Please wait… 
Please wait while we process your order,
do not press the back button… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://design91.uk/images/schemaLogo.png https://design91.uk/images/schemaLogo.png +443456003478 https://design91.uk Facebook Instagram

Kits

About Kits

Kits for Porsche

Design911 offers an extensive selection of package deals for Porsche parts, providing an ideal solution for Porsche enthusiasts looking to upgrade, maintain, or personalise their vehicles. These packages are thoughtfully curated to include complementary components, helping with compatibility and overall cost-effectiveness.

A Quick Look at Kits

Kits information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.

Choosing the Right Fit for Your Porsche

Where Kits are listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, axle or side, and any option codes or connector types where relevant.

  • Typical reasons people choose kits include wanting all the right Porsche parts in one order, reducing the risk of missing seals, clips, or one-time-use fixings, and saving workshop time.
  • Kits help ensure matched components (for example, brake refresh kits, service kits, or suspension refresh kits) so parts work together as intended.
  • Common real-world triggers include repeated failures because a small supporting part was not replaced, mixed part revisions, or mismatched specification between components.
  • If problems occur, they are often traced to incorrect vehicle selection, old core components not addressed, or installation shortcuts rather than the kit itself.
  • Before you start work, compare the kit contents with the Porsche PET diagram and your job list so you know exactly what is included and what may still be needed.
  • Always confirm whether kits are vehicle-specific, and check if bolts, clips, fluids, and other one-time-use hardware are included or need to be added separately.

Browse by Category

If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.

Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, increased stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.

  • Check whether new fitting kits and wear sensors are included or should be added separately.
  • Confirm if parts are OE-equivalent replacements or higher-friction performance upgrades before ordering.

Brake Pads Packages — Brake pad packages group matched front and rear sets, making it easier to renew all pads at once for consistent feel and balance across the axle. Worn pads can cause squealing, low pedal feel, longer stopping distances and may score discs if run down to the backing plates.

  • Verify whether the package covers front, rear, or both axles and whether it is a standard or performance compound.
  • Check the contents list for anti-squeal shims, hardware and any wear sensors you may want to replace at the same time.

Gearbox / Transmission — You change gearbox and transmission parts when you have shifting issues, noise, leaks, or you are refreshing a high-mileage drivetrain. It is also common during clutch upgrades or ratio changes. Typical symptoms include whining in a specific gear, crunching on shifts, or difficulty selecting gears, as well as leaks at seals or casing joints.

  • Not all noise or poor shifting means the gearbox itself is failing—mounts, linkage, clutch, and oil condition can produce similar symptoms.
  • Using the correct-spec gearbox oil and refreshing it is often a sensible first step before major work.

Service Parts — Service parts are replaced as routine maintenance to keep the engine and systems reliable, efficient, and protected. Doing this on schedule reduces wear, helps prevent breakdowns, and maintains performance—especially on older Porsche models where neglected servicing can quickly lead to costly repairs. Symptoms prompting attention include hard starting, rough idle, reduced fuel economy and poor throttle response.

  • Both OEM and reputable aftermarket parts can be suitable—always match the correct specification for your Porsche.
  • Keeping a clear service log helps diagnostics later and can support the car’s resale value.

Service Kits — Service kits bundle the correct parts for a routine Porsche service into one package, reducing ordering mistakes and ensuring you can reset the car to a known maintenance baseline. They are ideal when catching up on overdue work or planning regular servicing to a consistent standard. Symptoms leading to a full kit are often general, such as sluggish running, inconsistent idle, poor economy, or increased engine noise from old oil and filters.

  • Service kits typically include filters and key consumables, but contents vary—check the list carefully and add any extra items you want to replace while access is good.
  • Kits are usually specific to model, year and engine, so confirm these details before ordering.

Explore Kits at Design911

View the current Kits range for Porsche at Design911, then filter by model and category to narrow down to the right parts and packages for your project.

DISPLAYING 657 to 672 (of 2557 products)
98134304113/1KIT
Product Information
Product Information
Shock Absorbers (PAIR), Front.
Left And Right.

Fits:
Porsche 981 Boxster 2012>>2016
Cars With Option Codes:
029 - Standard Chassis

Diagram Ref No 1


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98134304113
98134304104
98134304105
98134304109
98134304111
98134304113

The product you are viewing cross references to these numbers
98733305128/1KIT
Product Information
Product Information
Shock Absorbers (PAIR), Rear.
Left And Right.

