Kits
Design911 offers an extensive selection of package deals for
Porsche parts, providing an ideal solution for Porsche enthusiasts looking to
upgrade, maintain, or personalize their vehicles. These packages are
thoughtfully curated to include complementary components, ensuring
compatibility and cost-effectiveness.
Replacement water pump with gasket, drive belt and thermostat.
The water pump is a direct-fit replacement designed for Boxster 987 / 987C Cayman / 997 C2 / 997 C4 (non Turbo) This replacement water pump provides consistent coolant circulation under varying engine loads - from everyday driving to spirited performance or track use. Its manufactured to OEM standards, allowing plug-and-play installation.
Fits:
Porsche Boxster 987
Porsche Cayman
Porsche 997 C2/4 2005>> (not turbo)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.997.1.OEM
The product you are viewing cross references to these numbers
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
The water pump is a direct-fit replacement designed for Porsche 996 Turbo / GT-variants models. This replacement water pump provides consistent coolant circulation under varying engine loads - from everyday driving to spirited performance or track use. Its manufactured to OEM standards, allowing plug-and-play installation.
Fits:
Porsche 996 Turbo / GT2 2001 - 2005
Porsche 996 GT3 1999 - 2005
Porsche 996 GT3 RS 2003 - 2004
Diagram ref no 2
The water pump circulates coolant from the radiator through the engine block and heads, then back to the radiator to reject heat. This circulation prevents the engine from overheating, preserves optimal combustion temperatures, and protects internal components under load or high temperature conditions. With correct flow rates and seal integrity, the pump ensures stable thermal management across all driving scenarios.
Over time and mileage, the original water pump can suffer from impeller wear, seal degradation, bearing fatigue or corrosion - especially given the demanding thermal environment of the 996’s flat-six engine. A failing pump can lead to reduced coolant flow, overheating, coolant leaks and potential engine damage. Replacing with a correctly specified unit restores reliable coolant circulation, prevents overheating, and prolongs engine life.
When to replace:
• Coolant leaks visible at pump housing or around gasket/seal area
• Overheating on idle, in traffic or under load - temperature gauge rising above normal
• Unusual noises from the pump area (bearing hum, whine, vibration)
• After many years or high mileage - as part of preventive maintenance (common recommendation every ~4-5 years / ~60,000 miles)
• As part of a cooling-system overhaul (radiator, hoses, thermostat, belt) to ensure all components are fresh and compatible
• If pump’s impeller shows signs of wear or internal corrosion during inspection
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.996TT.1.GEB
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
The water pump is a direct-fit replacement designed for Porsche 996 Turbo / GT-variants models. This replacement water pump provides consistent coolant circulation under varying engine loads - from everyday driving to spirited performance or track use. Its manufactured to OEM standards, allowing plug-and-play installation.
Fits:
Porsche 996 Turbo / GT2 2001 - 2005
Porsche 996 GT3 1999 - 2005
Porsche 996 GT3 RS 2003 - 2004
Diagram ref no 2
The water pump circulates coolant from the radiator through the engine block and heads, then back to the radiator to reject heat. This circulation prevents the engine from overheating, preserves optimal combustion temperatures, and protects internal components under load or high temperature conditions. With correct flow rates and seal integrity, the pump ensures stable thermal management across all driving scenarios.
Over time and mileage, the original water pump can suffer from impeller wear, seal degradation, bearing fatigue or corrosion - especially given the demanding thermal environment of the 996’s flat-six engine. A failing pump can lead to reduced coolant flow, overheating, coolant leaks and potential engine damage. Replacing with a correctly specified unit restores reliable coolant circulation, prevents overheating, and prolongs engine life.
When to replace:
• Coolant leaks visible at pump housing or around gasket/seal area
• Overheating on idle, in traffic or under load - temperature gauge rising above normal
• Unusual noises from the pump area (bearing hum, whine, vibration)
• After many years or high mileage - as part of preventive maintenance (common recommendation every ~4-5 years / ~60,000 miles)
• As part of a cooling-system overhaul (radiator, hoses, thermostat, belt) to ensure all components are fresh and compatible
• If pump’s impeller shows signs of wear or internal corrosion during inspection
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.996TT.1.PIE
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
The OE-Match water pump is a direct-fit replacement designed for Porsche 996 Turbo / GT-variants models. This replacement water pump provides consistent coolant circulation under varying engine loads - from everyday driving to spirited performance or track use. Its manufactured to OEM standards, allowing plug-and-play installation.
