KW

KW Variant 1 Height Adjustable kit. 



Fits:
Porsche 997 C2 / C2S Coupé / Cabrio 07/2004 - 2012
Cars WITHOUT PASM

KW Variant 1 "inox-line"

Sporty handling combined with outstanding looks. With factory pre-configured damping.
The KW coilover kit Variant 1 "inox-line" is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.

Continuous lowering
With the KW coilover Variant 1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans
KW coilover Variant 1 "inox-line" satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 "inox-line", rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

Trust In Our Experience
We are the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers "Made in Germany". Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Of course, we give as a German manufacturer a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty will increase up to 5 years when the kit has been installed at one of our KW specialist dealers.

- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Stainless steel technology "inox-line"
- Individually height adjustable
- tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling

Setup - Factory pre-configured damping setup
The KW coilover Variant 1 "inox-line" has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.

Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW Variant 1 "inox-line".


This product is a special order item allow 24 working days - 8 weeks for delivery.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

10271015

The product you are viewing cross references to these numbers

KW Dynamic Damping Control (DDC) with ECU Coilover Kit



Fits:
Porsche 958 Cayenne V6 3.6ltr Petrol without PASM
Porsche 958 Cayenne V6 3.0ltr Diesel without PASM
Porsche 958 Cayenne S V8 4.8ltr Petrol without PASM
Porsche 958 Cayenne S V8 4.2ltr Diesel without PASM

Individuality by the push of a button

Lowers car by 35mm to 70mm

The KW DDC coilovers are part of the KW iSuspension program - the intelligent suspension solution. They combine the advantages of an adaptive damping system with a vehicle-specific aftermarket suspension solution.

The adaptive KW DDC ECU coilovers allow adjustment within the tested lowering range. The dirt-resistant trapezoid thread and the composite collar allow years of accessible adjustability and ease of use. Lowering can be done via the composite spring collar on the shock body or on the height adjustable rear perch in the rear of the vehicle. No matter where in the world, sporty drivers, car manufacturers and refiners rely on our KW technology "Made in Germany".

Each KW coilover kit is produced at our headquarter located in Fichtenberg, Germany. During the production process each kit is subjected to extensive stress tests and must meet the high quality standards set by KW management and surpass OEM quality. Over 4600 applications come supported with a multi-year warranty. A 5 year warranty is provided when the kit is installed at one of KW's specialist dealers. Currently KW DDC ECU coilovers with App-control are available for Audi, BMW, Mercedes-Benz, Porsche, Volkswagen and Range Rover Evoque.

• Retrofit electronic damper adjustment, combined with the advantages of a KW coilover kit
• Optional App-control
• Three damping setups: Comfort / Sport / Sport+
• Operated by retrofit button or optional App
• Create personalized setups with the KW DDC App

KW DDC button - 1 x button, 3 x more experience

The contents of delivery of the KW DDC ECU coilover kit includes: a "KW DDC multi-selection button". This button allows the user to select between the different KW DDC driving modes "Comfort", "Sport" and "Sport+" directly from the cockpit. Here the KW DDC button changes the colour matching the KW DDC App.

W-LAN Module & App Control
Optional App control for real time suspension adjustment via iPhone, iPod touch or iPad

Experience the latest technology "Made in Germany": the KW DDC (Dynamic Damping Control) coilovers with ECU (Electronic Control Unit). The coilovers with its electronically controlled dampers enable an intelligent suspension setup via App-control. Currently available for numerous vehicles without factory adaptive suspension.

This allows you to upgrade your car with an adaptive damper control and to have the option to adjust via the KW DDC App to suit your driving style. You do not need any tools or to physically adjust the dampers.

The free KW DDC KW App in combination with our optional W-LAN module will allow you to customize your own damper setup instantaneously.

For cars which have electronic dampers (PASM) make sure it is shut down. Specific electronic damper shut-downs are available from KW. Please check our accessories list

Installation instruction
Installation instruction

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

39071003

The product you are viewing cross references to these numbers

KW Dynamic Damping Control (DDC) with ECU Coilover Kit



Fits:
Porsche 991.1 Carrera 2 / Carrera 2S with PDDC
Porsche 991.1 Carrera 4 / Carrera 4S with PDDC
For Coupe, Cabriolet and Targa

Individuality by the push of a button

Lowers car by 25mm to 50mm

The KW DDC coilovers are part of the KW iSuspension program - the intelligent suspension solution. They combine the advantages of an adaptive damping system with a vehicle-specific aftermarket suspension solution.

