OE Match

Brake master cylinder reservoir feeder line.
This pipe fits into the top of the master cylinder and allows a rubber hose to connect from the reservoir down to the master cylinder. 

Fits:
Porsche 911 / 912 1965 - 1967
Porsche 911 1968 - 1977 *RHD cars only
Porsche 930 Turbo 1975 - 1977 *RHD cars only

Fits to number 11 on diagram.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90135564400

The product you are viewing cross references to these numbers

ACF hose 4mm ID, 6mm OD, Clear.
Sold in lengths of 30cm.

Fits:
Porsche 911 1965-1973
Porsche 912 1965–1969

Diagram ref no 10

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99918120440

The product you are viewing cross references to these numbers

Speed nut M6. 
Sold each - Used in various locations



Fits:

Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 958 Cayenne - 2010 to 2017
Porsche 971 Panamera - 2017 to 2023
Porsche 9J1 Taycan - 2020 to 2024

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

N90168604

The product you are viewing cross references to these numbers

This is a brand new Set of Main Bearings for Porsche 356C / 912 available in most common Porsche sizes, Some sizes also available with plus 1mm Thrust to make it easier to save an old case with a wore out trust.
STD Case size

Engine: Porsche 356C and 912

Sizes available: in "MM"

STD Case / STD Crank
STD Case / 0.25mm Crank
STD Case / 0.50mm Crank

Please Pick size when ordering.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

616100138

The product you are viewing cross references to these numbers

This is a brand new Set of Main Bearings for Porsche 356C / 912 available in most common Porsche sizes, Some sizes also available with plus 1mm Thrust to make it easier to save an old case with a wore out trust
Oversize: 0.25mm Case



Engine: Porsche 356C and 912

Sizes available: in "MM"

0.25mm Case / STD Crank
0.25mm Case / STD Crank / Thrust +1mm
0.25mm Case / 0.25mm Crank
0.25mm Case / 0.25mm Crank / Thrust +1mm
0.25mm Case / 0.50mm Crank


Please Pick size when ordering below:

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

616100138

The product you are viewing cross references to these numbers

Push button selector knob - aluminium

Fits:
Porsche 964 - 1989 to 1994 (Tiptronic)
Porsche 993 - 1994 to 1998 (Tiptronic)
Porsche 968 - 1992 to 1995 (Tiptronic)

The push button replaces the original Porsche plastic one.
The knob with it's different finishes in polished, clear anodized and black anodized is the optimal addition to our dashboard trim kits.

Click 'Zoom in' for large parts diagram.
Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

943426275

The product you are viewing cross references to these numbers

Rear view mirror. Chrome - Singer Style.
Fits RHD or LHD cars.

Fits:
Porsche 911 -1978 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998
Porsche 924S - 1986 to 1988
Porsche 928 - 1992 to 1995
Porsche 944 - 1985 to 1991
Porsche 968 - 1992 to 1995

Rear view mirror in "Singer Style" with anti-dazzle function

Chrome-plated old school mirror ( 911 style 1965-1967) equipped with a specially made aluminum adapter for mounting it on the original windshield mirror base.

The mirror itself has a chrome-plated housing. The adapter is made of polished aluminum.

Please Note: 
you must use your existing mirror base on the windshield. This is not included.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

4778575110001C

The product you are viewing cross references to these numbers

Handbrake handle set aluminium. 

clear

Fits:
Porsche 911 - 1965 to 1989

The handbrake handle, the knob and the cover are made of solid aluminum and are available in polished, clear anodised and black anodised.
These are a great addition to our to our  "Singer Style" dashboard trim kits.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

901424521

The product you are viewing cross references to these numbers

Handbrake handle set aluminium. 



Fits:
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1997

The handbrake handle, the knob and the cover are made of solid aluminum and are available in polished, clear anodised and black anodised.
These are a great addition to our to our  "Singer Style" dashboard trim kits.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

965424523

The product you are viewing cross references to these numbers

Window switch surround Aluminium.
Sold as a set of 3.

Fits:
Porsche 911 - 1974 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1998

Window Regulator Switch Trim Set for Porsche 911/964
Enhance your Porsche 911/964 interior with this premium window regulator switch trim set, designed for a sleek and refined look.

