Please wait… 
Please wait while we process your order,
do not press the back button… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://design91.uk/images/schemaLogo.png https://design91.uk/images/schemaLogo.png +443456003478 https://design91.uk Facebook Instagram

OE Match

OE Match
About OE Match

OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.

OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations.

DISPLAYING 401 to 416 (of 6819 products)
99734304X41/1KIT
Product Information
Product Information
Shock Absorber Front, SET OF 2 (Left and right).
These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.

Kit includes:
 1 × 99734304741 - OE Match Front Left PASM Shock
 1 × 99734304841 - OE Match Front Right PASM Shock

front
Fits:
Replacement for Car with PASM Electronic Damper Control (option code: 475)
Porsche 997.1 Carrera 4 / Carrera 4S  2005 - 2008 Coupe / Cabrio
Porsche 997.2 Carrera 4 / Carrera 4S  2009 - 2012 Coupe / Cabrio

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers
  •  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.       

Diagram ref no 1

Over time, PASM front shock absorbers lose their damping accuracy, which affects both comfort and handling. Worn dampers can cause inconsistent ride quality, reduced steering precision and poor stability over bumps or under braking. Replacing them restores full PASM functionality, ensuring the suspension reacts correctly in all modes and returns the 911’s signature balanced, confident road feel.

When to Replace:
PASM fault messages appear
 Leaking hydraulic fluid from either damper
 Front suspension feels harsh, bouncy or unstable
 Noticeable decline in steering precision
 Completing a suspension refresh for optimal handling

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99734304X41
99734304715
99734304815
99734304708
99734304824
99734304710
99734304714
99734304814
99734304822
99734304722
99734304724
99734304726
22-147561
99734304826
22-147554
99734304808
99734304810
99734304841
99734304741

The product you are viewing cross references to these numbers
99634398009/2KIT
Product Information
Product Information
Shock absorber additional springs. SET OF 2. fits the FRONT Cars with SPORT chassis (Option code: I030/I480)  one additional spring is required for each shock absorber, this is a set of 2 
This is for the shock absorber as an additional spring, also known as a bump stop, stopper or helper spring, designed for the front strut assemblies on Porsche 997 models equipped with the Sport chassis (option codes I030 or I480). Front axle suspension assembly for Porsche 996/997 (1998–2012), serving as a rubber stop or bushing integrated into the strut structure.

Fits:
Porsche 997 C2 / C2S / C4 / C4S MKI 2005-08 - Cars with SPORT chassis (Option code: I030/I480)

Porsche 997 C2 / C2S / C4 / C4S MKII 2009-12 - Cars with SPORT chassis (Option code: I030)


This acts as a progressive load-bearing element, cushioning the suspension when the strut nears full compression. It helps prevent harsh bottoming-out, protecting both the strut and chassis from damage during aggressive driving or over bumps. These components maintain ride quality and handling performance, especially under heavy loading or spirited cornering, keeping the suspension linear and controlled. 

Common Issues & Considerations Wear or Deterioration: Over time, the rubber can compress, crack, or lose elasticity, diminishing its effectiveness. This can lead to harsher suspension impacts at full compression. Noise or Harsh Feedback: A worn or hardened bump stop can transmit noise or impacts through the cabin, particularly over rough roads or speed bumps. Sport vs. Standard Suspension: These parts are specific to Sport chassis models. Non-sport setups may not have the same bump stops or use different part numbers, so swapping or replacing must be done accordingly. 

Click 'Zoom in' for large parts diagram.
Diagram ref no 9



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99634398009
99634398009

The product you are viewing cross references to these numbers
99634398009/2
Product Information
Product Information
Shock absorber additional spring. fits the FRONT Cars with SPORT chassis (Option code: I030/I480)  one additional spring is required for each shock absorber, the price is each. 
This is for the shock absorber as an additional spring, also known as a bump stop, stopper or helper spring, designed for the front strut assemblies on Porsche 997 models equipped with the Sport chassis (option codes I030 or I480). Front axle suspension assembly for Porsche 996/997 (1998–2012), serving as a rubber stop or bushing integrated into the strut structure.