The adaptive KW DDC ECU coilovers allow adjustment within the tested lowering range. The dirt-resistant trapezoid thread and the composite collar allow years of accessible adjustability and ease of use. Lowering can be done via the composite spring collar on the shock body or on the height adjustable rear perch in the rear of the vehicle. No matter where in the world, sporty drivers, car manufacturers and refiners rely on our KW technology "Made in Germany".

Each KW coilover kit is produced at our headquarter located in Fichtenberg, Germany. During the production process each kit is subjected to extensive stress tests and must meet the high quality standards set by KW management and surpass OEM quality. Over 4600 applications come supported with a multi-year warranty. A 5 year warranty is provided when the kit is installed at one of KW's specialist dealers. Currently KW DDC ECU coilovers with App-control are available for Audi, BMW, Mercedes-Benz, Porsche, Volkswagen and Range Rover Evoque.

• Retrofit electronic damper adjustment, combined with the advantages of a KW coilover kit
• Optional App-control
• Three damping setups: Comfort / Sport / Sport+
• Operated by retrofit button or optional App
• Create personalized setups with the KW DDC App

KW DDC button - 1 x button, 3 x more experience

The contents of delivery of the KW DDC ECU coilover kit includes: a "KW DDC multi-selection button". This button allows the user to select between the different KW DDC driving modes "Comfort", "Sport" and "Sport+" directly from the cockpit. Here the KW DDC button changes the colour matching the KW DDC App.

W-LAN Module & App Control
Optional App control for real time suspension adjustment via iPhone, iPod touch or iPad

Experience the latest technology "Made in Germany": the KW DDC (Dynamic Damping Control) coilovers with ECU (Electronic Control Unit). The coilovers with its electronically controlled dampers enable an intelligent suspension setup via App-control. Currently available for numerous vehicles without factory adaptive suspension.

This allows you to upgrade your car with an adaptive damper control and to have the option to adjust via the KW DDC App to suit your driving style. You do not need any tools or to physically adjust the dampers.

The free KW DDC KW App in combination with our optional W-LAN module will allow you to customize your own damper setup instantaneously.

For cars which have electronic dampers (PASM) make sure it is shut down. Specific electronic damper shut-downs are available from KW. Please check our accessories list.

Installation instruction
Installation instruction

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

39071004

The product you are viewing cross references to these numbers

KW Dynamic Damping Control (DDC) with ECU Coilover Kit



Fits:
Porsche 991.1 Carrera 2 / Carrera 2S without PDDC
Porsche 991.1 Carrera 4 / Carrera 4S with and without PDDC
Porsche 991.2 Carrera 2 / Carrera 2S with and without PDDC
Porsche 991.2 Carrera 4 / Carrera 4S with and without PDDC
For Coupe, Cabriolet and Targa

On 991.2 NOT for cars with M474 Front-axle lift function

Individuality by the push of a button

Lowers car by 25mm to 50mm

The KW DDC coilovers are part of the KW iSuspension program - the intelligent suspension solution. They combine the advantages of an adaptive damping system with a vehicle-specific aftermarket suspension solution.

The adaptive KW DDC ECU coilovers allow adjustment within the tested lowering range. The dirt-resistant trapezoid thread and the composite collar allow years of accessible adjustability and ease of use. Lowering can be done via the composite spring collar on the shock body or on the height adjustable rear perch in the rear of the vehicle. No matter where in the world, sporty drivers, car manufacturers and refiners rely on our KW technology "Made in Germany".

Each KW coilover kit is produced at our headquarter located in Fichtenberg, Germany. During the production process each kit is subjected to extensive stress tests and must meet the high quality standards set by KW management and surpass OEM quality. Over 4600 applications come supported with a multi-year warranty. A 5 year warranty is provided when the kit is installed at one of KW's specialist dealers. Currently KW DDC ECU coilovers with App-control are available for Audi, BMW, Mercedes-Benz, Porsche, Volkswagen and Range Rover Evoque.

