do not press the back button…
Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Kits
Kits for Porsche
Design911 offers an extensive selection of package deals for Porsche parts, providing an ideal solution for Porsche enthusiasts looking to upgrade, maintain, or personalise their vehicles. These packages are thoughtfully curated to include complementary components, helping with compatibility and overall cost-effectiveness.
A Quick Look at Kits
Kits information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Kits are listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, axle or side, and any option codes or connector types where relevant.
- Typical reasons people choose kits include wanting all the right Porsche parts in one order, reducing the risk of missing seals, clips, or one-time-use fixings, and saving workshop time.
- Kits help ensure matched components (for example, brake refresh kits, service kits, or suspension refresh kits) so parts work together as intended.
- Common real-world triggers include repeated failures because a small supporting part was not replaced, mixed part revisions, or mismatched specification between components.
- If problems occur, they are often traced to incorrect vehicle selection, old core components not addressed, or installation shortcuts rather than the kit itself.
- Before you start work, compare the kit contents with the Porsche PET diagram and your job list so you know exactly what is included and what may still be needed.
- Always confirm whether kits are vehicle-specific, and check if bolts, clips, fluids, and other one-time-use hardware are included or need to be added separately.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, increased stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.
- Check whether new fitting kits and wear sensors are included or should be added separately.
- Confirm if parts are OE-equivalent replacements or higher-friction performance upgrades before ordering.
Brake Pads Packages — Brake pad packages group matched front and rear sets, making it easier to renew all pads at once for consistent feel and balance across the axle. Worn pads can cause squealing, low pedal feel, longer stopping distances and may score discs if run down to the backing plates.
- Verify whether the package covers front, rear, or both axles and whether it is a standard or performance compound.
- Check the contents list for anti-squeal shims, hardware and any wear sensors you may want to replace at the same time.
Gearbox / Transmission — You change gearbox and transmission parts when you have shifting issues, noise, leaks, or you are refreshing a high-mileage drivetrain. It is also common during clutch upgrades or ratio changes. Typical symptoms include whining in a specific gear, crunching on shifts, or difficulty selecting gears, as well as leaks at seals or casing joints.
- Not all noise or poor shifting means the gearbox itself is failing—mounts, linkage, clutch, and oil condition can produce similar symptoms.
- Using the correct-spec gearbox oil and refreshing it is often a sensible first step before major work.
Service Parts — Service parts are replaced as routine maintenance to keep the engine and systems reliable, efficient, and protected. Doing this on schedule reduces wear, helps prevent breakdowns, and maintains performance—especially on older Porsche models where neglected servicing can quickly lead to costly repairs. Symptoms prompting attention include hard starting, rough idle, reduced fuel economy and poor throttle response.
- Both OEM and reputable aftermarket parts can be suitable—always match the correct specification for your Porsche.
- Keeping a clear service log helps diagnostics later and can support the car’s resale value.
Service Kits — Service kits bundle the correct parts for a routine Porsche service into one package, reducing ordering mistakes and ensuring you can reset the car to a known maintenance baseline. They are ideal when catching up on overdue work or planning regular servicing to a consistent standard. Symptoms leading to a full kit are often general, such as sluggish running, inconsistent idle, poor economy, or increased engine noise from old oil and filters.
- Service kits typically include filters and key consumables, but contents vary—check the list carefully and add any extra items you want to replace while access is good.
- Kits are usually specific to model, year and engine, so confirm these details before ordering.
Explore Kits at Design911
View the current Kits range for Porsche at Design911, then filter by model and category to narrow down to the right parts and packages for your project.
This door seal kit includes two flap-type rubber seals - one for the left door and one for the right door. It designed for the Porsche 911 Coupé (1965-73). Manufactured to Porsche’s original specification, these seals ensure correct fit, profile and durability for both doors. Each seal mounts along the door edge, compressing against the chassis to keep out water, wind and debris while maintaining cabin comfort and sound insulation.
SET OF 2, for both left and right doors.
