Please wait…

Please wait while we process your order,
do not press the back button…

Brands >

OE Match

About OE Match

OE Match for Porsche

OE Match is a brand that provides a wide range of Porsche components, from gaskets to suspension hardware, engine parts, and interior trim. Over 6,700 individual part numbers, and over 11,800 OE cross-references catalogued, and are constantly developing new lines.OE Match has over 100 new products currently in the engineering phase, which will be quality-controlled and added to their catalog. The mission is to keep all Porsche vehicles on the road by offering a vast selection of parts that can address various problems across different Porsche generations

A Quick Look at OE Match

OE Match information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.

Choosing the Right Fit for Your Porsche

Where OE Match is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.

Often chosen when owners want OE-equivalent quality with sensible running costs, especially for routine service and wear items.
Typical reasons to replace include restoring reliability, addressing age-related wear, or refreshing multiple components during larger repair work.
Common defects from incorrect application include noise, premature wear, leaks, or fitment quirks if the wrong variant is selected or fitted with old seals/hardware.
Watch for symptoms such as unusual noises, early wear, or repeat failures after recent work, which can indicate mismatched parts or supporting items left worn.
Always cross-check OEM part numbers, read model-year notes, and verify compatibility before ordering.
For safety-critical components, confirm specification and fitment carefully and have installation checked by a competent technician.

Browse by Category

If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.

Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, longer stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.

Brake Pad Wear Sensors — Brake pad wear sensors are replaced when pads are renewed or when warning lights indicate a broken or worn sensor. Symptoms include brake wear warnings even with new pads, damaged sensor cables, or broken clips around the caliper area.

Engine Electrical — Engine electrical parts are changed when there are starting, charging, ignition, or sensor-related faults that affect drivability and reliability, such as intermittent no-start, misfires, rough idle, poor charging, warning lights or heat-soak failures.

Service Parts — Service parts are replaced as routine maintenance to keep the engine and systems reliable, efficient, and protected, often resolving hard starting, rough idle, poor fuel economy and warning lights caused by clogged filters or worn ignition components.

Service Kits — Service kits bundle key service components to simplify maintenance and set the car back to a known baseline, especially useful when catching up on overdue servicing or dealing with general sluggish running, inconsistent idle and reduced performance.

For brake parts, confirm whether items are OE-equivalent replacements or performance upgrades and check if new fitting kits and sensors are required.
On service items and kits, match the kit to your exact Porsche model, engine and year, and review what is included so you can add any extra “while you are there” parts.

Explore OE Match at Design911

View the current OE Match range for Porsche at Design911, then filter by model and category to narrow down to the right parts.

4 4 4 4

Underbody side cover tray. Porsche 981 / 991 / GT4

99150460

Product Information

Underbody side cover tray.

Fits:
Porsche 981 Boxster / Cayman
Porsche 991.1
Porsche 982 / 718 Boxster / Cayman
Porsche 991.2
Porsche 981 Spyder
Porsche GT3 Cayman

Diagram ref no 8

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99150460

99150460600

99150460500

The product you are viewing cross references to these numbers

4 4 4 4

Centre undertray. Porsche 991 / 981 Boxster / 981 Cayman / 982 (718)

99150460300/1

Product Information

Centre undertray.

Fits:
Porsche 991.1 2012-16
Porsche 991.2 2017-19
Porsche 991 Turbo 2014-20
Porsche 981 Boxster 2012-16
Porsche 982 (718) Boxster 2017>>
Porsche 981C Cayman 2014-16
Porsche 982C (718C) Cayman 2017>>

Diagram ref no 4

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99150460300

99150460300

The product you are viewing cross references to these numbers

4 4 4 4

Front undertray cover. Porsche 991 / 981

99150460109/1

Product Information

Front undertray cover.