Fits:
Porsche 996 Turbo / GT2 2001 - 2005
Porsche 996 GT3 1999 - 2005
Porsche 996 GT3 RS 2003 - 2004
Diagram ref no 2
The water pump circulates coolant from the radiator through the engine block and heads, then back to the radiator to reject heat. This circulation prevents the engine from overheating, preserves optimal combustion temperatures, and protects internal components under load or high temperature conditions. With correct flow rates and seal integrity, the OE Match pump ensures stable thermal management across all driving scenarios.
Over time and mileage, the original water pump can suffer from impeller wear, seal degradation, bearing fatigue or corrosion - especially given the demanding thermal environment of the 996’s flat-six engine. A failing pump can lead to reduced coolant flow, overheating, coolant leaks and potential engine damage. Replacing with a correctly specified OE Match unit restores reliable coolant circulation, prevents overheating, and prolongs engine life.
When to replace:
• Coolant leaks visible at pump housing or around gasket/seal area
• Overheating on idle, in traffic or under load - temperature gauge rising above normal
• Unusual noises from the pump area (bearing hum, whine, vibration)
• After many years or high mileage - as part of preventive maintenance (common recommendation every ~4-5 years / ~60,000 miles)
• As part of a cooling-system overhaul (radiator, hoses, thermostat, belt) to ensure all components are fresh and compatible
• If pump’s impeller shows signs of wear or internal corrosion during inspection
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.996TT.1.OEM
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
- Porsche 996 GT3 MKI 1999-02
- Porsche 996 GT3 MKII 2003>>
- Porsche 996 GT3 RS 2003-04
Water pump comes with a gasket and METAL impeller.
Fits:
Porsche Boxster 1997-04 Without aircon
Porsche 996 C2/4 1997-04 Without aircon
Water pump kit with drive belt and standard temperature thermostat. Kit comes with all bolts and gasket needed to complete the job. Please note we advise to get additional antifreeze (approx 6 litres). Available separately.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.996.2.MEY
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Water pump comes with a gasket and METAL impeller.
Fits:
Porsche Boxster 1997-04 Without aircon
Porsche 996 C2/4 1997-04 Without aircon
Water pump kit with drive belt and standard temperature thermostat. Kit comes with all bolts and gasket needed to complete the job. Please note we advise to get additional antifreeze (approx 6 litres). Available separately.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.996.2.GEB
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Water pump comes with a gasket and METAL impeller.
Fits:
Porsche Boxster 1997-04 cars with aircon
Porsche 996 C2/4 1997-04 cars with aircon
*if your car has no aircon you will have to swap the drive belt to part number 99610215165. You can edit all products in your basket.
Water pump kit with drive belt and standard temperature thermostat. Kit comes with all bolts and gasket needed to complete the job. Please note we advise to get additional antifreeze (approx 6 litres). Available separately.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.996.1.MEY
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Water pump comes with a gasket and METAL impeller.
Fits:
Porsche Boxster 1997-04 cars with aircon
Porsche 996 C2/4 1997-04 cars with aircon
*if your car has no aircon you will have to swap the drive belt to part number 99610215165. You can edit all products in your basket.
Water pump kit with drive belt and standard temperature thermostat. Kit comes with all bolts and gasket needed to complete the job. Please note we advise to get additional antifreeze (approx 6 litres). Available separately.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
WATERPUMP.996.1.GEB
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
Porsche 964 C4 1989-93 LARGE CALIPER (REAR)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT964.R3.SEB
The product you are viewing cross references to these numbers
- Porsche 964 (911) C4 1989-93
Porsche 964 C4 1989-93 LARGE CALIPER (REAR)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT964.R3.ZIM
The product you are viewing cross references to these numbers
- Porsche 964 (911) C4 1989-93
Porsche 964 C2 1991-93 LARGE CALIPER (REAR)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT964.R2.SEB
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
Porsche 964 C2 1991-93 LARGE CALIPER (REAR)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT964.R2.ZIM
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
Porsche 964 C2 1989-91 SMALL CALIPER (REAR)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT964.R1.ZIM
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
Porsche 964 C2 1989-91 SMALL CALIPER (REAR)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT964.R1.SEB
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
Porsche 964 C2 / C4 1990-94 (FRONT)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT964.F.SEB
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
Porsche 964 C2 / C4 1990-94 (FRONT)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
BRAKEKIT964.F.ZIM
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
