Kits

Brake disc rotor, Front. SET OF 2




Porsche 997 C2 3.6L MKII 2009>> FRONT
Porsche 997 C4 3.6L MKII 2009>> FRONT
Porsche 991 C2 3.4L FRONT
Porsche 991 C4 3.4L FRONT
Porsche 981 Boxster S 3.4L 2012>> FRONT
Porsche 981C Cayman S 3.4L 2013>> FRONT
Porsche 718 (982) Boxster 2.0L 2017>> FRONT
Porsche 718C (982C) Cayman 2.0L 2017>> FRONT

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99735140102SKIT

The product you are viewing cross references to these numbers

Brake disc rotor, REAR. SET OF 2




Porsche 991 3.4L REAR

Brake Disc Type Vented
Fitting Position Rear Axle
Diameter [mm] 330 mm
Surface Coated
Hub Bore Ø [mm] 98 mm
Height [mm] 75 mm
Thickness [mm] 28 mm

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99135240102KIT

The product you are viewing cross references to these numbers

Water pump belt & pully kit.

Fits:
Porsche 928 S4 5.0L
Porsche 928 GTS 5.4L

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

WATERPUMP.928S4.GEB

The product you are viewing cross references to these numbers

Drop link bush, rear top.
SET OF 2

Fits:
Porsche 911 1965-69
Porsche 911 1970-73
Porsche 911 1974-77
Porsche 930 1975-77

Diagram Ref No. 15

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134378200

The product you are viewing cross references to these numbers

Shock Absorber Supporting mount complete with Front bearing 99634351505.
SET OF 2

Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster MKI & MKII 2005>>
Porsche 987C Cayman MKI & MKII 2005>>
Porsche 996 C2 1998-05 (without sport suspension)
Porsche 997 MKI C2 / C2S 2005-08
Porsche 997 MKII C2 / C2S 2009-12

Diagram ref no 3

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99734301801

The product you are viewing cross references to these numbers

Shock Absorber Supporting mount complete with Front bearing 99634351505. SET OF 2



Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster MKI & MKII 2005>>
Porsche 987C Cayman MKI & MKII 2005>>
Porsche 996 C2 1998-05 (without sport suspension)
Porsche 997 MKI C2 / C2S 2005-08
Porsche 997 MKII C2 / C2S 2009-12

Click 'Zoom in' for large parts diagram.
Diagram ref no 3 & 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99734301801

The product you are viewing cross references to these numbers

Ignition coil pack. SET OF 6



Fits:
Porsche 955 Cayenne MKI V6 3.2L
Porsche 957 Cayenne MKII V6 3.6L

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95560210105

The product you are viewing cross references to these numbers

High grade brake disc. SET OF 2




Porsche 997 C2 3.6L MKII 2009>> FRONT
Porsche 997 C4 3.6L MKII 2009>> FRONT
Porsche 991 C2 3.4L FRONT
Porsche 991 C4 3.4L FRONT
Porsche 981 Boxster S 3.4L 2012>> FRONT
Porsche 981C Cayman S 3.4L 2013>> FRONT
Porsche 718 (982) Boxster 2.0L 2017>> FRONT
Porsche 718C (982C) Cayman 2.0L 2017>> FRONT

Brake disc rotors are price each.

Find out about Textar product verification here

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99735140102KIT

The product you are viewing cross references to these numbers

Track rod end. SET OF 2.



Fits:
Porsche 911 TURBO (930) 3.0L / 3.3L 1975-89

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93034732200

The product you are viewing cross references to these numbers

Front air duct with position light set.

Fits:
Porsche 993 1994-97

Note
Does not come with bulbs - Order separately
2 Required per car

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94463190500

The product you are viewing cross references to these numbers

BILSTEIN B6 Sports shock absorber. SET OF 2



Fits:
Porsche 356 1955-1948
Porsche 356A 1959-1955
Porsche 356B 1963-1960
Porsche 356C 1965-1964
Porsche 356SC 1965-1964


The shock absorber for those drivers who prefer a sports suspension but are not particularly interested in lowering the body. Also available in special design complete with reservoir for off-road vehicles.
No risk, more fun
For some people it's important to show what they have, for others it's sufficient to know that they have it. The theme of the discussion here is the sports suspension. The BILSTEIN B6 Sports shock absorber is the ideal solution for drivers revelling in the understatement . The wolf in sheep's clothing snarls, when necessary, but otherwise goes reliably about its work in daily traffic with no lowering of the body whatsoever.

Optimum road holding, enhanced tracking stabilisation and excellent damping force: the BILSTEIN B6 Sports is not only first choice as far as sports tuning is concerned but also in the sphere of safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

24-599962KIT

The product you are viewing cross references to these numbers

Chain guide rail set.
This set is for total timing chain system renewal on Porsche 911/914/964 flat-six engines. It includes one brown-type guide rail (part number 91110522205) plus five black-type guide rails (part number 91110522207) - the exact quantities required for a complete timing-train overhaul. Each rail is manufactured to match Porsche’s original specification in material, geometry and wear profile.