Fits:
Porsche 981 Boxster 2012-16

Porsche 981C Cayman 2014-16

Porsche 982 Boxster 2017-21

Porsche 982C Cayman 2017-21

Porsche 991.1 2012-2016

Porsche 991.2 2017-2019

Porsche GT4.1 / GT4.2

Porsche Spyder MKI & MKII

Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99150460109

99150460107

99150460100

99150460103

99150460104

99150460109

The product you are viewing cross references to these numbers

3 3 3

Door Lock RHD / LEFT SIDE. Porsche Boxster 986 / 996 Cars with M534/M535 Theft Security System

3B2837015F/1

Product Information

Door Lock RHD / LEFT SIDE Cars with M534/M535 Theft Security System

This lock is designed for the left front door of the Porsche Boxster (986) and 911 (996) models. It securely locks and integrates with the vehicle's locking system and central locking module, ensuring secure closing, reliable locking/unlocking, and proper connection to the door handle, latch, and vehicle electrical system. Built to original specification for secure fitment, reliable operation and long-term durability

Fits:
Porsche Boxster 986 from 1998 onwards
* with M534/M535 Theft Security System

Porsche 996 1998 - 2005
* with M534/M535 Theft Security System

Diagram ref no 14

• Position on Vehicle: Left-hand (driver’s side) front door lock assembly, integrated into the door latch/lock mechanism and electrically connected to central locking system.

• Cross-Reference / Alternative Numbers: OEM number: 3B2 837 015 F (3B2837015F)

• Applications: Replacement when original door lock is worn, failing to lock/unlock properly, noisy, mis-aligned or when restoring the door mechanism during bodywork or refurbishment.

A properly functioning door lock is integral to vehicle security, safe operation and user convenience. When the lock mechanism begins to wear, fail or mis-operate you may experience doors that won’t latch securely, central locking faults, key remote issues or increased noise/vibration. Replacing the unit restores secure locking, correct door alignment and peace of mind.

When and why to replace:
• Door fails to stay locked or latch properly.
• Key remote or central locking system reports fault or inconsistent behaviour.
• Audible clicking, grinding or resistance when operating door lock/unlock.
• After door removal, panel replacement, accident repairs or restoration where access to the lock assembly already occurs.
• On older vehicles where original door lock mechanisms are approaching wear limits or have inconsistent performance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3B2837015F

8N2837015F

3B2837015F

The product you are viewing cross references to these numbers

3 3 3

Drop link rear. Porsche 971 Panamera / 9J1 Taycan

971511467E/1

Product Information

Drop link rear.
Sold each - 2 required per car

oematch

Fits:
Porsche 971.1 Panamera - 2017 to 2020
With Option Code
1P0 - Standard Suspension

Porsche 971.2 - 2021 to 2023
Porsche 9J1 Taycan - 2020 Onwards
With Option Code
1P7 - PDCC/eAWS

Click 'Zoom in' for large parts diagram.
Diagram ref no 5

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

971511467E

971511467D

971511467F

971511467B

971511467E

971511467C

The product you are viewing cross references to these numbers

4 4 4 4

Vacuum pump for brake servo. Porsche 987/981 Boxster / 987C/981C Cayman / 997 / 991

9A111009008/2

Product Information

This vacuum pump is a component in the brake servo (brake booster) system in various Porsche models (Boxster/Cayman, 997, 991, etc.). It helps generate the vacuum needed by the brake booster so that the driver has power assistance when applying the brakes.

In many modern Porsche engines (especially at higher performance levels, forced induction, or in engines where manifold vacuum is insufficient under certain operating conditions), an auxiliary vacuum pump is used because the engine’s intake manifold vacuum alone may not always provide adequate or stable vacuum for the brake booster.

The pump is typically driven mechanically (via the engine belt, accessory drive, or via an electric drive depending on vehicle) and draws vacuum from a chamber, then supplies that vacuum to the brake booster. Because the brake booster relies on consistent vacuum, degradation or failure of this pump can lead to harder brake pedal efforts or weak assistance under certain conditions.

Loss of vacuum / reduced vacuum output As the pump wears, internal leaks (seals, vanes, diaphragms) reduce its ability to maintain the required vacuum level. This causes the brake servo to get less assist, making the pedal feel harder.

Fits:

Porsche Boxster 987 MKII 2.9L 2009-2012
Porsche Boxster S 987 MKII 3.4L 2009-2012
Porsche Boxster 981 2.7L 2012-16
Porsche Boxster 981 S / GTS 3.4L 2012-16
Porsche 997 MKII Carrera C2 3.6L 2009-12
Porsche 997 MKII Carrera C4 3.6L 2009-12
Porsche 997 MKII Carrera C2S 3.8L 2009-12
Porsche 997 MKII Carrera C4S 3.8L 2009-12
Porsche 997 MKII Turbo 2010-13
Porsche 997 MKII GT2 RS 2011-13
Porsche 991.1 Carrera C2 3.4L (350Bhp) 2012-16
Porsche 991.1 Carrera C2S 3.8L (400Bhp) 2012-16
Porsche 991.1 Carrera C4 3.4L (350Bhp) 2012-16
Porsche 991.1 Carrera C4S 3.8L (400Bhp) 2012-16
Porsche 991.1 Turbo 3.8L (520bhp) 2014-16
Porsche Cayman 2.9L 987C MKII 2009-12
Porsche Cayman S / R 3.4L 987C MKII 2009-12
Porsche Cayman 2.7L 981 2013-16
Porsche Cayman S / GTS 3.4L 981 2013-16