Fits:
Porsche 911 1965 - 1973 Coupe
Diagram ref no 26
This rubber seal mounts to the door edge and is compressed when the door closes, forming a tight barrier between the door and chassis. It prevents water ingress, reduces wind noise, and maintains cabin insulation - crucial for the comfort and integrity of your classic 911.
Over time, exposure to UV rays, weather and repeated door operations will degrade the rubber: it may harden, crack, shrink or lose its sealing ability. A compromised seal can lead to water leaks, wind noise, or interior damage. Installing this replacement restores the correct fit and sealing performance you expect from a Porsche-spec part.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91153109501
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Porsche 996 911 Carrera Rear Shock Absorber Kit Fits cars WITHOUT M030 sports suspension.
Restore the precise ride quality and confident handling your Porsche 996 911 Carrera was built to deliver. Over time, shocks gradually wear down, making changes in handling and comfort hard to notice until performance begins to fade. This complete shock absorber kit includes nearly everything you need to replace your worn components—shock mounts, bump stops, dust boots, and all necessary hardware.
Fits:
Porsche 996 3.4L Carrera
Porsche 996 3.6L Carrera
Porsche 996 3.6L Carrera S
Porsche 996 3.4L Carrera 4,
Porsche 996 3.6 Carrera 4,
Porsche 996 3.6 Turbo,
Porsche 996 3.6 Turbo S
With fresh shocks installed, you can expect:
Sharper, more responsive handling Improved ride comfort and stability Reduced braking distances More even tire wear
Note: Coil springs are not included and can be purchased separately if needed. The original washers and spacers can typically be reused unless they show signs of damage upon inspection.
Quality direct replacement shock absorbers constructed and finished to a high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.
Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99633305185
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Porsche 996 911 Carrera Rear Shock Absorber Kit Fits cars WITHOUT M030 sports suspension.
Restore the precise ride quality and confident handling your Porsche 996 911 Carrera was built to deliver. Over time, shocks gradually wear down, making changes in handling and comfort hard to notice until performance begins to fade. This complete shock absorber kit includes nearly everything you need to replace your worn components—shock mounts, bump stops, dust boots, and all necessary hardware.
Fits:
Porsche 996 3.4L Carrera
Porsche 996 3.6L Carrera
Porsche 996 3.6L Carrera S
Porsche 996 3.4L Carrera 4,
Porsche 996 3.6 Carrera 4,
Porsche 996 3.6 Turbo,
Porsche 996 3.6 Turbo S
With fresh shocks installed, you can expect:
Sharper, more responsive handling Improved ride comfort and stability Reduced braking distances More even tire wear
Note: Coil springs are not included and can be purchased separately if needed. The original washers and spacers can typically be reused unless they show signs of damage upon inspection.
B4 High Quality direct replacement shock absorbers constructed and finished to Bilstein's high standards often far and above what the car was originally supplied with. They can actually be a performance improvement if replacing plain, none gas charged, oil filled dampers. They dramatically reduce cavitation / oil foaming, thus give for more stable damping forces when driven 'spiritedly'. Some surprising cars come with plain oil filled dampers.
Key Features:
- Twin Tube Damper
- Gas pressurized
- OE damping forces
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
24-147644KIT.1
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
Fits:
Porsche 95B Macan S 3.0L / Turbo 3.6L 2014-18
Porsche 958 Cayenne 3.6L V6 Turbo / V6 Turbo GTS 2015-18
Porsche 970 Panamera S 3.0L 2014-16
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99917023590
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
SET OF 12 pcs
Fits:
Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
Porsche 95B.2 Macan S Petrol 3.0L V6 354Bhp 2019-21
For optimal engine efficiency, Porsche recommends replacing Ignition Coils & Spark plugs at regular intervals - every 30,000 miles for the Macan and every 40,000 miles for the Cayenne and Panamera. When ignition coils begin to fail, you may notice a check engine light triggered by a cylinder misfire. This can lead to reduced performance, rough running, poor fuel efficiency, and in severe cases, engine damage.