SET OF 6, includes:
1 × Guide Rail Brown – part no. 91110522205
5 × Guide Rails Black – part no. 91110522207

Fits:
Porsche 911 1966 - 1989

Diagram ref no 2

• Function: Ensures proper timing-chain alignment, guides chain over sprockets and tensioners, controls chain path geometry, minimises vibration/noise and extends chain & sprocket life.

Over time, guide rails degrade through wear, cracking, distortion or mis-alignment. If any single guide rail is worn or old, you risk chain vibration or changing chain geometry - potentially causing chain noise, accelerated wear of sprockets, timing drift or even catastrophic failure. By replacing all six guide rails (1 brown + 5 black) as a coordinated set, you ensure:
• Uniform wear and material condition across the entire chain path
• Balanced chain ride, consistent tension and accurate timing
• Reduced noise, less chain slap or vibration
• Longer service life for chain, sprockets and tensioners
• Peace of mind during a major engine service or rebuild

When to replace:
• Chain noise or slap detected during start-up or under load
• Visual inspection shows grooves, wear tracks, deformation or cracked guides
• You are performing a full engine bottom end or top-end rebuild
• The engine has high mileage or you’re restoring to full specification

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91110522207

The product you are viewing cross references to these numbers

Bilstein original equipment shock absorber. SET OF 2

Bilstein Replacement for the Original Spec

Fits:
Porsche 986 Boxster 2.5L / 2.7L / S 3.2L 09/1996>>


B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.

Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

22-113320KIT

The product you are viewing cross references to these numbers

BILSTEIN B6 shock absorber . SET OF 2



Fits:
Porsche 993 3.6L Carrera / 3.8L Carrera
Porsche 993 Targa 3.6L Carrera / 3.7L Carrera
Porsche 993 3.6L Carrera 4 / 3.8L Carrera 4
Porsche 993 3.6L Turbo

Fits cars:
- with standard chassis,


The shock absorber for those drivers who prefer a sports suspension but are not particularly interested in lowering the body. Also available in special design complete with reservoir for off-road vehicles.
No risk, more fun
For some people it's important to show what they have, for others it's sufficient to know that they have it. The theme of the discussion here is the sports suspension. The BILSTEIN B6 Sports shock absorber is the ideal solution for drivers revelling in the understatement . The wolf in sheep's clothing snarls, when necessary, but otherwise goes reliably about its work in daily traffic with no lowering of the body whatsoever.

Optimum road holding, enhanced tracking stabilisation and excellent damping force: the BILSTEIN B6 Sports is not only first choice as far as sports tuning is concerned but also in the sphere of safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

35-04692936KIT

The product you are viewing cross references to these numbers

Control arm rear with ball joint, SET OF 2.
The high-quality replacement built to OE specifications, it delivers the same fit, strength, and performance as the original part. This suspension component connects the wheel hub to the chassis, maintaining proper alignment and ensuring stable handling. 

Fits:
Porsche 986 Boxster 1997 - 2004
Porsche 987 Boxster 2005 - 2012
Porsche 987c Cayman 2006 - 2012
Porsche 996 C2 / C4 1997 - 2005
Porsche 996 Turbo 2000 - 2005
Porsche 996 GT3 1999 - 2005
Porsche 997 MKI 2006 - 2009
Porsche 997 GT3 2006 - 2009

Diagram ref no 13

This product supersedes Porsche's old part numbers:
99633104506, 99633104508, 99633104510, 99633104512, 99733104504 , 99633104512

What this product does:
• Provides a secure connection between the chassis and wheel hub
• Maintains wheel alignment for safe, predictable handling
• Absorbs suspension forces while keeping steering precise

Over time, control arms can bend, wear, or develop excessive play in the bushings and ball joints. This can cause uneven tire wear, knocking noises, wheel alignment issues, and a noticeable loss of steering precision. Replacement will restore the correct wheel alignment and suspension stability for which your Porsche was designed.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99733104505

The product you are viewing cross references to these numbers

Bilstein Sports B6 FRONT shock absorber. SET OF 2



Fits:
Porsche 986 Boxster 2.5L / 2.7L / S 3.2L 09/1996>>

Fits cars:
- with standard suspension or M030 sport option 

The shock absorber for those drivers who prefer a sports suspension but are not particularly interested in lowering the body. Also available in special design complete with reservoir for off-road vehicles.
No risk, more fun
For some people it's important to show what they have, for others it's sufficient to know that they have it. The theme of the discussion here is the sports suspension. The BILSTEIN B6 Sports shock absorber is the ideal solution for drivers revelling in the understatement . The wolf in sheep's clothing snarls, when necessary, but otherwise goes reliably about its work in daily traffic with no lowering of the body whatsoever.

Optimum road holding, enhanced tracking stabilisation and excellent damping force: the BILSTEIN B6 Sports is not only first choice as far as sports tuning is concerned but also in the sphere of safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

22-046215KIT

The product you are viewing cross references to these numbers