Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Kits
Kits for Porsche
Design911 offers an extensive selection of package deals for Porsche parts, providing an ideal solution for Porsche enthusiasts looking to upgrade, maintain, or personalise their vehicles. These packages are thoughtfully curated to include complementary components, helping with compatibility and overall cost-effectiveness.
A Quick Look at Kits
Kits information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Kits are listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, axle or side, and any option codes or connector types where relevant.
- Typical reasons people choose kits include wanting all the right Porsche parts in one order, reducing the risk of missing seals, clips, or one-time-use fixings, and saving workshop time.
- Kits help ensure matched components (for example, brake refresh kits, service kits, or suspension refresh kits) so parts work together as intended.
- Common real-world triggers include repeated failures because a small supporting part was not replaced, mixed part revisions, or mismatched specification between components.
- If problems occur, they are often traced to incorrect vehicle selection, old core components not addressed, or installation shortcuts rather than the kit itself.
- Before you start work, compare the kit contents with the Porsche PET diagram and your job list so you know exactly what is included and what may still be needed.
- Always confirm whether kits are vehicle-specific, and check if bolts, clips, fluids, and other one-time-use hardware are included or need to be added separately.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, increased stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.
- Check whether new fitting kits and wear sensors are included or should be added separately.
- Confirm if parts are OE-equivalent replacements or higher-friction performance upgrades before ordering.
Brake Pads Packages — Brake pad packages group matched front and rear sets, making it easier to renew all pads at once for consistent feel and balance across the axle. Worn pads can cause squealing, low pedal feel, longer stopping distances and may score discs if run down to the backing plates.
- Verify whether the package covers front, rear, or both axles and whether it is a standard or performance compound.
- Check the contents list for anti-squeal shims, hardware and any wear sensors you may want to replace at the same time.
Gearbox / Transmission — You change gearbox and transmission parts when you have shifting issues, noise, leaks, or you are refreshing a high-mileage drivetrain. It is also common during clutch upgrades or ratio changes. Typical symptoms include whining in a specific gear, crunching on shifts, or difficulty selecting gears, as well as leaks at seals or casing joints.
- Not all noise or poor shifting means the gearbox itself is failing—mounts, linkage, clutch, and oil condition can produce similar symptoms.
- Using the correct-spec gearbox oil and refreshing it is often a sensible first step before major work.
Service Parts — Service parts are replaced as routine maintenance to keep the engine and systems reliable, efficient, and protected. Doing this on schedule reduces wear, helps prevent breakdowns, and maintains performance—especially on older Porsche models where neglected servicing can quickly lead to costly repairs. Symptoms prompting attention include hard starting, rough idle, reduced fuel economy and poor throttle response.
- Both OEM and reputable aftermarket parts can be suitable—always match the correct specification for your Porsche.
- Keeping a clear service log helps diagnostics later and can support the car’s resale value.
Service Kits — Service kits bundle the correct parts for a routine Porsche service into one package, reducing ordering mistakes and ensuring you can reset the car to a known maintenance baseline. They are ideal when catching up on overdue work or planning regular servicing to a consistent standard. Symptoms leading to a full kit are often general, such as sluggish running, inconsistent idle, poor economy, or increased engine noise from old oil and filters.
- Service kits typically include filters and key consumables, but contents vary—check the list carefully and add any extra items you want to replace while access is good.
- Kits are usually specific to model, year and engine, so confirm these details before ordering.
Explore Kits at Design911
View the current Kits range for Porsche at Design911, then filter by model and category to narrow down to the right parts and packages for your project.

The all mighty 996 Turbo may be the perfect Porsche of them all to benefit from the IPD Plenum. Horsepower and torque gains are substantial and immediate (no adaptation required).
Horsepower improvements range from 30 to 35 and boost response improves considerably making for longer, stronger and of course more pleasurable power curves. The IPD plenum develops horsepower throughout the entire power band, especially where it's needed most, from mid range to top end.
Installation of the 996 Turbo Plenum is very challenging and installation should only be performed by a seasoned and qualified Porsche technician.
The 996 Turbo 74mm "Competition" Plenum is designed to function with more seriously modified Turbos developing over 600+ horsepower. Although this 74mm application has been used with great success on a variety of Turbos ranging from mildly modified to 1000+ HP.
This application requires the larger 74mm Porsche throttle body (additional purchase required) and comes with additional hardware to complete the kit. This "Competition Turbo" Plenum will help modified 996 Turbos realize maximum performance.
The increased air flow and air speed develop by the larger Plenum is designed to work with larger turbos, intercoolers, intake piping, high flow Y Pipes and more aggressive software.
Horsepower gains start around 35 hp and deliver max power slightly higher in the rev range creating better top end performance without the drop in power experienced with the factory air distributor.
996 Turbo Competition Plenum: HP Gains 24 / Torque Gains 26.
Fits:
Porsche 996 Turbo/S/X50/ GT2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT996T1
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05