Set Includes:

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964613621

The product you are viewing cross references to these numbers

Dash trim kit Singer Style with without heater/AC and radio slot - LHD (Left Hand Drive)



Fits:
Porsche 964 - 1989 to 1994

"Singer Style" backdate dash trim conversion kit without heater control and radio cut-out slot

This kit includes a two piece "Singer-look" dashboard trim strip that replaces the stock foam trim on the front of the dashboard. The dash trim is CNC machined from solid aluminum and profiled, which means that any covering material (e.g. leather, upholstery, etc.) can be inserted/retracted.

Also included in the kit is an ignition switch bezel, which is required for installation as it is smaller compared to the cover fitted as the factory standard.

There is a profiled frame in the climate control area that surrounds the climate control panel and brings back the look of the classic F models.

For the standard version, this trim set is available with a slot for classic or DIN radios.
For individual interior design options, a variant without a cut-out for the climate control panel or also without a radio cutout for individual customer design is also available.

Assembly instructions
As with the "964 Singer Porsche", there is no recess for the headlight level control; instead, there is a hole for a hazard warning light switch between the light switch and the ignition switch (this may need to be individually adapted to your car). But this is possible with low effort.

This trim is designed for use without a passenger airbag. If there is a glove box, it must either be closed or the dash strip must be split and adjusted. If the vehicle has a passenger airbag and this should be retained, the strip ends around the airbag must be individually shortened and adapted to the dashboard in this area. This is also possible without any problems.

Surface finishing and optional accessories
The dashboard strip, the ignition switch bezel and all interior accessories are available in three surface finishes: polished, clear anodised and black anodised.

Click 'Zoom in' for large parts diagram.
Diagram ref no 30, 31, 32 and 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964552482

The product you are viewing cross references to these numbers

Dash trim kit Singer Style with without radio slot - LHD (Left Hand Drive)



Fits:
Porsche 964 - 1989 to 1994

"Singer Style" backdate dash trim conversion kit with heater control cut-out and without radio slot

This kit includes a two piece "Singer-look" dashboard trim strip that replaces the stock foam trim on the front of the dashboard. The dash trim is CNC machined from solid aluminum and profiled, which means that any covering material (e.g. leather, upholstery, etc.) can be inserted/retracted.

Also included in the kit is an ignition switch bezel, which is required for installation as it is smaller compared to the cover fitted as the factory standard.

There is a profiled frame in the climate control area that surrounds the climate control panel and brings back the look of the classic F models.

For the standard version, this trim set is available with a slot for classic or DIN radios.
For individual interior design options, a variant without a cut-out for the climate control panel or also without a radio cutout for individual customer design is also available.

Assembly instructions
As with the "964 Singer Porsche", there is no recess for the headlight level control; instead, there is a hole for a hazard warning light switch between the light switch and the ignition switch (this may need to be individually adapted to your car). But this is possible with low effort.

This trim is designed for use without a passenger airbag. If there is a glove box, it must either be closed or the dash strip must be split and adjusted. If the vehicle has a passenger airbag and this should be retained, the strip ends around the airbag must be individually shortened and adapted to the dashboard in this area. This is also possible without any problems.

Surface finishing and optional accessories
The dashboard strip, the ignition switch bezel and all interior accessories are available in three surface finishes: polished, clear anodised and black anodised.

Click 'Zoom in' for large parts diagram.
Diagram ref no 30, 31, 32 and 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964552481

The product you are viewing cross references to these numbers

Dash Trim Kit Singer Style With DIN Radio Slot - LHD (Left Hand Drive)

Fits:
Porsche 964 1989>>1994

"Singer Style" backdate dash trim conversion kit with DIN radio and heater control cut-outs

This kit includes a two piece "Singer-look" dashboard trim strip that replaces the stock foam trim on the front of the dashboard. The dash trim is CNC machined from solid aluminum and profiled, which means that any covering material (e.g. leather, upholstery, etc.) can be inserted/retracted.

Also included in the kit is an ignition switch bezel, which is required for installation as it is smaller compared to the cover fitted as the factory standard.

There is a profiled frame in the climate control area that surrounds the climate control panel and brings back the look of the classic F models.

For the standard version, this trim set is available with a slot for classic or DIN radios.
For individual interior design options, a variant without a cut-out for the climate control panel or also without a radio cutout for individual customer design is also available.

Assembly instructions
As with the "964 Singer Porsche", there is no recess for the headlight level control; instead, there is a hole for a hazard warning light switch between the light switch and the ignition switch (this may need to be individually adapted to your car). But this is possible with low effort.

