Kits

Clutch Fork Shaft Repair Kit.

10 Part Kit Contains:

• 2 x 95011671501 Clutch release fork bushing  
• 1 x 95011671004 Fork Shaft
• 2 x 99911341840 Seal
• 1 x 99920133901 Needle bearing
• 1 x 99920136501 Needle bearing
• 1 x 95011672500 Cover
• 1 x 95011671302 Support
• 1 x 90007505703 Hex bolt

Fits:
Porsche 911 1987-89
Porsche 964 1989-94 all models
Porsche 993 1994-98 all models
Porsche 996 Turbo, GT3
Porsche 997 Turbo, GT3 2005>>

Click "Zoom in" to see the diagram.
Diagram Ref No 10, 11, 17, 16, 15, 21, 14, 18.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

CLUTCHKIT04.1

The product you are viewing cross references to these numbers

Restore Your Porsche Cayenne’s Ride and Safety with Our Suspension Kit

Over time, the control arm and tie rod ball joints in your Porsche Cayenne can wear out, while the rubber bushings may degrade, tear, or oxidize. This wear can lead to uneven tire wear, front-end noise, and vibration, compromising both performance and safety. Our suspension kit restores your vehicle’s handling and ride quality, bringing it back to factory standards.

Professional Tip: A wheel alignment is recommended after installation to ensure optimal performance.

Fits:

• Porsche 955 Cayenne 3.2L V6 2003-06
• Porsche 955 Cayenne S 4.5L V8 2003-06
• Porsche 957 Cayenne 3.0L Diesel 2007-10
• Porsche 957 Cayenne 3.6L 2007-10
• Porsche 957 Cayenne S/GTS 4.8L 2007-10

Suspension Control Arm Kit

Control arms are a critical component of your vehicle’s suspension system, linking the suspension to the subframe. They are typically hinged, allowing your suspension to move smoothly over road irregularities and during turns. Vehicles with independent suspension often feature multiple arms and connection points to enhance ride comfort and stability.

As control arm bushings and joints wear, you may notice looseness or play in the suspension. While some control arms allow for individual component replacement, many require replacing the entire arm for proper function.

Signs You May Need a Control Arm Replacement

• Excessive play in suspension joints where the arms connect to the subframe or knuckle
• Buckling or clunking noises from the suspension
• Uneven tire wear
• Difficulty achieving proper wheel alignment
• Shuddering or vibration felt in the steering wheel at highway speeds
• Steering wheel pulling or wandering side-to-side

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

SUSPENSIONKIT955

The product you are viewing cross references to these numbers

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.  SET OF 2


Fits:
Porsche 955 Cayenne 2003-06 (Front)
Porsche 957 Cayenne 2007-09 (Front)
Porsche 958 Cayenne 2010>> (Front)
All Models None Turbo



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534703222

The product you are viewing cross references to these numbers

The steering rack controls the front wheels by means of two track rods, terminated by replaceable joints - the "Track Rod Ends", attached to the swivel hubs. These will eventually wear, leading to problems with steering and handling, as well as being a failure point on the UK MOT and presumably on the statutory inspections in other countries.  SET OF 2


Fits:
Porsche 955 Cayenne 2003-06 (Front)
Porsche 957 Cayenne 2007-09 (Front)
Porsche 958 Cayenne 2010>> (Front)
All Models None Turbo



Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95534703222

The product you are viewing cross references to these numbers

Front lower suspension arm kit. Porsche 924 1979>> Onwards

Kit includes
Lower arm x 2

Front arm bush x 2
Rear arm bush x 2

Fits:
Porsche 924  1979>> Onwards

Click 'zoom in' for large parts diagram.
Diagram Ref No 2, 7 and 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

477407153F

The product you are viewing cross references to these numbers

Front lower suspension arm kit. Porsche 924 Up to 1978

Kit includes
Lower arm x 2

Front arm bush x 2
Rear arm bush x 2

Fits:
Porsche 924 >> Up to 1978

Click 'zoom in' for large parts diagram.
Diagram Ref No 2, 7 and 11

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

477407153F

The product you are viewing cross references to these numbers

Cylinder head bolt long & head gaskets Porsche 997 3.8L
Engine Cylinder Head Gasket Kit
The cylinder head gasket is a critical component that seals the cylinder head to the engine block. It serves several key functions, It seals the combustion chamber, ensuring proper compression for efficient engine performance. It prevents coolant and engine oil from mixing by sealing the fluid passages between the cylinder head and engine block.