Kit Includes:
1 x Performance Clutch Centre Plate Rigid HD.
1 x Performance Clutch Pressure Plate HD.
1 x Performance Clutch Release Bearing.
Performance clutch cover differences to OE: higher transmittable torque, higher clamp load, release travel might be less, possible higher pedal force. Effortless exchange with OE clutches.
Typical applications include: chip tuning, turbo charger and supercharger modifications, 1/4 mile-race, race circuit (endurance race, Clubsport, autocross), hill climbing (e.g. group N), rally (e.g. group N), slalom, drift racing.
Fits:
Porsche 993 C2
Porsche 993 C4
Porsche 993 C2S
Porsche 993 C4S
Porsche 993 Turbo
Porsche 964 C2
Porsche 964 C4
Porsche 965 Turbo 3.3L
Porsche 965 Turbo 3.6L
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
CLUTCHKIT12
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96

Kit Includes:
1 x Performance Clutch Centre Plate Rigid HD.
1 x Performance Clutch Pressure Plate HD.
1 x Performance Clutch Release Bearing.
Performance clutch cover differences to OE: higher transmittable torque, higher clamp load, release travel might be less, possible higher pedal force. Effortless exchange with OE clutches.
Typical applications include: chip tuning, turbo charger and supercharger modifications, 1/4 mile-race, race circuit (endurance race, Clubsport, autocross), hill climbing (e.g. group N), rally (e.g. group N), slalom, drift racing.
Fits:
Porsche Cayman 2.7L
Porsche Cayman 3.4L
Porsche Boxster 986 2.7L
Porsche Boxster 986 2.5L
Porsche Boxster 987 2.7L
Porsche Boxster 987 3.4L
Porsche Boxster 987 3.6L
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
CLUTCHKIT11
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08

Kit Includes:
1 x Performance Clutch Centre Plate Rigid HD.
1 x Performance Clutch Pressure Plate HD.
1 x Performance Clutch Release Bearing.
Performance clutch cover differences to OE: higher transmittable torque, higher clamp load, release travel might be less, possible higher pedal force. Effortless exchange with OE clutches.
Typical applications include: chip tuning, turbo charger and supercharger modifications, 1/4 mile-race, race circuit (endurance race, Clubsport, autocross), hill climbing (e.g. group N), rally (e.g. group N), slalom, drift racing.
Fits:
Porsche 997 C2S 3.8L
Porsche 997 C4S 3.8L
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
CLUTCHKIT10
The product you are viewing cross references to these numbers
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08

Kit Includes:
1 x Performance Clutch Centre Plate Rigid HD.
1 x Performance Clutch Pressure Plate HD.
1 x Performance Clutch Release Bearing.
Performance clutch cover differences to OE: higher transmittable torque, higher clamp load, release travel might be less, possible higher pedal force. Effortless exchange with OE clutches.
Typical applications include: chip tuning, turbo charger and supercharger modifications, 1/4 mile-race, race circuit (endurance race, Clubsport, autocross), hill climbing (e.g. group N), rally (e.g. group N), slalom, drift racing.
Fits:
Porsche 997 C2 3.6L
Porsche 997 C4 3.6L
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
CLUTCHKIT09
The product you are viewing cross references to these numbers
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08