What Does an Ignition Coil Do?
An ignition coil is a crucial part of your vehicle’s ignition system. It converts the battery’s low voltage into the high-voltage current needed to create a spark at the spark plug - igniting the air-fuel mixture inside each cylinder.
When an ignition coil starts to fail, you may experience:
• Engine misfires: Jerking or shuddering during acceleration due to incomplete combustion.
• Rough idling: Noticeable vibration or shaking when the vehicle is at rest.
• Reduced engine power: Sluggish acceleration or loss of performance.
• Illuminated check engine light: Often indicating a misfire code.
• Hard starting or backfiring: Caused by inconsistent or weak sparks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94660210403
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
- Porsche 95B.2 Macan S Petrol 3.0L V6 354Bhp 2019-21
.JPG?width=197&height=148&format=webp "Ignition coils set of 6 Porsche Macan / Cayenne / Panamera - 94660210400, 94660210401, 94660210402, 94660210403, 9466021040, 94660210404")
For optimal engine efficiency, Porsche recommends replacing ignition coils at regular intervals — every 30,000 miles for the Macan and every 40,000 miles for the Cayenne and Panamera. When ignition coils begin to fail, you may notice a check engine light triggered by a cylinder misfire. This can lead to reduced performance, rough running, poor fuel efficiency, and in severe cases, engine damage.
Fits:
- · Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- · Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- · Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- · Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- · Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- · Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- · Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- · Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- · Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- · Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
- · Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
- · Porsche 95B.2 Macan S Petrol 3.0L V6 354Bhp 2019-21
What Does an Ignition Coil Do?
An ignition coil is a crucial part of your vehicle’s ignition system. It converts the battery’s low voltage into the high-voltage current needed to create a spark at the spark plug — igniting the air-fuel mixture inside each cylinder.
- When an ignition coil starts to fail, you may experience:
- Engine misfires: Jerking or shuddering during acceleration due to incomplete combustion.
- Rough idling: Noticeable vibration or shaking when the vehicle is at rest.
- Reduced engine power:
- Sluggish acceleration or loss of performance.
- Illuminated check engine light:
- Often indicating a misfire code. Hard starting or backfiring: Caused by inconsistent or weak sparks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94660210403
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
- Porsche 95B.2 Macan S Petrol 3.0L V6 354Bhp 2019-21
For optimal engine efficiency, Porsche recommends replacing ignition coils at regular intervals — every 30,000 miles for the Macan and every 40,000 miles for the Cayenne and Panamera. When ignition coils begin to fail, you may notice a check engine light triggered by a cylinder misfire. This can lead to reduced performance, rough running, poor fuel efficiency, and in severe cases, engine damage.
Fits:
- · Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- · Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- · Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- · Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- · Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- · Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- · Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- · Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- · Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- · Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
- · Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
- · Porsche 95B.2 Macan S Petrol 3.0L V6 354Bhp 2019-21
What Does an Ignition Coil Do?
An ignition coil is a crucial part of your vehicle’s ignition system. It converts the battery’s low voltage into the high-voltage current needed to create a spark at the spark plug — igniting the air-fuel mixture inside each cylinder.
- When an ignition coil starts to fail, you may experience:
- Engine misfires: Jerking or shuddering during acceleration due to incomplete combustion.
- Rough idling: Noticeable vibration or shaking when the vehicle is at rest.
- Reduced engine power:
- Sluggish acceleration or loss of performance.
- Illuminated check engine light:
- Often indicating a misfire code. Hard starting or backfiring: Caused by inconsistent or weak sparks.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
94660210403
The product you are viewing cross references to these numbers
- Porsche 958 Cayenne V6 3.6L Petrol 300Hp 2010-17
- Porsche 958 Cayenne S V8 4.8L Petrol 400HP 2010-17
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 95B.1 Macan S Petrol 3.0L V6 340Bhp 2014-18
- Porsche 95B.1 Macan GTS Petrol 3.0L V6 360Bhp 2014-18
- Porsche 95B.1 Macan Turbo 3.6L V6 400Bhp 2014-18
- Porsche 95B.2 Macan S Petrol 3.0L V6 354Bhp 2019-21
SET OF 2, for both left and right doors.