Fits:

• Porsche 997 MK1 Carrera 2S 3.8L 2005-08
• Porsche 997 MK1 Carrera 4S 3.8L 2005-08 

Diagram ref no 19 & 20.

Signs of Cylinder Head Gasket Failure
A failing head gasket can lead to serious engine problems. Common symptoms include:
Engine overheating

• Low cylinder compression
• External coolant or oil leaks
• White smoke from the exhaust
• Bubbles in the radiator or coolant reservoir
• Milky or white-colored engine oil

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610418059

The product you are viewing cross references to these numbers

Cylinder head bolt long & head gaskets Porsche 996 3.6L / Cayman 3.4L

Engine Cylinder Head Gasket Kit
The cylinder head gasket is a critical component that seals the cylinder head to the engine block. It serves several key functions, It seals the combustion chamber, ensuring proper compression for efficient engine performance. It prevents coolant and engine oil from mixing by sealing the fluid passages between the cylinder head and engine block.

Signs of Cylinder Head Gasket Failure
A failing head gasket can lead to serious engine problems. Common symptoms include:

• Engine overheating
• Low cylinder compression
• External coolant or oil leaks
• White smoke from the exhaust
• Bubbles in the radiator or coolant reservoir
• Milky or white-colored engine oil

Fits:

• Porsche 996 C2 3.6L 09/01-2005
• Porsche 996 C4 3.6L 09/01-2005
• Porsche 996 C4S 3.6L 09/01-2005
• Porsche Cayman S 3.4L 987C 2005-08  
• Porsche Boxster 987 S 3.4L 2005-08/08
• Porsche Boxster S 987 MKII 3.4L 2009-2012
• Porsche Boxster 981 S / GTS 3.4L 2012-16  

Click 'Zoom in' for large parts diagram
Diagram ref no 19 & 20.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99610418059

The product you are viewing cross references to these numbers

Track rod inner joint / Tie rod joint bushing.
SET OF 2 -  (91434705700 / 91434705701 / 91434705702) - replaces the original joint bushing used in Porsche 911 and 914 steering systems. These joints connect the steering rack to the outer tie rods, allowing smooth, controlled articulation while maintaining precise steering geometry and stability.

Fits:
Porsche 911 1965 - 1989 (Not Turbo)
Porsche 914 1970 - 1976

Diagram Ref No 3.

•  Location: Inner ends of both tie rods (left and right), attached to the steering rack
•  Function: Transmits steering movement from the rack to the tie rods, ensuring accurate front-wheel response
•  Installation: Direct replacement – fits original rack and tie rod assembly

Over time, the inner tie rod joints or bushings can wear, causing steering play, vibration, or alignment drift.
Replace when you notice:
•  Steering looseness or rattling
•  Uneven tire wear Vibration or “wandering” at speed

•  Excessive movement when inspecting inner tie rod ends

Installing new inner joints restores tight steering precision, proper tracking, and the responsive handling feel expected from a Porsche.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91434705702

The product you are viewing cross references to these numbers

SET OF TWO - Tie rod joint fork set  (90134731501 / 90134731503 / 90134731504) includes two replacement forks for the original steering linkage joints used in classic Porsche 911 and 914 steering systems. Each fork connects the end of the tie rod (or steering rack link) to the steering linkage, ensuring accurate geometry and a stable, secure connection under load. The fork design allows smooth articulation through the ball joint or tie-rod end while preserving correct steering alignment and responsiveness.

Fits:
Porsche 911 1965 - 1989 (not Turbo)
Porsche 914 1970 - 1976

Diagram ref no 9

Engineered with high-strength steel arms and precision-machined bore geometry, the OE Match version replicates the original Porsche dimensions, spline or tab fits, and durability. It ensures accurate steering response and restores safe, play-free coupling between rack and rod.

•  Location: At the end of the tie rod or steering rack linkage, connecting via a ball joint or pivot.
•  Function: Holds the tie rod end or joint in place, allowing articulation while securely steering linkage motion.
•  Symptoms of Failure: Steering play, looseness, knocking, uneven tire wear
•  Benefits: Restores tight steering feel, OE fitment, high strength, and accurate geometry
•  Installation: Direct-fit replacement; install with new fasteners and verify alignment

Over time, the original tie rod joint fork may wear at pivot surfaces, stretch, or suffer metal fatigue, leading to steering play, misalignment, or knocking under load. Replace this fork during steering rack or tie rod replacement, when you detect lateral play or looseness, or as part of a full steering system overhaul to restore crisp, safe steering response.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90134731504

The product you are viewing cross references to these numbers

Rear control arm bushing set.  Price is for 6 bushes. 
Designed to replace Porsche’s factory silent bloc in rear suspension link arms. Engineered for road use and built to OEM tolerances, this is a direct-fit, stock-spec solution for various Porsche 993.