Kit Includes:
1 x Performance Clutch Centre Plate Rigid HD.
1 x Performance Clutch Pressure Plate HD.
1 x Performance Clutch Release Bearing.
Performance clutch cover differences to OE: higher transmittable torque, higher clamp load, release travel might be less, possible higher pedal force. Effortless exchange with OE clutches.
Typical applications include: chip tuning, turbo charger and supercharger modifications, 1/4 mile-race, race circuit (endurance race, Clubsport, autocross), hill climbing (e.g. group N), rally (e.g. group N), slalom, drift racing.
Fits:
Porsche 996 C2 3.6L
Porsche 996 C4 3.6L
Porsche Boxster S 986 3.2L
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
CLUTCHKIT08
The product you are viewing cross references to these numbers
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster S 986 3.2L 2003-04
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005

Kit Includes:
1 x Performance Clutch Centre Plate Rigid HD.
1 x Performance Clutch Pressure Plate HD.
1 x Performance Clutch Release Bearing.
Performance clutch cover differences to OE: higher transmittable torque, higher clamp load, release travel might be less, possible higher pedal force. Effortless exchange with OE clutches.
Typical applications include: chip tuning, turbo charger and supercharger modifications, 1/4 mile-race, race circuit (endurance race, Clubsport, autocross), hill climbing (e.g. group N), rally (e.g. group N), slalom, drift racing.
Fits:
Porsche 996 C2 3.4L
Porsche 996 C4 3.4L
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
CLUTCHKIT07
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01

Kit Includes:
1 x Clutch Centre Plate Rigid HD.
Level 1 & 2 Upgrade - Transmittable torque 890+Nm / 660lb ft for cars around 600+Bhp
1 x Clutch Pressure Plate HD.
Level 1 & 2 Upgrade - Transmittable torque 890+Nm / 660lb ft for cars around 600+Bhp
1 x Sachs clutch release bearing.
Performance clutch cover differences to OE: higher transmittable torque, higher clamp load, release travel might be less, possible higher pedal force. Effortless exchange with OE clutches.
Typical applications include: chip tuning, turbo charger and supercharger modifications, 1/4 mile-race, race circuit (endurance race, Clubsport, autocross), hill climbing (e.g. group N), rally (e.g. group N), slalom, drift racing.
Fits:
Porsche 996 Turbo
Porsche 996 GT2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
CLUTCHKIT06
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05
DesignTek Boxster Stage 2 Performance package.
Intoxicating growl at idle, partial throttle and wide open throttle. High Grade stainless steel exhaust system for Porsche Boxster 986 1998-2004. 14 - 16 gauge T304 stainless steel.
- + 18 crank hp & + 19 crank torque
- 200 Cell high flow, tri metal german HJS sport catalysts
- 2" tubing (50 mm) straight through design for max. power
- Weighs 57 lbs. (25,8 Kg)
- T 304 stainless steel for improved durability
- Dual 3.5" round tips
Includes:
1 x Sports muffler.
2 x Equal length headers.
2 x 200 cell sports cats.
For the ultimate performance gains we recommend this set is fitted with an ECU remap giving BHP and Torque that you can really feel and superb sports car sound. Please order extra gaskets, nuts, bolts and clamps if required.
NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.
For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.
If you are located outside the UK, please check your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EXHAUSTKIT31
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
DesignTek Porsche Boxster 986 2.7L / 986 S 3.2L Performance package.
High Grade stainless steel exhaust system. made from 14 - 16 gauge T304 stainless steel.
Includes:
1 x Sports muffler,
2 x Equal length headers,
Please order extra gaskets, nuts, bolts and clamps if required.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EXHAUSTKIT32
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
Kit Includes
- Air Induction Kit
- Plenum by IPD
- Throttle Body 82mm
- Milltek Exhaust Cat back
Exhaust Muffler / Silencer Rear box (Catalysts Bypass System).
Sports deep sound muffler/exhaust offers a sportive sound and better throttle response. With secondary cat bypass to increased BHP. Milltek system is complete twin adjaustable stainless steel tails. Made from T304 stainless steel.
For the ultimate performance gains we recommend this set is fitted with an ECU remap giving BHP and Torque that you can really feel and superb sports car sound.
Fits:
Porsche Boxster 987
Porsche Cayman 987C
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POWERKIT9872
The product you are viewing cross references to these numbers
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman S 3.4L 987C 2005-08
Kit Includes
- Air Induction Kit
- Plenum by IPD
- Throttle Body 82mm
- DesignTek Exhaust Cat back
Exhaust Muffler / Silencer Sports Complete with Twin Stainless Steel Tail Pipes
DesignTek sports deep sound muffler/exhaust offers a sportive sound and better throttle response. With secondary cat bypass to increased BHP. Complete twin adjaustable stainless steel tails. Made from T304 stainless steel.
For the ultimate performance gains we recommend this set is fitted with an ECU remap giving BHP and Torque that you can really feel and superb sports car sound.
Fits:
Porsche Boxster 987
Porsche Cayman 987C
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POWERKIT9871
The product you are viewing cross references to these numbers
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman S 3.4L 987C 2005-08

