OE Match

Strengthening gusset plate set rear trailing arm. 
Sold as a pair

Fits:
Porsche 911 - 1971 to 1973

Upgrade and strengthen the rear trailing arms with these weld on gusset plates. 

Welds to diagram ref no 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133105420

The product you are viewing cross references to these numbers

Strengthening plate rear tunnel inspection hole. 

Fits:
Porsche 911 - 1965 to 1989

Weld on strengthening panel to be welded around the gear shift linkage inspection hole (on centre tunnel)

Rear brake caliper set. 

Sold as a pair

Fits:
Porsche 911 R - 1967 to 1968

Mounting hole distance: 77mm

Cast aluminium

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90135296532

The product you are viewing cross references to these numbers

RSR brake fluid reservoir set. 

Fits:
Porsche 911 - 1965 to 1989

Proper ATE markings on reservoirs, caps and underneath the cap
Comes with correct inner strainers.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91735501200

The product you are viewing cross references to these numbers

Rear brake caliper set. 

Sold as a pair

Fits:
Porsche 911S / 911L - 1967 to 1968

Mounting hole distance: 57mm

The Porsche 911S produced in 1967 was equipped with cast iron rear brake calipers. The 1967 Porsche 911S was powered by a 2.0-liter flat-six engine that produced 160 horsepower. This model was the first 911S to feature ventilated disc brakes on all four wheels, which provided improved stopping power and reduced the risk of brake fade during extended use.
The rear brake calipers on the 1967 Porsche 911S were cast iron to provide durability and resistance to wear. Cast iron is a strong and durable material that can withstand high temperatures and stresses, making it well-suited for use in high-performance braking systems.
Overall, the cast iron rear brake calipers on the 1967 Porsche 911S were an important component of the car's braking system, providing reliable and effective stopping power for a high-performance sports car.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90135296532

The product you are viewing cross references to these numbers

Handbrake guide sleeve.

Fits:
Porsche 911 - 1978 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1995 to 1998
Porsche 928 - 1978 to 1991
Porsche 968 - 1992 to 1995
Porsche 944 - 1985 to 1991

Diagram ref no 39

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91442425800

The product you are viewing cross references to these numbers

Handbrake turnbuckle.
This replacement handbrake turnbuckle (also known as a compensating lever) is built to match Porsche’s original factory specifications. Direct replacement restores proper parking brake adjustment, safety, and reliability. It sits under the car, in the tunnel area where the two rear handbrake cables meet the central handbrake lever linkage.

Fits:
Porsche 911 1965 - 1989
Porsche 911 (930) Turbo 1975 - 1989

Diagram ref no 25

What it does:
•  Provides precise adjustment and compensation within the handbrake cable linkage, allowing correct tension of the parking brake system
•  Helps maintain smooth, even pull on the handbrake cable so the brakes engage and release properly
•  Ensures the handbrake lever mechanism works consistently and reliably

Over time, the turnbuckle can wear, bend, or lose its ability to hold adjustment, leading to a slack or uneven handbrake A defective or misaligned unit may cause parking brake dragging, poor handbrake hold, or uneven cable tension Installing an replacement restores correct geometry and adjustment capability without modification Helps preserve safety, parking stability, and original handling characteristics.

The turnbuckle (compensating piece) links and balances both cables, allowing even adjustment so the parking brake applies equally to both rear wheels. Accessible when servicing or adjusting the handbrake mechanism and typically replaced when cables are serviced or stretched.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90142456800

The product you are viewing cross references to these numbers

Support tube rear bumper heat insulation - fits left or right hand side
Sold each - 2 required per car

Fits:
Porsche 964 - 1989 to 1994
Porsche 964 RS - 1991 to 1993
Porsche 964 turbo - 1991 to 1993

Diagram ref no 17

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96450487500

The product you are viewing cross references to these numbers

Lightweight rear bumper horn / over rider - aluminium
Sold as a pair

Fits:
Porsche 911 - 1965 to 1973

Aluminium bumper over rider is 300g, original item 650g



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150503322

The product you are viewing cross references to these numbers

Fuel pump.

Fits:
Porsche 997.2 Turbo 2010 - 2013
Porsche 997.2 Turbo S 2011 - 2013

Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99762014802

The product you are viewing cross references to these numbers

Oil return line set turbocharger. 
Sold as a pair

Fits:
Porsche 993 turbo - 1994 to 1997

Porsche 993 Turbo - oil pump to tank

Optimised shape to prevent backflow to the turbocharger oil tank. Manufactured in high quality stainless steel pipe, these oil lines prevent oil from flowing back to the turbocharger, which leads to excessive oil burning and smoking after long idle time

Diagram ref no 20 and 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99310733KIT

The product you are viewing cross references to these numbers

Oil tandem pump vacuum line.

Fits:
Porsche 997.1 Carrera 3.6ltr / 3.8ltr - 2005 to 2008

Diagram ref no 37

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99710705505

The product you are viewing cross references to these numbers

Handbrake cable bracket.

Fits:
Porsche 928 - 1980 to 1995

Diagram ref no 16



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92842404500

The product you are viewing cross references to these numbers

Rear Muffler Mounting Rubber Buffer.
Sold each - 2 required per car

Fits:
Porsche 924 1976 to 1985
Porsche 924 turbo - 1979 to 1984

Diagram Ref No. 19

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

477253149C

The product you are viewing cross references to these numbers

Sealing ring exhaust downpipe to front silencer. 

Fits:
Porsche 924 - 1976 to 1985

Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

477253137

The product you are viewing cross references to these numbers

REAR Bumper over rider with rubber moulding - Special edition Matt Black
Sold as a pair

Fits:
Porsche 911 1965 to 1973
Porsche 911 RS 2.7 - 1972 to 1973
Porsche 912 1965 to 1970


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90150503326

The product you are viewing cross references to these numbers