Fits:
Porsche 993 1995-98 Stock Hardness

Replaces the rubber bushing on each of the rear 993 lower wishbone, camber control arm, and KT control arm. Each arm has 1 rubber bushing, for a total of 6 bushings per kit… enough to do one car.

Stock-hardness – Restores performance and ride quality to original.

Sport-Hardness – Similar to the 993 RS bushing, sport hardness rubber is about 25% firmer. Deflects less under cornering loads and thereby maintains alignment more precisely.

Features & Benefits

• OEM-equivalent rubber compound for a compliant, comfortable ride 
• Designed and manufactured in the EU with strict quality control 
• Backed by Prekom’s 2-year warranty  
• Straightforward installation; no modifications needed on stock link arms

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

PR52004PKIT

The product you are viewing cross references to these numbers

Main, thrust & nose bearing Set - STANDARD. 
This 15-piece set (12 main bearing shells + 2 thrust bearings + 1 Nose bearing) supports the crankshaft along the crankcase, maintaining ideal oil-film clearance, pressure, and alignment throughout the engine’s life. Manufactured to OEM geometry, the set guarantees perfect crush fit, consistent wall thickness, and stable lubrication under the high temperatures and loads typical of Porsche’s flat-six engines.

Fits:
Porsche 911 - 1978 to 1989
Porsche 964 - 1989 to 1994
Porsche 993 - 1994 to 1997
Porsche 996 turbo - 2000 to 2005
Porsche 996 GT3

Diagram Ref No 22, 23, 24

Ideal for engine rebuilds, restorations, or preventative maintenance, these bearings restore factory-smooth rotation, stable oil pressure, and long-term bottom-end reliability.

•  Function: Supports crankshaft rotation and controls axial movement
•  Set Contents: 15 pieces (12 main + 2 thrust bearings +1 nose bearing )
•  Replacement Interval: During engine rebuild or low oil pressure service
•  Benefits: OEM fit, precise clearances, stable lubrication, quiet operation

Main bearings gradually wear from heat, oil contamination, and load stress, causing loss of oil pressure, vibration, and potential crank damage.
Replace:
•   During any engine rebuild or crankshaft service
•   If oil pressure drops or metal in oil is found
•  When clearances exceed factory specifications

Replacing with a new 96410190100 set restores correct oil clearance, smooth rotation, and factory reliability.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96410190100

The product you are viewing cross references to these numbers

Manifold rubber seal. SET OF 2.
Replacement  rubber intake sleeve / connecting hose manufactured to original Porsche specifications. This direct-fit replacement restores airtight sealing between the air flow meter and intake manifold, preventing leaks and ensuring precise fuel metering for smooth, powerful performance.

Fits:
Porsche 964 C2 / C4 1989 - 1994
Porsche 964 Carrera RS
Porsche 993 C2 / C4 1994 - 1995
Porsche 993 Turbo 1994 - 1998

This product supersedes Porsche's old part numbers:
- 96411068601
- 96411068603

Diagram ref no 5.

Material: Heat- and oil-resistant rubber compound
Function: Seals air distributor to intake runners; prevents vacuum leaks
Position: Between intake plenum and cylinder head manifolds
Replacement Interval: During intake removal, rebuild, or when cracks are visible
Benefits: Restores proper airflow, stable idle, and factory performance consistency

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96411068604

The product you are viewing cross references to these numbers

Inlet manifold gasket, SET OF 12.
OE Match replacement gasket built to meet original Porsche specifications, designed for the Porsche 911 Carrera 3.2L (1984–1989). This gasket provides a perfect seal between the intake manifold and the cylinder head, ensuring that air and fuel are delivered precisely to each combustion chamber.

Fits:
Porsche 911 Carrera 3.2L 1984 - 1989 
Engine code: 93020, 93025, 93026
Please note: NOT for 930 Turbo

Diagram Ref No 6.

•  Position: Between intake manifold and cylinder head
•  Function: Seals intake air passages, prevents vacuum or boost leaks
•  Replacement Interval: During intake removal, rebuild, or if leaks or idle issues occur
•  Benefits: Restores airtight sealing, smooth idle, and optimal air-fuel efficiency

Keep your classic Porsche running flawlessly with the OE Match 93011019714 Inlet Manifold Gasket. Built to OEM standards for the 911 Carrera 3.2, it seals the intake manifold to the cylinder head for airtight, efficient performance. Replace worn or leaking gaskets to restore smooth idle, strong power, and factory reliability.