This trim is designed for use without a passenger airbag. If there is a glove box, it must either be closed or the dash strip must be split and adjusted. If the vehicle has a passenger airbag and this should be retained, the strip ends around the airbag must be individually shortened and adapted to the dashboard in this area. This is also possible without any problems.

Surface finishing and optional accessories
The dashboard strip, the ignition switch bezel and all interior accessories are available in three surface finishes: polished, clear anodised and black anodised.

Diagram Ref No 30, 31, 32 And 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964552480

The product you are viewing cross references to these numbers

Dash trim kit Singer Style with classic radio slot - LHD (Left Hand Drive)



Fits:
Porsche 964 - 1989 to 1994

"Singer Style" backdate dash trim conversion kit with classic radio and heater control cut-outs

This kit includes a two piece "Singer-look" dashboard trim strip that replaces the stock foam trim on the front of the dashboard. The dash trim is CNC machined from solid aluminum and profiled, which means that any covering material (e.g. leather, upholstery, etc.) can be inserted/retracted.

Also included in the kit is an ignition switch bezel, which is required for installation as it is smaller compared to the cover fitted as the factory standard.

There is a profiled frame in the climate control area that surrounds the climate control panel and brings back the look of the classic F models.

For the standard version, this trim set is available with a slot for classic or DIN radios.
For individual interior design options, a variant without a cut-out for the climate control panel or also without a radio cutout for individual customer design is also available.

Assembly instructions
As with the "964 Singer Porsche", there is no recess for the headlight level control; instead, there is a hole for a hazard warning light switch between the light switch and the ignition switch (this may need to be individually adapted to your car). But this is possible with low effort.

This trim is designed for use without a passenger airbag. If there is a glove box, it must either be closed or the dash strip must be split and adjusted. If the vehicle has a passenger airbag and this should be retained, the strip ends around the airbag must be individually shortened and adapted to the dashboard in this area. This is also possible without any problems.

Surface finishing and optional accessories
The dashboard strip, the ignition switch bezel and all interior accessories are available in three surface finishes: polished, clear anodised and black anodised.

Click 'Zoom in' for large parts diagram.
Diagram ref no 30, 31, 32 and 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

964552479

The product you are viewing cross references to these numbers

Dash trim kit Singer Style 4 piece - LHD (Left Hand Drive)
For cars with a glovebox



Fits:
Porsche 911 - 1986 to 1989

"Singer Style" backdate dash trim conversion kit 

This kit includes a four piece "Singer-look" dashboard trim strip that replaces the stock foam trim on the front of the dashboard. The dash trim is CNC machined from solid aluminum and profiled, which means that any covering material (e.g. leather, upholstery, etc.) can be inserted/retracted.

The four-piece version is for cars with a glovebox.

Also included in the kit is an ignition lock cover ring, which is required for installation as it is smaller compared to the cover fitted as the factory Standard.

This trim set has pre-milled slots for classic or DIN radios and for the early and late climate control panel. Depending on requirements, the small dividers must be removed by the customer. For individual interior design options, the cutout for the climate control panel or the radio cutout can simply be left closed.

Surface finishing and optional accessories
The dashboard strip and the ignition lock ring are available in three surface finishes: polished, clear anodised and black anodised.

Click 'Zoom in' for large parts diagram.
Diagram ref no 30, 31, 32 and 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911552480

The product you are viewing cross references to these numbers

Dash trim kit Singer Style 2 piece - LHD (Left Hand Drive)
For cars without a glovebox



Fits:
Porsche 911 - 1986 to 1989

"Singer Style" backdate dash trim conversion kit 

This kit includes a two piece "Singer-look" dashboard trim strip that replaces the stock foam trim on the front of the dashboard. The dash trim is CNC machined from solid aluminum and profiled, which means that any covering material (e.g. leather, upholstery, etc.) can be inserted/retracted.

The two-piece version is for cars without a glovebox.

Also included in the kit is an ignition lock cover ring, which is required for installation as it is smaller compared to the cover fitted as the factory Standard.

This trim set has pre-milled slots for classic or DIN radios and for the early and late climate control panel. Depending on requirements, the small dividers must be removed by the customer. For individual interior design options, the cutout for the climate control panel or the radio cutout can simply be left closed.

Surface finishing and optional accessories
The dashboard strip and the ignition lock ring are available in three surface finishes: polished, clear anodised and black anodised.

Click 'Zoom in' for large parts diagram.
Diagram ref no 30, 31, 32 and 33

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

911552479

The product you are viewing cross references to these numbers