• Retrofit electronic damper adjustment, combined with the advantages of a KW coilover kit
• Optional App-control
• Three damping setups: Comfort / Sport / Sport+
• Operated by retrofit button or optional App
• Create personalized setups with the KW DDC App

KW DDC button - 1 x button, 3 x more experience

The contents of delivery of the KW DDC ECU coilover kit includes: a "KW DDC multi-selection button". This button allows the user to select between the different KW DDC driving modes "Comfort", "Sport" and "Sport+" directly from the cockpit. Here the KW DDC button changes the colour matching the KW DDC App.

W-LAN Module & App Control
Optional App control for real time suspension adjustment via iPhone, iPod touch or iPad

Experience the latest technology "Made in Germany": the KW DDC (Dynamic Damping Control) coilovers with ECU (Electronic Control Unit). The coilovers with its electronically controlled dampers enable an intelligent suspension setup via App-control. Currently available for numerous vehicles without factory adaptive suspension.

This allows you to upgrade your car with an adaptive damper control and to have the option to adjust via the KW DDC App to suit your driving style. You do not need any tools or to physically adjust the dampers.

The free KW DDC KW App in combination with our optional W-LAN module will allow you to customize your own damper setup instantaneously.

For cars which have electronic dampers (PASM) make sure it is shut down. Specific electronic damper shut-downs are available from KW. Please check our accessories list

Installation instruction
Installation instruction

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

39071002

The product you are viewing cross references to these numbers

KW Dynamic Damping Control (DDC) with ECU Coilover Kit



Fits:
Porsche 997 Carrera 2 / Carrera 2S with and without PASM
Coupe Only

Individuality by the push of a button

Lowers car by 20mm to 45mm

The KW DDC coilovers are part of the KW iSuspension program - the intelligent suspension solution. They combine the advantages of an adaptive damping system with a vehicle-specific aftermarket suspension solution.

The adaptive KW DDC ECU coilovers allow adjustment within the tested lowering range. The dirt-resistant trapezoid thread and the composite collar allow years of accessible adjustability and ease of use. Lowering can be done via the composite spring collar on the shock body or on the height adjustable rear perch in the rear of the vehicle. No matter where in the world, sporty drivers, car manufacturers and refiners rely on our KW technology "Made in Germany".

Each KW coilover kit is produced at our headquarter located in Fichtenberg, Germany. During the production process each kit is subjected to extensive stress tests and must meet the high quality standards set by KW management and surpass OEM quality. Over 4600 applications come supported with a multi-year warranty. A 5 year warranty is provided when the kit is installed at one of KW's specialist dealers. Currently KW DDC ECU coilovers with App-control are available for Audi, BMW, Mercedes-Benz, Porsche, Volkswagen and Range Rover Evoque.

• Retrofit electronic damper adjustment, combined with the advantages of a KW coilover kit
• Optional App-control
• Three damping setups: Comfort / Sport / Sport+
• Operated by retrofit button or optional App
• Create personalized setups with the KW DDC App

KW DDC button - 1 x button, 3 x more experience

The contents of delivery of the KW DDC ECU coilover kit includes: a "KW DDC multi-selection button". This button allows the user to select between the different KW DDC driving modes "Comfort", "Sport" and "Sport+" directly from the cockpit. Here the KW DDC button changes the colour matching the KW DDC App.

W-LAN Module & App Control
Optional App control for real time suspension adjustment via iPhone, iPod touch or iPad

Experience the latest technology "Made in Germany": the KW DDC (Dynamic Damping Control) coilovers with ECU (Electronic Control Unit). The coilovers with its electronically controlled dampers enable an intelligent suspension setup via App-control. Currently available for numerous vehicles without factory adaptive suspension.

This allows you to upgrade your car with an adaptive damper control and to have the option to adjust via the KW DDC App to suit your driving style. You do not need any tools or to physically adjust the dampers.

The free KW DDC KW App in combination with our optional W-LAN module will allow you to customize your own damper setup instantaneously.

For cars which have electronic dampers (PASM) make sure it is shut down. Specific electronic damper shut-downs are available from KW. Please check our accessories list

Installation instruction
Installation instruction

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

39071001

The product you are viewing cross references to these numbers

PASM Cancel kit.