Fits:

Porsche 987 Cayman 2.9L MKII 2009>>2012
Porsche 987 Cayman S 3.4L MKII 2009>>2012
Porsche 987 Boxster 2.9L MKII 2009>>2012
Porsche 987 Boxster S 3.4L MKII 2009>>2012
Cars With Option Codes:
029 - Standard Chassis

Diagram Ref No 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98733305128
98733305116
98733305128
98733305122
22-147585

The product you are viewing cross references to these numbers
99133305326/1KIT
Product Information
Product Information
These replacement REAR shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.
Rear suspension shock absorber designed as replacement for Porsche 911 991 series (2014–2016) Turbo / Turbo S models equipped with PASM/PDCC. Not suitable for GT2 models.
SET OF 2,
 Fits left and right. Must be fitted in pairs
 
Fits:
Porsche 991.1 Turbo / Turbo S  2014 - 2016
Replacement for Cars with option codes:
352 - Electronic Damper Control For PASM And PDCC
475 - "PASM" Electronic Damper Control

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers
  •  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.

 
Diagram ref no 1

As shock absorbers age, their damping performance deteriorates due to worn internal valves, leaks, seal wear or loss of fluid pressure. This degradation can lead to poor ride comfort, loss of control over suspension motion, increased body roll or instability - especially at higher speeds or under load. Replacing restores the original suspension performance and safety attributes.

When to replace:
 Ride becomes overly soft, bouncy or unstable over bumps or dips
 Rear feels vague, loose or unsettled under braking or cornering
 Rear tyres show uneven or accelerated wear
 Original shock is leaking fluid or the damping feels inconsistent
 Completed high-mileage or old suspension refresh - replacing springs, mounts, bushings or other related parts
 Preparing the vehicle for spirited driving, track use, or renewed performance expectations

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99133305326
99133305326
99133305310

The product you are viewing cross references to these numbers
991343045A5/1KIT
Product Information
Product Information
Front Shock Absorber, for cars with PASM.   SET OF 2 - so two units (left + right) 
These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. Engineered for the Porsche 991.1 Turbo / Turbo S (2014-2016) fitted with the electronic damping system Porsche Active Suspension Management (PASM), not suitable for non-PASM or GT2/GT3 variants. 


Fits:
Porsche 991.1 Turbo / Turbo S 2014 - 2016
Replacements for cars with option codes:
475 - "PASM" Electronic Damper Control
352 - Electronic Damper Control For PASM And PDCC

Diagram ref no 1

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers
  •  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.       

•  Superseding earlier reference numbers: 99134304516, 99134304528, 99134304545, 99134304558


When to replace:
•  Ride becomes harsh, bouncy or unstable over bumps
•  Noticeable loss of front-end stability during braking or cornering
•  PASM shows inconsistent or delayed damping response
•  Visible oil leakage from the shock body
•  Excessive nose-dive, squat or body roll
•  Uneven or accelerated tyre wear
  High-mileage suspension or during a full suspension refresh.



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

991343045A5
99134304516
99134304528
99134304545
99134304558
991343045A5

The product you are viewing cross references to these numbers
99733305335/1KIT
Product Information
Product Information
Shock Absorbers (PAIR), Rear.
Left And Right.

These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. 

Fits:
Porsche 997.2 Turbo MKII 2010>>2013

Diagram Ref No 1

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers)   
  • Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.                   


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99733305335
99733305335
99733305326
99733305328

The product you are viewing cross references to these numbers
99733304911/1KIT
Product Information
Product Information
These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. 
SET OF 2.  Fits Left And Right. Must be fitted as a pair 

Fits:
Porsche 997.1 Carrera 4 TARGA / Carrera 4S TARGA MKI 2005>>2008
Porsche 997.2 Carrera 4 TARGA / Carrera 4S TARGA MKII 2009>>2012
Replacement for Cars With Option Codes:
475 - "PASM" Electronic Damper Control

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers
  •  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.


Diagram Ref No 1



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99733304911
99733304911
99733304910
99733304903
99733304904

The product you are viewing cross references to these numbers
95B513035K/3KIT
Product Information
Product Information
These replacement Rear "FULL ASSEMBLEY" shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. 
For Cars WITH Or WITHOUT Air Suspension. SET OF 2. Fits Left And Right. Must be installed as a pair


Fits:

Porsche 95B.1 Macan MKI 2014>>2018
Replacement for Cars With Option Codes:
1BH - Suspension/Dampers, Standard 2 PASM
1BK - Air Suspension With Levelling System And Height Adjustment (PASM)

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers
  • Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.

Diagram 1 Ref No 2, 3, 4, 5    Diagram 2 Ref No 5, 6, 7, 8



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95B513035K
95B513035H
95B513035
95B513035A
95B513035E
95B513035F
319042
95B513035K
8K0512137A
95B512131D
95B513353A
20-245900

The product you are viewing cross references to these numbers
95B513035K/2KIT
Product Information
Product Information
These replacement Rear shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.
For Cars WITH Or WITHOUT Air Suspension. SET OF 2. Fits Left And Right. Must be installed as a pair


Fits:

Porsche 95B.1 Macan MKI 2014>>2018
Replacement for Cars With Option Codes:
1BH - Suspension/Dampers, Standard 2 PASM
1BK - Air Suspension With Levelling System And Height Adjustment (PASM)

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers
  • Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.