Diagram ref no 10

This pump generates the vacuum required by the brake booster (servo), allowing the system to amplify pedal force for smooth, consistent braking. By maintaining the correct vacuum pressure under varying engine loads, it ensures stable braking response and driver confidence.

Why replacement matters:

Intermittent vacuum supply. Pump may fail or fluctuate in output under certain engine speeds or loads, leading to inconsistent pedal feel.
Mechanical wear / bearing failure. The internal rotating components, bearings, or drive shaft can wear, leading to noise, inefficiency, or eventual seizure.
Leaks (external or internal). Seal failure can cause air leaks (vacuum loss) or allow unmetered air into the system, reducing servo effectiveness.
Cracks, housing damage or corrosion. Over time, housing cracks or corrosion can affect integrity and result in leaks or mechanical failure.
Failure of check valves / one-way valves. Some pump assemblies include check valves to maintain vacuum or prevent backflow; if these fail, vacuum can be lost.
Age / fatigue. After many years and many duty cycles, material fatigue and seal degradation can degrade performance even without catastrophic failure.
Associated component failure. Blocked vacuum lines, failed hoses, or clogged filters can mimic pump failure; sometimes the pump is replaced during diagnosis or when other parts are replaced.

Replacing with an OE Match unit restores factory-level performance, reliability, and safe braking operation.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9A111009008

9A111009005

9A111009004

9A111009003

9A111009002

9A111009006

9A111009001

9A111009007

9A111009008

The product you are viewing cross references to these numbers

Rear upper centre track control arm. Porsche 971 Panamera

971505323B/1

Product Information

Rear upper centre track control arm.

Sold each - 2 required per car

oematch

Fits:
Porsche 971.1 Panamera - 2017 to 2020
Porsche 971.2 Panamera - 2021 to 2023

Click 'Zoom in' for large parts diagram.
Diagram ref no 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

971505323B

971505323B

971505323A

971505323

The product you are viewing cross references to these numbers

4 4 4 4

Track rod inner joint. Porsche 992 / turbo / GT3

992423810/1

Product Information

Track rod inner joint.
Sold each - 2 required per car

oematch

Fits:
Porsche 992 - 2019 onwards
Porsche 992 turbo - 2020 onwards
Porsche 992 GT3 / GT3 RS - 2021 onwards

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992423810

992423810

The product you are viewing cross references to these numbers

4 4 4 4

Hydro mounting front lower wishbone. Porsche 971.2 Panamera / 9JA Taycan

97140718

Product Information

Hydro mounting front lower wishbone

oematch

Fits:
Porsche 971.2 Panamera - 2021 to 2023
Porsche 9JA Taycan - 2020 Onwards

Click 'Zoom in' for large parts diagram.
Diagram ref no 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97140718

971407183D

971407182D

The product you are viewing cross references to these numbers

4 4 4 4

Control arm, Rear, Upper. Porsche 991 / 992 Carrera / 992 Turbo

9P1505237B/1

Product Information

Control arm, Rear, Upper.

oematch

Fits:

Porsche 991.1 2012-16

Porsche 991.2 2017>>

Porsche 991 Turbo 2014>>

Porsche 992 Carrera 2019>>
For cars with Standard rear axle (option code: 0N1)

Porsche 992 Turbo 2020>>
For cars with Standard rear axle (option code: 0N5)

Click 'Zoom in' for large parts diagram.
Diagram ref no 13

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505237B

9P1505237B

99133106104

The product you are viewing cross references to these numbers

3 3 3

Rear Trailing Arm for Porsche 991.1 / 992.1 Carrera & Turbo 2012>>

9P150522

Product Information

Rear trailing arm. Axle guide.

oematch

Cars with standard rear axle (option code: 0N1 / 0N5)
Porsche 991.2 Carrera 2019>>
Porsche 991.2 Turbo 2020>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 21

