IPD
About IPD
Innovative Pro Design (IPD) was founded in 2004 by Mike "Turbo" Kirakosyan. The IPD Plenums were conceived, developed, tested, proven and manufactured in the heart of the Porsche Tuning capital, Southern California.
The IPD plenums evolved from the age old hot rod philosophy of "never leave good enough alone". The genius behind the IPD Intake Plenums is not only the patented "Y" design but also the geometry of diversion areas, optimization of bore sizes and internal surface area manipulation.
91600
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91600
The product you are viewing cross references to these numbers
Product Information
Carbon Intake Plenum High Flow Y Pipe. Fits:
Porsche 991.1 turbo
Porsche 991.1 turbo S
Our brand new 991 Carbon Y-Pipes are designed and engineered to deliver substantial net horsepower and torque gains across both power curves, but without the weight penalty of cast aluminum construction. These lightweight Y-Pipes are inspired and modeled after our proven 991 Turbo Y-Pipes featuring slightly larger “non-round” runners and optimized merge collector areas that dramatically improve intake air flow and overall engine performance for both stock and highly modified Turbos.
In determining the scope of change for our next generation Y pipes we considered a multitude of materials, manufacturing processes, and shapes. In the end, we determined that by using a composite, we could achieve a reduced wall thicknesses without the penalty of casting shift. The result was more cross-sectional area and therefore more air flow. But we didn’t stop there. We sought out an experienced manufacturing partner with a background in pinnacle level motorsports and insisted on using the highest quality UV stable structural pre-preg composite with an autoclave cure. Because the finish of the outside is important for hose fit and aesthetics, we built the parts with female tools. However, we didn’t want to compromise the internal geometry with typical folds and wrinkles found with a vacuum bag layup, so we invested in bladder tooling to ensure a uniform and smooth internal surface. The side benefit of this aerospace grade process and material was 75% less weight of the part which sits behind the axle center line making it an important contributor to the handling and dynamics of rear engine cars.
The superior design, materials and construction of our Carbon Y-Pipes deliver the same impressive gains of 40+ wheel HP and 50+ wheel TQ, but benefit from substantial weight reduction for Turbo clients who demand top tier level motorsport components and quality for their 991 Turbos and GT2RS’s.
Just like all IPD products, our 991 Carbon Turbo Y-Pipes are designed, manufactured, and assembled here in the USA.
The 991 Carbon Turbo Y-Pipes are a direct bolt-on engine upgrade that
require no modifications.
We strongly recommend that an experienced Porsche technician who is familiar with the 991 platform perform the installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91600
99111005070
99111005071
99111005072
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
£2,080.00 inc. VAT
Now £1,976.00 inc. VAT
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
91600.GT2
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91600.GT2
The product you are viewing cross references to these numbers
Product Information
Carbon Intake Plenum High Flow Y Pipe.
Fits
Porsche 991.2 GT2 RS
Our brand new 991 Carbon Y-Pipes are designed and engineered to deliver substantial net horsepower and torque gains across both power curves, but without the weight penalty of cast aluminum construction. These lightweight Y-Pipes are inspired and modeled after our proven 991 Turbo Y-Pipes featuring slightly larger “non-round” runners and optimized merge collector areas that dramatically improve intake air flow and overall engine performance for both stock and highly modified Turbos.
In determining the scope of change for our next generation Y pipes we considered a multitude of materials, manufacturing processes, and shapes. In the end, we determined that by using a composite, we could achieve a reduced wall thicknesses without the penalty of casting shift. The result was more cross-sectional area and therefore more air flow. But we didn’t stop there. We sought out an experienced manufacturing partner with a background in pinnacle level motorsports and insisted on using the highest quality UV stable structural prepreg composite with an autoclave cure. Because the finish of the outside is important for hose fit and aesthetics, we built the parts with female tools. However, we didn’t want to compromise the internal geometry with typical folds and wrinkles found with a vacuum bag layup, so we invested in bladder tooling to ensure a uniform and smooth internal surface. The side benefit of this aerospace grade process and material was 75% less weight of the part which sits behind the axle center line making it an important contributor to the handling and dynamics of rear engine cars.
The superior design, materials and construction of our Carbon Y-Pipes deliver the same impressive gains of 40+ wheel HP and 50+ wheel TQ, but benefit from substantial weight reduction for Turbo clients who demand top tier level motorsport components and quality for their 991 Turbos and GT2RS’s.
