, and controls rebound and compression. It keeps the front wheels in stable contact with the road surface, ensures predictable handling under braking, cornering, and acceleration, and maintains suspension geometry to provide a smooth, controlled ride. By replacing worn or weak front struts, you restore proper suspension control - reducing bounce, front-end instability, and handling vagueness, while improving comfort and safety.
Suspension struts degrade over time due to fluid leakage, internal wear, and repeated stress from road use. When front struts wear out:
• The ride becomes soft, bouncy or uncontrolled over bumps.
• Handling may become vague or unpredictable, with reduced cornering precision or increased body roll.
• Braking stability and contact with the road may suffer, reducing safety and comfort.
Replacing worn struts restores damping performance, ride quality, and suspension control - ensuring your 718 Boxster or Cayman behaves as originally intended.
When to Replace. You should consider replacing the front struts if you experience any of the following:
• Excessive bouncing or harshness over bumps
• Reduced ride comfort or increased vibration
• Unstable steering response or poor handling during cornering/braking
• Fluid leaks from existing dampers
• Age, high mileage, or previous suspension use - as part of maintenance or suspension refresh.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982413029J
The product you are viewing cross references to these numbers
Product Information
Front shock absorber, for cars with Standard chassis (M029).This OE Match front strut is engineered as a direct-fit replacement for the original front dampers on standard-suspension (M029) Porsche 718 Boxster and Cayman (model 982, 2017 onward). It matches the original strut’s mounting geometry, dimensions, and damping characteristics, ensuring that ride comfort, handling balance, and suspension behaviour remain factory-correct after installation.
Sold individually, two struts required for a full front-end refresh.
Fits:
For cars with Standard chassis (option code: 029)
Porsche 982 Boxster (718) 2017>>
Porsche 982 Cayman (718) 2017>>
Diagram Ref No 1
• Position: Front suspension strut — sold each (left or right); two required for a full front-end refresh.
• Superseded Part Number: 982413029B; 982413029J replaces the older part number.
This front strut absorbs shocks and road irregularities, dampens suspension movement, and controls rebound and compression. It keeps the front wheels in stable contact with the road surface, ensures predictable handling under braking, cornering, and acceleration, and maintains suspension geometry to provide a smooth, controlled ride. By replacing worn or weak front struts, you restore proper suspension control - reducing bounce, front-end instability, and handling vagueness, while improving comfort and safety.
Suspension struts degrade over time due to fluid leakage, internal wear, and repeated stress from road use. When front struts wear out:
• The ride becomes soft, bouncy or uncontrolled over bumps.
• Handling may become vague or unpredictable, with reduced cornering precision or increased body roll.
• Braking stability and contact with the road may suffer, reducing safety and comfort.
Replacing worn struts restores damping performance, ride quality, and suspension control - ensuring your 718 Boxster or Cayman behaves as originally intended.
When to Replace. You should consider replacing the front struts if you experience any of the following:
• Excessive bouncing or harshness over bumps
• Reduced ride comfort or increased vibration
• Unstable steering response or poor handling during cornering/braking
• Fluid leaks from existing dampers
• Age, high mileage, or previous suspension use - as part of maintenance or suspension refresh.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
982413029J
982413029J
982413029B
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 718 2.0L Manual (300 Bhp)
- Porsche Boxster 718 2.0L PDK (300 Bhp)
- Porsche Boxster S 718 2.5L Manual (350 Bhp)
- Porsche Boxster S 718 2.5L PDK (350 Bhp)
- Porsche Boxster T 718 2.0L Manual (300 Bhp)
- Porsche Boxster T 718 2.0L PDK (300 Bhp)
- Porsche Boxster GTS 718 2.5L Manual (365 Bhp)
- Porsche Boxster GTS 718 2.5L PDK (365 Bhp)
- Porsche Cayman 718 2.0L Manual (300Bhp)
- Porsche Cayman 718 2.0L PDK (300Bhp)
- Porsche Cayman S 718 2.5L Manual (350Bhp)
- Porsche Cayman S 718 2.5L PDK (350Bhp)
- Porsche Cayman T 718 2.0L Manual (300Bhp)
- Porsche Cayman T 718 2.0L PDK (300 Bhp)
- Porsche Cayman GTS 718 2.5L Manual (365 Bhp)
- Porsche Cayman GTS 718 2.5L PDK (365 Bhp)
€242.19 inc. VAT
Now €217.97 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
98134304113/1KIT
Product Information
Left And Right.
Fits:
Porsche 981 Boxster 2012>>2016
Cars With Option Codes:
029 - Standard Chassis
Diagram Ref No 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98134304113
The product you are viewing cross references to these numbers
Product Information
Shock Absorbers (PAIR), Front.Left And Right.
Fits:
Porsche 981 Boxster 2012>>2016
Cars With Option Codes:
029 - Standard Chassis
Diagram Ref No 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98134304113
98134304104
98134304105
98134304109
98134304111
98134304113
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
2 x Shock Absorber, Front. Porsche 981 Boxster 2012>>2016 (98134304113/1)
Vehicle Group
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
€556.92 inc. VAT
Now €501.22 inc. VAT
In Stock - 24 Hour Dispatch
98134304113/1
Product Information
Sold Each.
Fits Left And Right.
Fits:
Porsche 981 Boxster 2012>>2016
Cars With Option Codes:
029 - Standard Chassis
Diagram Ref No 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98134304113
The product you are viewing cross references to these numbers
Product Information
Shock Absorber, Front.Sold Each.
Fits Left And Right.
Fits:
Porsche 981 Boxster 2012>>2016
Cars With Option Codes:
029 - Standard Chassis
Diagram Ref No 1
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
98134304113
98134304104
98134304105
98134304109
98134304111
98134304113
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
€278.46 inc. VAT
Now €250.61 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Call us
We're happy to help!
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed
Customer Care
Information