987 Cayman

Also usable for suspensions made by other manufacturers and OE aftermarket suspensions

Cancellers avoid ECU failure when suspension is upgraded to KW suspensions

Only factory damper signal is cancelled which results in prevention of error signal

Electronic control unit remains fully functional

For Installation Instructions please CLICK HERE

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

68510148

The product you are viewing cross references to these numbers

PASM Cancel kit.



Porsche 992 GT3

Also usable for suspensions made by other manufacturers and OE aftermarket suspensions

Cancelers avoid ECU failure when suspension is upgraded to KW suspensions

Only factory damper signal is cancelled which results in prevention of error signal

Electronic control unit remains fully functional

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

68511202

The product you are viewing cross references to these numbers

PASM Cancel kit.



Porsche 991.1 GT3 / GT3 RS
Porsche 991.2 GT3 / GT3 RS
Porsche 981 Cayman GT4

Also usable for suspensions made by other manufacturers and OE aftermarket suspensions

Cancellers avoid ECU failure when suspension is upgraded to KW suspensions

Only factory damper signal is cancelled which results in prevention of error signal

Electronic control unit remains fully functional

For Installation Instructions please CLICK HERE

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

68510411

The product you are viewing cross references to these numbers

PASM Cancel kit.



Porsche 955 Cayenne
Porsche 957 Cayenne
Porsche 95B Macan

Also usable for suspensions made by other manufacturers and OE aftermarket suspensions

Cancellers avoid ECU failure when suspension is upgraded to KW suspensions

Only factory damper signal is cancelled which results in prevention of error signal

Electronic control unit remains fully functional

For Installation Instructions please CLICK HERE

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

68510365

The product you are viewing cross references to these numbers

PASM Cancel kit.



718 Cayman GT4

Also usable for suspensions made by other manufacturers and OE aftermarket suspensions

Cancellers avoid ECU failure when suspension is upgraded to KW suspensions

Only factory damper signal is cancelled which results in prevention of error signal

Electronic control unit remains fully functional

For Installation Instructions please CLICK HERE

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

68511186

The product you are viewing cross references to these numbers

KW Variant 1 Height Adjustable kit



Fits:
Porsche 997 C2 / C2S Cabriolet 07/2004>>
Cars WITH PASM Porsche Active Suspension Management System

KW Variant 1 "inox-line"

Sporty handling combined with outstanding looks. With factory pre-configured damping.
The KW coilover kit Variant 1 "inox-line" is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.

Continuous lowering
With the KW coilover Variant 1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans
KW coilover Variant 1 "inox-line" satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 "inox-line", rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

Trust In Our Experience
We are the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers "Made in Germany". Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Of course, we give as a German manufacturer a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty will increase up to 5 years when the kit has been installed at one of our KW specialist dealers.

- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Stainless steel technology "inox-line"
- Individually height adjustable
- tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling

Setup - Factory pre-configured damping setup
The KW coilover Variant 1 "inox-line" has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.

Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW Variant 1 "inox-line".


This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

10271038

The product you are viewing cross references to these numbers

PASM Cancel kit.

Cabriolet Only

Also usable for suspensions made by other manufacturers and OE aftermarket suspensions

Cancellers avoid ECU failure when suspension is upgraded to KW suspensions

Only factory damper signal is cancelled which results in prevention of error signal

Electronic control unit remains fully functional

For Installation Instructions please CLICK HERE

This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

68510165

The product you are viewing cross references to these numbers

HLS conversion kit for cars with OEM Suspension.



Fits
Porsche 991 (911) Turbo, Turbo S; Coupé + Cabrio; only left hand drive with PDCC

KW HLS (Hydraulic Lift System) helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.

Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered

• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

This product is a special order item allow 24 working days - 8 weeks for delivery.

Estimated Labour time to fit this kit is 8-10hrs. Depends on spec of the car and other conditions

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19271651

The product you are viewing cross references to these numbers

HLS conversion kit for cars with OEM Suspension.