Fits:
Porsche 987 GEN1 Cayman S 3.4L
Porsche 987 GEN1 Boxster S 3.4L
987 Competition Cayman 3.4L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 74mm Throttle Body with 997 GT3 82mm Throttle Body
Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's thrown. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 997 GT3 82mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT98733
The product you are viewing cross references to these numbers
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman S 3.4L 987C 2005-08
Fits
Porsche 997.1 Carrera 2 3.6L 2005 - 2008
Porsche 997.1 Carrera 2S 3.8L 2005 - 2008
Porsche 997.1 Carrera 4 3.6L 2005 - 2008
Porsche 997.1 Carrera 4S 3.8L 2005 - 2008
DesignTek sports exhaust system gives smooth Bhp & Torque. Made from high quality 14-16 gauge T304 stainless steel, hydro-formed muffler cases, radiuses stressed relieved with 2000 degree ceramic fiber and stainless steel wool packed free flow mufflers.
DesignTek X-pipe sports racing catalytic converters give a HORSEPOWER and TORQUE gain to all 997 cars. High Quality T304 SS C.N.C. mandrel bent tubing for maximum exhaust flow.
The Equal length headers reduced backpressure and less restriction.
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MK1 Carrera 4S 3.8L 2005-08
Kit Includes
- Air Induction Kit
- Plenum by IPD
- Throttle Body 82mm
- Exhaust Cat back
- Sports Cats 200 cell
- Sports Headers
- Gaskets & Clamps
BIG BORE Stage 2 Performance exhaust package. High Grade stainless steel exhaust system for Porsche 996. 14 - 16 gauge T304.
For the ultimate performance gains we recommend this set is fitted with an ECU remap giving BHP and Torque that you can really feel and superb sports car sound.
Note: The Plenum is only for CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY 996 CABLE THROTTLE CARS
NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.
For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.
If you are located outside the UK, please check your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
POWERKIT9961
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005

Dyno tested power gains with our ECU remap archiving and extra +30Bhp To read more about this power increase Click Here
IPD
Porsche has been controlling engine output by restricting the inlet track for decades. This has been successfully accomplished by utilizing smaller throttle bodies. This simple power control solution has been a very effective way of preventing lower level models from out performing certain flagship models, especially models with prolific racing pedigree. Although the factory engine packages are fantastic performance machines, they are engineered and developed to achieve specific performance numbers that satisfy a target demographic and compete with rival brands. Unfortunately driving enthusiasts who seek an elevated Porsche driving experience require performance levels well outside the target market.
Power improvements will be fully realized once the factory ECU/DME makes all the necessary "adaptation" requirements. This process can be expedited with a series of "hard pulls" or spirited full throttle acceleration runs through the gears. Of course this should only be performed on a closed course circuit.
Induction Kit
Engineered for maximum power and sound. This engineered system eliminates the OEM restrictive airbox and incorporates a high flow cone air filter and sealed fresh air chamber. A cone filter has superior air flow characteristics as compared to flat panel filters. The cone filter better shapes the air as it enters through the filter for smoother straighter more formed air. Next, we have CMC machined a MAF housing to the exact tolerances of the OEM housing for precise MAF reading and NO CHECK ENGINE LIGHTS. In addition, the sealed air chamber sections off the cone air filter from the engine compartment so that it can only draw cool outside air for more power. Finally, the system is injected molded from crosslink polyethylene which has the lowest thermal conductivity rating of any single-layered moldable material available on the market today. This is key in keeping intake temperatures low and increasing power.
Fits:
Porsche 997 Carrera
Porsche 996 Carrera*
(*FOR CARS WITH "ELECTRONIC ACCELERATOR (M620)" NOT FOR EARLY CABLE THROTTLE CARS)
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT99602
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MK1 Carrera 4 3.6L 2005-08