Fits:
Porsche 997 C2 / C2S / C4 / C4S MKI 2005-08 - Cars with SPORT chassis (Option code: I030/I480)

Porsche 997 C2 / C2S / C4 / C4S MKII 2009-12 - Cars with SPORT chassis (Option code: I030)


This acts as a progressive load-bearing element, cushioning the suspension when the strut nears full compression. It helps prevent harsh bottoming-out, protecting both the strut and chassis from damage during aggressive driving or over bumps. These components maintain ride quality and handling performance, especially under heavy loading or spirited cornering, keeping the suspension linear and controlled. 

Common Issues & Considerations Wear or Deterioration: Over time, the rubber can compress, crack, or lose elasticity, diminishing its effectiveness. This can lead to harsher suspension impacts at full compression. Noise or Harsh Feedback: A worn or hardened bump stop can transmit noise or impacts through the cabin, particularly over rough roads or speed bumps. Sport vs. Standard Suspension: These parts are specific to Sport chassis models. Non-sport setups may not have the same bump stops or use different part numbers, so swapping or replacing must be done accordingly. 

Click 'Zoom in' for large parts diagram.
Diagram ref no 9



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99634398009
99634398009

The product you are viewing cross references to these numbers
982513031F/1KIT
Product Information
Product Information
Rear shock absorbers for cars with Sports Suspension M030). 
A pair of rear suspension shock absorbers engineered to the same specifications as the original equipment parts. Designed for direct bolt-on installation, each shock fits the left and right rear suspension of the 982 (718) Boxster and Cayman models equipped with Sports suspension (M030).
SET OF 2, Left and right shock absorber.

Fits:
For cars with Sports Suspension (option codes: 030)

Porsche 982 Boxster (718) 2017>>
Porsche 982 Cayman (718) 2017>>

Diagram Ref No 1

This OE Match shock absorber set delivers factory-equivalent ride control and stability. Manufactured to meet OEM performance standards, these shocks provide precise damping response, dependable rebound control, and durable operation under both everyday driving and spirited use.

Replacing rear shocks as a pair ensures symmetrical damping on both sides, restoring correct chassis balance, rear-end stability, and consistent handling feel.

These rear dampers absorb road impacts and vibrations to provide a smoother, more controlled ride. They regulate both compression and rebound forces, helping the suspension respond predictably under all driving conditions. By maintaining proper alignment and reducing stress on surrounding components, they preserve the balanced, sporty ride quality expected from the 718 series.

Worn or weakened rear shocks can lead to:
 Reduced stability and grip
Excessive bouncing over bumps
 Uneven or unpredictable handling
 Longer braking distances
 Accelerated tyre and suspension wear

Installing a pair restores proper damping performance, improves driving confidence, and preserves the balanced road feel.

Replace your rear shocks if you notice:
 Leaking fluid around the dampers
 Excessive bounce or instability at the rear
 Degraded ride comfort or harshness
 Uneven tyre wear or poor cornering response
 Suspension upgrades, repairs, or mileage-related wear (typically 50k–70k miles+)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982513031F
982513031F
982513031A
982513031D

The product you are viewing cross references to these numbers
982513031F/1
Product Information
Product Information
Rear shock absorber for cars with Sports Suspension (M030).
The rear suspension strut/shock absorber mounts between the rear frame and the rear suspension on 982 (718) Boxster/Cayman models equipped with the sport suspension (option code: 030). It controls the damping and rebound of the rear suspension, absorbing road imperfections and maintaining tire contact with the ground, providing stability, comfort, and handling. 
Sold each, Fits left and right side

Fits:
For cars with Sports Suspension (option codes: 030)
Porsche 982 Boxster (718) 2017>>
Porsche 982C Cayman (718C) 2017>>

Diagram ref no 1

This shock absorber regulates the suspension’s movement by absorbing and damping motion as the rear wheels react to road surfaces, bumps or dynamic forces. It ensures the rear end remains stable and controlled during acceleration, braking, cornering, or over uneven surfaces. By restoring proper damping performance, it helps maintain ride comfort, correct suspension geometry, and sharp handling characteristics that Porsche intended.