Compatible with Coupe models :
Porsche 911 1965-1968 2.0L / 912 SWB (F)
Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
Porsche 911 1978-1983 3.0L / SC
Porsche 911 1984-1986 3.2L
Porsche 911 1987-1989 3.2L G50
Porsche 911 1975-1977 3.0L Turbo (930)
Porsche 911 1978-1989 3.3L Turbo (930)
Porsche 964 (911) C2 1989-93
Porsche 964 (911) C4 1989-93
Porsche 964 (911) RS 3.6L 1991-93
Porsche 964 (911) RS 3.8L 1991-93
Porsche 964 (911) TURBO 3.3L 1991-93
Porsche 964 (911) TURBO 3.6L 1991-93
Diagram ref no 24
Common Signs of Door Seal Failure
• Cracks or tears: Continuous exposure to weather and repeated door use can cause the rubber to dry out and crack.
• Shrinkage or compression: Temperature changes may cause the seal to shrink or lose shape, creating small gaps that reduce its sealing ability.
• Water leaks or wind noise: A damaged or worn seal can lead to water seeping into the cabin during rain or increased wind noise while driving at higher speeds.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91153109503
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
This door weatherstrip seal is engineered to meet the original Porsche specification for the door openings of Porsche 911 (1966-94) Targa and Cabriolet models.
SET OF 2, for both left and right doors.
Fits:
Porsche 911 1966 - 1989 Targa / Cabrio
Porsche 964 1989 - 1994 Targa / Cabrio
Diagram ref no 23
• Position: Door-to-body sealing location (left and right side)
• Also referenced by cross-numbers: 91153109340, 91153109345, 91153109446, 91153109540
Over years of use, door weather-strips are exposed to UV light, temperature cycling, door movement and moisture. They can stiffen, crack, shrink or deform — leading to wind noise, water leaks or reduced cabin comfort.
Replacing with a fresh seal restores the original fit, improves door closing feel, and ensures a watertight, quiet cabin.
Replace when:
• You detect water leakage into the door or cabin
• Wind noise is heard around the door frame
• The existing seal appears cracked, hard, compressed or missing
• You are performing door hinge or body-shell restoration and want correct sealing integrity
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91153109541
The product you are viewing cross references to these numbers
- Porsche 911 1965-1968 2.0L / 912 SWB (F)
- Porsche 911 1968-1973 2.2L / 2.4L / 2.7L RS LWB (F)
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
- Porsche 911 1984-1986 3.2L
- Porsche 911 1987-1989 3.2L G50
- Porsche 911 1975-1977 3.0L Turbo (930)
- Porsche 911 1978-1989 3.3L Turbo (930)
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- 1 x Ignition HT lead set. Porsche 993 3.6L Carrera (99360206099
- 2 x Distributor cap. Porsche 964 / 993 (93060291901/2
- 2 x Rotor arm. Porsche 964 / 993 (93060290202/1
- 1 x Ignition coil. Porsche 993 1994-98 (99360207101
- 12 x Spark plug. Porsche 964 / 964RS / 993 / 993RS (99917018390/1
Fits:
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IGNITIONKIT993.1
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
Crankcase Breather System (Air/Oil Separator)
The crankcase breather system, also known as the air/oil separator (AOS), is a critical engine component that should be replaced every 30,000 miles—or sooner if signs of failure appear.
When the system fails, it can cause:
- Vacuum leaks due to cracked hoses or a damaged air/oil separator
- Oil consumption and fouled spark plugs, as oil is drawn into the intake
- Increased crankcase pressure, which can lead to gasket leaks and other engine issues
Preventative Maintenance
Preventative maintenance is always the best approach. Our comprehensive Crankcase Breather Hose Kit includes all the components you need to replace the system properly. We also recommend performing an engine oil change at the same time to ensure peak performance and longevity.