Diagram Ref No 2 And 5



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95B513035K
95B513035H
95B513035
95B513035A
95B513035E
95B513035F
319042
95B513035K

The product you are viewing cross references to these numbers
95B413031AC/2KIT
Product Information
Product Information
These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. 
SET OF 2.  Fits Left And Right. Must be fitted in pairs 


Fits:
Porsche 95B.1 Macan MKI 2014>>2018
Replacement For Cars With (1BH) Suspension/Dampers, Standard 2 PASM Porsche Active Suspension Management (Electronic Damper Control)

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers
  •  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.       

Diagram Ref No 18



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95B413031AC
95B413031M
95B413031A
95B413031F
95B413031G
319 041
319041
23-245891
95B413031AC

The product you are viewing cross references to these numbers
971513035E/2KIT
Product Information
Product Information
Rear Shock Absorber Full Assembly For PASM Cars. For Cars With And Without Air Suspension.
These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. 
SET OF 2. Fits Left And Right.


Fits:
Porsche 971.1 Panamera MKI 2017>>2020
Porsche 971.2 Panamera MKII 2021>>2023
Replacement for cars with I475 With PASM

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers
  • Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.

Diagram Ref No 1, 2, 3 And 4



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

971513035E
971513035B
971513035C
971513035D
971513035E

The product you are viewing cross references to these numbers
971513035E/1KIT
Product Information
Product Information
Rear shock absorber strut for cars with PASM with or without air suspension.  Fits: Rear axle, fits both left and right sides.
These replacement shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. 
SET OF 2 


Part number: 971513035E Supersessions: This part number supersedes previous versions, including 971513035B, 971513035C, and 971513035D.

Fits:
Porsche 971.1 Panamera MKI 2017>>2020
Porsche 971.2 Panamera MKII 2021>>2023
Replacement for car with I475 With PASM

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping..
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers
  • Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.

Diagram Ref No 1



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

971513035E
971513035B
971513035C
971513035D
971513035E

The product you are viewing cross references to these numbers
64434350113/1KIT
Product Information
Product Information
The front axle vibration damper. 
SET OF 2, Left and Right.

Fits:
Porsche 356 A / B / C 1956 - 1965

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

64434350113
64434350113

The product you are viewing cross references to these numbers
97033314508/1KIT
Product Information
Product Information
These replacement REAR shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. 
SET OF 2. Fits Left And Right.  These should only be replaced in pairs

Fits:

Porsche 970 Panamera MKI 2010>>2013
Replacement for Cars With Option Codes:
475 - "PASM" Electronic Damper Control

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers
  •  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.

Diagram Ref No 2



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97033314508
97033314505
97033314506
97033314507
97033314508
97033314504

The product you are viewing cross references to these numbers
9Y0513031C/1KIT
Product Information
Product Information
These replacement rear shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed. 
SET OF 2.  Fits Left & Right.

Fits:
Porsche 9YA Cayenne 2018>>2023
Replacement for cars with Suspension/Dampers PASM (Option Code: 1BH)

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers
  •  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.

 
Diagram Ref No 1



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9Y0513031C
9Y0513031B
9Y0513031C

The product you are viewing cross references to these numbers
9Y0413031E/1KIT
Product Information
Product Information
These replacement FRONT shock absorbers are compatible with PASM-equipped cars and include built-in cancellation resistors to eliminate dashboard errors. They effectively bypass the Active Suspension Management system, allowing the vehicle to function as though it has standard suspension installed.
SET OF 2  Fits Left And Right.

Fits:
Porsche 9YA.1 Cayenne 2018>>2024
Replacement for Cars With Option Codes:
1BH - Suspension/Dampers, Standard 2 PASM

  • These shock absorbers are not PASM dampers and do not offer PASM-adjustable damping.
  • They are designed as standard replacement units with built-in electronics to cancel PASM fault warnings.
  • For correct functionality and proper vehicle handling, they must be installed as a full set of four (2 × front shock absorbers + 2 × rear shock absorbers
  •  Mixing PASM units with OEMatch replacement units is not permitted and may result in suspension imbalance or fault messages.       

Diagram Ref No 1

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9Y0413031E
9Y0413031E
9Y0413031B
958413031A
9Y0413031C

The product you are viewing cross references to these numbers
95533305151/1KIT
Product Information
Product Information
Shock Absorbers (PAIR), Rear.
Left And Right.

Fits:
Porsche 9PA1 Cayenne (957) 3.6L 2007>>2010
Porsche 9PA1 Cayenne S / GTS (957) 4.8L 2007>>2010
Porsche 9PA1 Cayenne Turbo / Turbo S (957) 4.8L 2007>>2010
Car With Option Codes:
1BW - Comfort Suspension/Damping (Steel Springs)

Diagram Ref No 18

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95533305151
95533305151
95533305150

The product you are viewing cross references to these numbers
DISPLAYING 657 to 672 (of 2557 products)