Shock absorbers degrade over time through wear, leaking seals, and internal fatigue. When rear dampers lose effectiveness, the suspension becomes uncontrolled: leading to poor ride comfort, excessive bouncing over bumps, reduced traction, worsened handling, and increased strain on tyres and suspension components. Replacing with a new damper restores proper damping performance - ensuring ride comfort, handling precision, stability, and safety. This is particularly important for a sports car like the 982 Boxster / Cayman, where chassis balance and dynamic response are critical to the driving experience.

When to replace
  You should consider replacing the rear shock absorbers if you notice any of the following:
  Bouncing or excessive vertical motion over bumps.
  Reduced stability under braking, cornering or on uneven roads.
  Unusual “floating” ride, lack of suspension control, or degraded handling feel.
  Fluid leaks from the old dampers or visibly worn / damaged units.
  You are performing suspension overhaul, upgrading ride quality, or restoring front/rear suspension on the car.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982513031F
982513031F
982513031A
982513031D

The product you are viewing cross references to these numbers
992413031AD/1KIT
Product Information
Product Information
Suspension Shock Absorbers Damper Strut (PAIR), Front. Without Option Code: -E0W
For Cars With Standard And Controlled Suspension System. - Left And Right.

These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.

Fits:
Porsche 992.1 Carrera MKI 2019>>2024  (Without Option Code: -E0W)

Porsche 992.2 Carrera MKII 2024 >>

Diagram Ref No 1

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers
  • Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.                   



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992413031AD
992413031E
992413031D
992413031AD

The product you are viewing cross references to these numbers
992413031AD/1
Product Information
Product Information
Suspension Shock Absorber Damper Strut, Front. Without Option Code: -E0W
For Cars With Standard And Controlled Suspension System - Sold Each, Fits Left And Right.

These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.


Fits:
Porsche 992.1 Carrera MKI 2019>>2024  (Without Option Code: -E0W)

Porsche 992.2 Carrera MKII 2024 >>

Diagram Ref No 1

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers
  • Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.                   



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992413031AD
992413031E
992413031D
992413031AD

The product you are viewing cross references to these numbers
982513029H/1KIT
Product Information
Product Information
Shock Absorbers (PAIR), Rear.
Left And Right.

Fits:
Porsche 982 Cayman (718) 2017>>
Cars With Option Codes:
029 - Standard Chassis

Diagram Ref No 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982513029H
982513029H
982513029D
982513029F

The product you are viewing cross references to these numbers
982513029H/1
Product Information
Product Information
Shock Absorber, Rear.
Sold Each.
Fits LEFT And RIGHT.

Fits:
Porsche 982 Cayman (718) 2017>>
Cars With Option Codes:
029 - Standard Chassis

Diagram Ref No 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982513029H
982513029H
982513029D
982513029F

The product you are viewing cross references to these numbers
982413029J/1KIT
Product Information
Product Information
Front shock absorber (PAIR), for cars with Standard chassis (M029).
This package includes a pair of OE Match front suspension struts, designed as direct-fit replacements for the standard-suspension Porsche 718 Boxster and Cayman (982) models from 2017 onward. Each strut matches the original Porsche specifications for length, mounting geometry, and damping characteristics, ensuring balanced and predictable front-end performance when installed as a matched set.
SET OF 2, for both sides of the front axle.

Fits:
For cars with Standard chassis (option code: 029)
Porsche 982 Boxster (718) 2017>>
Porsche 982 Cayman (718) 2017>>

Diagram Ref No 1

Replacing struts in pairs is essential for maintaining even damping response across both sides of the front axle. This set restores correct chassis balance, steering precision, ride comfort, and braking stability - all crucial for the 718 platform’s handling dynamics.

These OE Match struts deliver smooth compression and controlled rebound, improving grip, stability, and comfort while driving on uneven roads or during spirited cornering. With factory-style fitment, no modifications are needed, making installation straightforward.