The AOS is basically a small diaphragm distillery which distills the minute amounts of oil mist in the crankcase, liquifies it and sends it back to the crankcase. The "clean" air is now sent into the air intake (after the throttle body) to be burned off by the engine.
When the AOS starts to fail it cannot separate all of the oil out of the mist and some liquid oil is sent to the air intake.
A few drops of oil is enough to generate the GREAT SMOKE BOMB for which our cars are famous for.
A big smoke bomb once in a while is completely normal, due to the architecture of the flat-6 engine, which may let a drop of oil flow into one of the combustion chambers sporadically.
Fits:
Porsche 996 C2 3.4L 1997-08/01
Porsche 996 C4 3.4L 1997-08/01
Parts included are:
- 1 x AOS Oil / air separator. Porsche 996 3.4L (ref 99610702355)
- 1 x Oil separator breather hose. Porsche 996 3.4L >>2001 (ref 99610714555)
- 1 x Crankcase breather hose. Porsche Boxster 986 >>2002 / 996 (ref 99610714755)
- 1 x Oil / Air Separator Boot Clamp. Porsche 986 Boxster / 996 >>2001 (ref 99951263000)
- 1 x Oil / Air Separator Boot for Porsche 996 3.4L 1998-02 / Boxster 986 - (ref 99610723752)
Click pictures for large parts diagram.
Diagram Ref No 1, 4 , 5
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
OILSEPARATOR.996.1.OEM
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
This rubber strap set (2 pcs) is manufactured to original Porsche specifications to secure the air cleaner housing on Porsche 911 / 911 S / Carrera 3.0 / 911 SC (1974 – 1983). Each strap replicates the factory design, providing precise elasticity, correct length, and durable retention for a stable, vibration-free air cleaner assembly.
Fits:
Porsche 911 / 911 S 1974–1977
Porsche Carrera 3.0 1976–1977
Porsche 911 SC 1978–1983
Diagram ref no 15
These straps firmly hold the air filter housing in place, ensuring proper sealing and alignment. By preventing vibration and air leaks, they help maintain consistent engine airflow, filtration efficiency, and overall performance.
• Includes: 2 × Rubber straps for air cleaner housing
• Position: Engine compartment – air cleaner housing mount
Over time, the original straps can crack, stretch, or lose tension due to constant heat and aging. Worn straps may allow the air box to rattle or leak unfiltered air, reducing efficiency and risking engine wear. Replacing both straps together ensures equal tension and reliable, factory-level security.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
93011036500
The product you are viewing cross references to these numbers
- Porsche 911 1974-1977 2.7L / 1976-77 3.0 Carrera
- Porsche 911 1978-1983 3.0L / SC
These mounts support the front shock absorber while isolating the chassis from vibration and impact. They maintain correct suspension geometry and allow the strut to pivot under steering loads, ensuring proper alignment, road feedback, and ride comfort.
SET OF 2
Porsche 993 1994 - 1998 (not RS)
Diagram ref no 2
• Direct fit replacement, matching OEM dimensions, mounting points, and bearing or mounting hardware.
• Location: Front axle, upper shock/strut assembly mount, fits left and right shock absorbers.
• Designed to maintain proper strut angle, absorb vibration, and ensure geometry and ride comfort.
The front strut mount endures high loads, road vibration and pivoting motion of the suspension. A worn or failed mount can lead to clunking noises, poor alignment, erratic tyre wear or degraded ride comfort.
Replacing with a new replacement unit restores the correct mount geometry, the proper bearing or bushing action, and helps maintain the precise handling and comfort expected from the Porsche 993 platform.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99334301800
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
- Porsche 993 (911) TURBO S 1994-97
Aluminium PDK Oil Sump with Oil Filter and fluid (ATF) Kit.
The Aluminium PDK Oil Sump with oil filter is a premium upgrade designed to replace the standard composite transmission pan. Crafted from high-strength, corrosion-resistant aluminium, it provides superior durability, improved cooling, and easier servicing - while maintaining exact fitment and compatibility with the original transmission system.