Fits
Porsche 991 (911) Carrera 2/2S/GTS, Carrera 4/4S/GTS, Targa 4/4S; coupé + convertible; only right hand drive without PDCC 12/2015>>

Porsche 991 (911) Carrera 2/2S, Carrera 4/4S, Targa 4/4S; facelift; coupé + convertible; only right hand drive with + without PDCC
12/2015>>

KW HLS (Hydraulic Lift System) helping sport cars avoid road clearance difficulties
Raises the vehicle up to 45 mm

The HLS provides additional road clearance for lowered vehicles. When expanded, a range of 30mm to 45mm of lift is produced, thereby helping sport cars avoid road clearance difficulties like speed bumps, road constructions etc.

Version HLS 2
HLS 2 which enables only the FRONT axles to be lifted and lowered

• For vehicles with with little road clearance
• Vehicle specific applications
• Activation of change in height by a small keychain transmitter avoiding the need to run additional wires through the vehicle
• Height changes can be done while the vehicle is moving, up to speeds of 80 km/h (50 mph)
• Automatically lowering of the vehicle
• With TÜV certificate
• Rubber bellows protect hydraulic cylinder, thereby providing long term durability.

This product is a special order item allow 24 working days - 8 weeks for delivery.

Estimated Labour time to fit this kit is 8-10hrs. Depends on spec of the car and other conditions

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

19271652

The product you are viewing cross references to these numbers

KW Variant 1 Height Adjustable kit



Fits:
Porsche 997 C2 / C2S Coupé 07/2004 - 2012
Cars WITH PASM Porsche Active Suspension Management System

KW Variant 1 "inox-line"

Sporty handling combined with outstanding looks. With factory pre-configured damping.
The KW coilover kit Variant 1 "inox-line" is our entry model for more driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.

Continuous lowering
With the KW coilover Variant 1 you can achieve maximum lowering in the tested adjustment range. Depending on vehicle model this varies between 30 to 70mm or 50 to 90mm. Even after years you can adjust the height quickly and easily due to the dirt resistant trapezoid thread and composite collar. Lowering at the front axle is made using our one piece composite height adjuster, on the rear axle this is the same unless the car has a seperate spring and shock absorber. The supplied rear height adjuster sits either above or below the rear spring.

The benchmark for tuning fans
KW coilover Variant 1 "inox-line" satisfies the sporty driver with its harmonic basic setup. Our engineers develop for each vehicle a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you don't buy any coilover, but a KW coilover which has been developed specifically for your type of vehicle. KW as a manufacturer uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 "inox-line", rolling motions of the body will be reduced during compression and you benefit from genuine directness and sportier handling while driving.

Trust In Our Experience
We are the market leader and innovator of individual suspension solutions for road and racetrack for more than 15 years. No matter where in the world, car driver, automotive manufacturers and tuners rely on our KW coilovers "Made in Germany". Each KW coilover kit, developed and manufactured in the Swabian town Fichtenberg, is subject to extensive stress tests during production to meet the high standards of our KW quality management. Of course, we give as a German manufacturer a 2-year warranty on our more than 4600 applications suspension solutions, which exceed OEM quality. The warranty will increase up to 5 years when the kit has been installed at one of our KW specialist dealers.

- Optimally pre-adjusted
- Sporty and comfortable dampening technology
- Stainless steel technology "inox-line"
- Individually height adjustable
- tested adjustment range
- Ready to install complete solution
- High quality components for a long durability
- Complete documentation for easy handling

Setup - Factory pre-configured damping setup
The KW coilover Variant 1 "inox-line" has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly, so that you will experience an optimized balance of sportiness and comfort while driving.

Even with full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus are "Show & Shine" events are interested in the KW Variant 1 "inox-line".


This product is a special order item allow 24 working days - 8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

10271031

The product you are viewing cross references to these numbers

KW Coilover Kit V2 Porsche Model 356 adjustable Dampers



Fits:
Porsche 356 / 356A / 356B / 356C 09/1947-03/1968

KW Variant 2: Sporty and personalized with adjustable rebound dampening.

This system is designed for the driver who requires not only determining the individual lowering of their vehicle, but having the ability to adjust the damper settings to fine tune the system to their needs.
The adjustable rebound damper allows adjustment of the pitch and roll of the vehicle adapting it to one's own driving preferences.


This product is a special order item allow 24 working days -8 weeks for delivery.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

15271072

The product you are viewing cross references to these numbers