Over time, intake gaskets harden and lose elasticity due to constant exposure to heat, pressure, and fuel vapours.

This can lead to:
•  Air or vacuum leaks affecting mixture balance and idle quality.
•  Reduced power, poor throttle response, or “hunting” idle.
•  Possible lean running and increased engine wear.

Replace during:
•  Intake manifold removal or service.
•  Engine rebuilds or top-end overhauls.
•  Any time vacuum leaks or air-fuel irregularities are detected.

Replacing with an OE Match gasket restores proper sealing, consistent idle, and smooth power delivery — crucial for maintaining your Porsche’s precision performance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93011019714

The product you are viewing cross references to these numbers

Radiator oil cooler rubber buffer, SET OF 3
This replacement buffer is a high-quality replacement for the factory bonded-rubber mounts used to support the oil cooler assembly in air-cooled Porsche engines. It helps isolate vibration, maintain correct alignment, and protect the cooler and adjoining hardware.

Fits:
Porsche 911 1984 - 1989

Diagram Ref No 14.

This is a rubber buffer or mount (often bonded to metal inserts) used to cushion and secure the oil cooler assembly relative to the engine or chassis. It absorbs vibration, prevents metal-to-metal contact, and keeps the cooler in its correct position. It helps avoid stresses on oil cooler brackets, lines, and mating surfaces by providing a flexible mounting point.

Replaces: Porsche 930.207.239.00 / 930.207.239.01 / 930.207.239.02
Position: Between oil cooler and engine or chassis mount — isolates vibration and supports alignment
Function: Absorbs vibration and engine movement, prevents stress on oil cooler lines and brackets
Installation: Direct-fit OE replacement — install as a set for best results
Maintenance Tip: Replace when rubber hardens, cracks, or separates from metal housing

Over time, the rubber in the buffer mount degrades due to heat, oil exposure, ozone, vibration, and fatigue. It may harden, crack, shrink, or separate from its bonded metal insert. A failed mount lets the oil cooler shift or vibrate more than designed, putting strain on cooler hoses, brackets, and mounting flanges — potentially leading to leaks or damage. Excessive vibration may cause noise, misalignment, or premature fatigue of supporting parts. You should replace this buffer when you notice damage or deterioration, when removing or servicing the oil cooler, or as preventive maintenance on high-mileage engines.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93020723902

The product you are viewing cross references to these numbers

Push rod - cam follower. SET OF 8.
Cam Follower is a precision replacement part for the original Porsche cam-follower used in older 4-cylinder engines. It is intended to operate smoothly under valve train motion, providing reliable contact between camshaft and push-rod mechanism.

Fits:
Porsche 356 - All 
Porsche 912 

Diagram ref no 7

A cam follower is a small, hardened component that rides on a camshaft lobe and transfers the cam’s motion to the push-rod, lifter, or other valve train elements. In this application, the push-rod cam follower converts the rotating cam profile into linear motion, ensuring that valves open and close correctly. It must withstand high contact stresses, rotational friction, and lubrication demands while maintaining precise geometry.

Location: Engine top / valve train region, between camshaft and push-rod or lifter assembly.
Fits: Porsche 356 series and 912 engines (all years) that use push-rod overhead valve (OHV) layout.
Quantity: Typically 8 are used per engine (one per valve) in many Porsche 356 / 912 configurations.

Over time, cam followers wear, develop surface fatigue, or lose hardness, which can alter their contact profile. A worn cam follower leads to imprecise valve lift, increased wear of the cam lobe, noise in the valve train, reduced performance, and in extreme cases, damage to cam lobes or push-rods. Because the cam follower is a critical interface in the valvetrain, any deviation from correct shape or surface quality can lead to less efficient engine operation or failures.

When to replace:
•  During an engine rebuild, especially whenever the camshaft or valve components (push-rods, lifters) are serviced or replaced.
•  When valve train noise or knocking develops, which may hint at excessive follower wear or clearances.
•  If you measure wear on the cam lobes or get unusually fast wear on the valves, replace the followers proactively.
•  For preventive maintenance in classic Porsche engines, especially high-mileage or restored vehicles, replacing cam followers helps ensure longevity of the camshaft itself.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

61610502803

The product you are viewing cross references to these numbers