For cars with PDK Transmission (dual clutch)
Porsche 970.1 Panamera 2009 - 2013
Porsche 970.2 Panamera 2014 - 2016
Diagram Ref No. 28 + 29
NOTE: This aluminium transmission oil pan is sold as a complete assembly, and there is no standalone filter element available as a replacement item.
What It Does
The PDK oil sump plays a critical role in the operation of
your dual-clutch transmission system. It houses the transmission fluid and filter, which together:
- Lubricate
internal components to reduce wear and friction.
- Regulate
temperature by dispersing heat generated during gear shifts.
- Filter
debris and metal particles, ensuring clean fluid circulation.
- Maintain hydraulic pressure stability for smooth and consistent gear engagement.
This aluminium replacement sump provides a warp-free sealing surface, optimal thermal conductivity, and OE-fit dimensions for a simple bolt-on installation.
Why PDK Oil Sumps Fail
The standard composite (plastic) transmission pans found in
many performance cars are susceptible to:
- Warping
from heat cycles, leading to fluid leaks and improper sealing.
- Cracking
or distortion caused by torque stress or road debris impact.
- Thread
wear from repeated fluid services.
- Built-in non-replaceable filters, requiring complete pan replacement during each service.
Additionally, neglecting transmission fluid changes
can cause:
- Poor shifting performance or hesitation.
- Overheating and accelerated clutch wear.
- Contaminant buildup, leading to internal component damage.
By upgrading to a durable aluminium sump with a filter, you eliminate the weaknesses of the standard design and ensure consistent reliability.
Why It Should Be Replaced or Upgraded
Replacing or upgrading to the aluminium PDK oil sump
provides measurable benefits in performance, reliability, and maintenance:
- Serviceable Filter Design – Unlike the standard
setup, you can replace the filter independently, saving time and cost during
fluid changes.
- Long-Term Durability – Made from high-strength alloy aluminium,
offering resistance to warping, cracking, and corrosion.
- Guaranteed Fitment – Manufactured to precise OE pan dimensions for
correct clearances and easy installation.
- Enhanced Heat Dissipation – Aluminium dissipates heat more efficiently
than plastic, extending fluid and component life.
- Extended Transmission Life – Protects against contamination and wear for smoother shifting and reduced long-term wear.
Every unit undergoes quality control at each step of production, ensuring the highest level of precision, sealing integrity, and performance reliability.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97032102500KIT
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
This kit includes two precision-engineered bushes: Part No. 97034379207 for the upper mount and Part No. 97034379307 for the lower mount of the front stabiliser (anti-roll) bar on PDCC-equipped Panamera 970 series (S / GTS). Tailored to factory dimensions, durometer and mounting points, this set ensures correct articulation and performance of your active roll-control system.
SET OF 2 pieces, 1x upper and 1x lower bush.
Fits:
For cars with: option code: 351 - Air Suspension with PDCC
Porsche 970.1 Panamera / S - 2010 to 2013
Porsche 970.1 Panamera GTS - 2010 to 2013
Porsche 970.1 turbo - 2010 to 2013
Diagram ref no 2 (upper) and 3 (lower)
Set included:
• Upper stabiliser bar bush: 1x 97034379207
• Lower stabiliser bar bush: 1x 97034379307
• Benefit: Restores correct fit, alignment, and dynamic stability by replacing both bushings simultaneously for balanced performance and longevity.
When one bush in the roll-bar mount wears, it can compromise the effectiveness of the PDCC system, leading to uneven body roll, clunking noises or accelerated bushing deterioration. Replacing both upper and lower mount bushes ensures the stabiliser bar and its mounts respond as intended by the original design - key for preserving the high-performance handling of your Panamera.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034379X07
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
.JPG){kind=link}
This kit features a pair of front anti-roll bar drop-links (two units), engineered for direct fitment on your Porsche Panamera 970 series (models without PDCC). Each drop-link connects the stabilizer bar to the suspension, delivering smooth, stable handling and restoring factory roll-bar dynamics.