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P150522

9P1505223B

9P1505224B

99133104303

99133104403

The product you are viewing cross references to these numbers

4 4 4 4

Track rod, Rear. Porsche 992 Carrera

992501529/1

Product Information

Track rod for rear suspension.

oematch

Fits:
Porsche 992 Carrera 2019>>
with Standard rear axle (option code: 0N1)

Click 'Zoom in' for large parts diagram,
Diagram ref no 16

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

992501529

992501529

The product you are viewing cross references to these numbers

4 4 4 4

Rear wishbone, Lower. Porsche 991.1 & 991.2

9P1505311/1

Product Information

Rear wishbone, Lower.

oematch

Fits:
Porsche 991.1 Carrera 2012-16
Porsche 991.2 Carrera 2017>>
Porsche 991 Turbo / GT2 2014>>

Porsche 992 Carrera - 2019>>
Porsche 992 turbo - 2019>>

Click 'Zoom in' for large parts diagram.
Diagram ref no 6

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505311

99133105321

9P1505311

99133105302

99133105310

The product you are viewing cross references to these numbers

4 4 4 4

Oil pipe set of 2 (supply and return) front cooler to thermostat. Porsche 964 1989-94

96420713SET

Product Information

Oil pipe set of 2 (supply and return) front cooler to thermostat.
These are long pipes running down the side of the car.

Fits:
Porsche 964 3.6L 1989-94
Porsche 964 Turbo

Diagram ref no 1 and 2

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96420713SET

96420713304

96420713301

96420713303

96420713305

96420713505

The product you are viewing cross references to these numbers

4 4 4 4

Rear wishbone, Upper. Porsche 997 / 991 / 992

9P1505397A/1

Product Information

Rear wishbone, Upper.

oematch

Fits:
Porsche 991.1 Carrera 2012-16
Porsche 991.2 Carrera 2017>>
Porsche 997 Turbo 2014>>
Porsche 991 GT3 2014-17
Porsche 991 GT3 2018>> Cars produced before 31.08.2017

Porsche 992 Turbo / Turbo S

Click 'Zoom in' for large parts diagram.
Diagram ref no 12

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9P1505397A

99133104703

9P1505397A

The product you are viewing cross references to these numbers

5 5 5 5 5

Track rod. Porsche 981 Boxster / 981C Cayman / 991

99134713101/2

Product Information

Track Rod.
OE Match track rod - also commonly referred to as a tie rod - which forms a critical link in the steering system. It connects the steering rack to the front wheel hub/knuckle, transmitting steering inputs from the rack to the wheels and helping ensure accurate, predictable directional control.
Sold each. Fits left and right side.

Fits:
Porsche 981 Boxster 2012 - 2016
Porsche 981C Cayman 2014 - 2016
Porsche 991 Carrera 2012 - 2016
Porsche 991 Turbo 2014 - 2016
Porsche 991 GT3 2014 - 2016

Diagram ref no 8

The track rod plays a vital role in steering and alignment:
• Transfers steering input from the steering rack to the wheel hub
• Maintains proper steering geometry through full suspension travel
• Helps preserve correct toe angle and stable handling
• Accommodates subtle movement with its ball joint end to allow free suspension articulation.

A properly functioning track rod ensures the car responds accurately to driver steering inputs and helps maintain straight-line stability. Worn or incorrect track rods can lead to poor steering feel, uneven tyre wear, and handling inconsistency.

Track rods (tie rods) are subject to wear due to constant steering motion, road shock, and joint loading. Over time, the inner/outer ball joint areas can develop play or looseness, which can cause:
• Steering play or vagueness
• Uneven tyre wear
• Poor alignment retention
• Reduced handling precision
• Wheel wander at speed

Replacing worn track rods with a quality OE Match component restores proper steering linkage integrity, aligns geometry correctly, and helps preserve consistent handling and tyre life.

When to replace. Replace the front track rod if:
• You experience steering looseness, wandering, or play
• There is uneven or rapid tyre wear
• Alignment cannot be held within tolerance
• You hear clunking or knocking from the front suspension under steering load
• During front suspension overhaul or steering rack removal

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99134713101

99134713100

99134713101

The product you are viewing cross references to these numbers

DISPLAYING 2481 to 2496 (of 7517 products)

<< 155 156 157 158 >>

Enter your VAT number here and click Verify:

OE Match

OE Match