Why replace as a set?
Ensures equal damping left and right
 Prevents uneven wear and inconsistent handling
 Restores proper geometry and braking stability
 Maximizes performance and comfort in everyday and sporty driving

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982413029J
982413029J
982413029B

The product you are viewing cross references to these numbers
982413029J/1
Product Information
Product Information
Front shock absorber, for cars with Standard chassis (M029).
This OE Match front strut is engineered as a direct-fit replacement for the original front dampers on standard-suspension (M029) Porsche 718 Boxster and Cayman (model 982, 2017 onward). It matches the original strut’s mounting geometry, dimensions, and damping characteristics, ensuring that ride comfort, handling balance, and suspension behaviour remain factory-correct after installation.
Sold individually, two struts required for a full front-end refresh.

Fits:
For cars with Standard chassis (option code: 029)
Porsche 982 Boxster (718) 2017>>
Porsche 982 Cayman (718) 2017>>

Diagram Ref No 1

Position: Front suspension strut — sold each (left or right); two required for a full front-end refresh.
 Superseded Part Number: 982413029B; 982413029J replaces the older part number.

This front strut absorbs shocks and road irregularities, dampens suspension movement, and controls rebound and compression. It keeps the front wheels in stable contact with the road surface, ensures predictable handling under braking, cornering, and acceleration, and maintains suspension geometry to provide a smooth, controlled ride. By replacing worn or weak front struts, you restore proper suspension control - reducing bounce, front-end instability, and handling vagueness, while improving comfort and safety.

Suspension struts degrade over time due to fluid leakage, internal wear, and repeated stress from road use. When front struts wear out:
 The ride becomes soft, bouncy or uncontrolled over bumps.
 Handling may become vague or unpredictable, with reduced cornering precision or increased body roll.
 Braking stability and contact with the road may suffer, reducing safety and comfort.
Replacing worn struts restores damping performance, ride quality, and suspension control - ensuring your 718 Boxster or Cayman behaves as originally intended.

When to Replace. You should consider replacing the front struts if you experience any of the following:
 Excessive bouncing or harshness over bumps
 Reduced ride comfort or increased vibration
 Unstable steering response or poor handling during cornering/braking
 Fluid leaks from existing dampers
 Age, high mileage, or previous suspension use - as part of maintenance or suspension refresh.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

982413029J
982413029J
982413029B

The product you are viewing cross references to these numbers
98134304113/1KIT
Product Information
Product Information
Shock Absorbers (PAIR), Front.
Left And Right.

Fits:
Porsche 981 Boxster 2012>>2016
Cars With Option Codes:
029 - Standard Chassis

Diagram Ref No 1


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98134304113
98134304104
98134304105
98134304109
98134304111
98134304113

The product you are viewing cross references to these numbers
98134304113/1
Product Information
Product Information
Shock Absorber, Front.
Sold Each.
Fits Left And Right.


Fits:
Porsche 981 Boxster 2012>>2016
Cars With Option Codes:
029 - Standard Chassis

Diagram Ref No 1


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98134304113
98134304104
98134304105
98134304109
98134304111
98134304113

The product you are viewing cross references to these numbers
98733305128/1KIT
Product Information
Product Information
Shock Absorbers (PAIR), Rear.
Left And Right.

Fits:

Porsche 987 Cayman 2.9L MKII 2009>>2012
Porsche 987 Cayman S 3.4L MKII 2009>>2012
Porsche 987 Boxster 2.9L MKII 2009>>2012
Porsche 987 Boxster S 3.4L MKII 2009>>2012
Cars With Option Codes:
029 - Standard Chassis

Diagram Ref No 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98733305128
98733305116
98733305128
98733305122
22-147585

The product you are viewing cross references to these numbers
94473103
Product Information
Product Information
Sun visor mounting bracket - Coupe

Fits:
Porsche 944 - 1985 to 1991
Porsche 968 - 1992 to 1995

For Coupe models only

Bracket for diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94473103
9447310310105T
944731031014RB
944731031013MX
9447310310205T
944731031024RB
944731031023MX
9447310320105T
944731032014RB
944731032013MX
9447310320205T
944731032024RB
944731032023MX

The product you are viewing cross references to these numbers
99331405027/1
Product Information
Product Information
Power steering pump seal kit.

Fits:
Porsche 993 Carrera 1994-1998
not for Turbo models

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99331405027
99331405027

The product you are viewing cross references to these numbers
DISPLAYING 401 to 416 (of 6819 products)