SET OF 2 (2 drop-links - left and right)
Fits:
Vehicles without Porsche Dynamic Chassis Control (PDCC), PR Code 351
Porsche 970-1 Panamera 3.6L V6 2010-13
Porsche 970-1 Panamera 4 3.6L V6 2010-13
Porsche 970-1 Panamera Diesel 3.0L V6 2012-13
Porsche 970-1 Panamera S 4.8L V8 2010-13
Porsche 970-1 Panamera 4S 4.8L V8 2010-13
Porsche 970-1 Panamera GTS 4.8L V8 2013
Porsche 970-1 Panamera Turbo 4.8L V8 2010-13
Porsche 970-1 Panamera Turbo S 4.8L V8 2010-13
Porsche 970-1 Panamera S Hybrid 3.0L V6 2012-13
Porsche 970-2 Panamera 3.6L V6 2014-16
Porsche 970-2 Panamera 4 3.6L V6 2014-16
Porsche 970-2 Panamera Diesel 3.0L V6 2014-16
Porsche 970-2 Panamera S 3.0L V6 2014-16
Porsche 970-2 Panamera 4S 3.0L V6 2014-16
Porsche 970-2 Panamera S E-Hybrid 3.0L V6 2014-16
Porsche 970-2 Panamera GTS 4.8L V8 2014-16
Porsche 970-2 Panamera Turbo 4.8L V8 2014-16
Porsche 970-2 Panamera Turbo S 4.8L V8 2014-16
Diagram ref. 4.
The drop link connects the stabilizer bar to the suspension/floor-frame mount, transmitting roll-bar force during cornering, helping maintain chassis balance and vehicle stability. A correct link is critical to avoid body-roll, knocking noises or suspension instability.
Worn or damaged drop links can lead to excessive body lean, clunking noises over bumps/turns, uneven tire wear and degraded handling. This part is particularly vital in the front axle of performance sedans like the Panamera where roll-control is paramount.
Replace the link when:
• You hear clunking from the front suspension during turns or bumps.
• The stabilizer link is loose, bushings are worn or links show visible damage.
• You are performing a front suspension overhaul, or want to restore firm factory roll-bar mounting.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
97034306903
The product you are viewing cross references to these numbers
- Porsche 970.1 Panamera V6 3.6L 2WD 2009-13
- Porsche 970.1 Panamera 4 V6 3.6L 4WD 2009-13
- Porsche 970.1 Panamera S V8 4.8L 2009-13
- Porsche 970.1 Panamera 4S V8 4.8L 2009-13
- Porsche 970.1 Panamera GTS V8 4.8L 2011-13
- Porsche 970.1 Panamera Turbo V8 4.8L 2009-13
- Porsche 970.1 Panamera Turbo S V8 4.8L 2009-13
- Porsche 970.1 Panamera Diesel V6 3.0L 2011-13
- Porsche 970.1 Panamera S Hybrid V6 3.0L 2011-13
- Porsche 970.2 Panamera V6 3.6L 2WD (310Hp) 2014-16
- Porsche 970.2 Panamera 4 V6 3.6L 4WD (310Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD (420Hp) 2014-16
- Porsche 970.2 Panamera S V6 Turbo 3.0L 2WD Executive 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD (420Hp) 2014-16
- Porsche 970.2 Panamera 4S V6 Turbo 3.0L 4WD Executive 2014-16
- Porsche 970.2 Panamera GTS V8 4.8L 4WD (440Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 4.8L (520Hp) 2014-16
- Porsche 970.2 Panamera Turbo V8 Executive 2014-16
- Porsche 970.2 Panamera Turbo S V8 4.8L 2014-16
- Porsche 970.2 Panamera Diesel V6 3.0L (250Hp) 2014-16
- Porsche 970.2 Panamera S E-Hybrid V6 3.0L (416Hp) 2014-16
Monday-Friday: 8.30am - 5.30pm (GMT)
Saturday: Closed
Sunday: Closed