Just like all IPD products, our 991 Carbon Turbo Y-Pipes are designed, manufactured, and assembled here in the USA.
The 991 Carbon Turbo Y-Pipes are a direct bolt-on engine upgrade that
require no modifications.
We strongly recommend that an experienced Porsche technician who is familiar with the 991 platform perform the installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91600.GT2
99111007080
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
£2,080.00 inc. VAT
Now £1,976.00 inc. VAT
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
91600.2
Product Information
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91600.2
The product you are viewing cross references to these numbers
Product Information
Carbon Intake Plenum High Flow Y Pipe. Fits:
Porsche 991.2 turbo
Porsche 991.2 turbo S
Our brand new 991 Carbon Y-Pipes are designed and engineered to deliver substantial net horsepower and torque gains across both power curves, but without the weight penalty of cast aluminum construction. These lightweight Y-Pipes are inspired and modeled after our proven 991 Turbo Y-Pipes featuring slightly larger “non-round” runners and optimized merge collector areas that dramatically improve intake air flow and overall engine performance for both stock and highly modified Turbos.
In determining the scope of change for our next generation Y pipes we considered a multitude of materials, manufacturing processes, and shapes. In the end, we determined that by using a composite, we could achieve a reduced wall thicknesses without the penalty of casting shift. The result was more cross-sectional area and therefore more air flow. But we didn’t stop there. We sought out an experienced manufacturing partner with a background in pinnacle level motorsports and insisted on using the highest quality UV stable structural prepreg composite with an autoclave cure. Because the finish of the outside is important for hose fit and aesthetics, we built the parts with female tools. However, we didn’t want to compromise the internal geometry with typical folds and wrinkles found with a vacuum bag layup, so we invested in bladder tooling to ensure a uniform and smooth internal surface. The side benefit of this aerospace grade process and material was 75% less weight of the part which sits behind the axle center line making it an important contributor to the handling and dynamics of rear engine cars.
The superior design, materials and construction of our Carbon Y-Pipes deliver the same impressive gains of 40+ wheel HP and 50+ wheel TQ, but benefit from substantial weight reduction for Turbo clients who demand top tier level motorsport components and quality for their 991 Turbos and GT2RS’s.
Just like all IPD products, our 991 Carbon Turbo Y-Pipes are designed, manufactured, and assembled here in the USA.
The 991 Carbon Turbo Y-Pipes are a direct bolt-on engine upgrade that
require no modifications.
We strongly recommend that an experienced Porsche technician who is familiar with the 991 platform perform the installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91600.2
99111007070
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£2,080.00 inc. VAT
Now £1,976.00 inc. VAT
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
92274-3.7
Product Information
Fits:
Porsche 992.1 Turbo / Turbo S 3.7L
The 992 Turbo engine is another modern marvel from Porsche. We were fortunate enough to have unlimited access to a 992 during our extensive development and testing program. This unrestricted time frame proved to be invaluable, allowing IPD to scrutinize every engineering and design aspect in an effort to deliver the best performing Plenum possible.
Like all previous IPD Turbo Plenums, the 992 Plenum is a product of efficiency that produces substantial HP and TQ gains through a superior and patented "Y" design that manages and delivers optimized air flow for enhanced engine performance. The Plenum has been proven to produce substantial net gains across both power bands and is guaranteed to elevate the driving experience of any Turbo.
Development started with a 1D simulation to optimize the treatment of pulse peaks in the intake tract using different pipe geometry and known engine parameters of the 992. We then graduated to optimizing 2D slices of the plenum in CFD, paying special attention to places where adverse pressure gradients that might cause separation. This allowed us to adjust curvatures on the plenum faces and build up our understanding of what was happening inside the pipe at full throttle.
After we were pleased with the 2D slices we graduated to 3D adding in all the geometry to make this a plug and play bolt-on part with optimal performance characteristics. After hundreds of geometrical and CFD iterations, we were pleased with not-only the increase in mass flow compared to the stock intake, but also the uniformity of the charge pressure and velocity across the 2 branches.
The efficiencies of the Plenum dramatically reduce initial turbo lag down low helping access the power and torque sooner, but the bulk of the power and torque gains are realized from 4000 rpm to redline, where we need and enjoy it most. The HP and TQ gains continue to increase and out-perform the factory air distributor as you climb through the revs. Peak gains of 35+ wheel HP and 35+ wheel TQ are achieved above 6000 rpm. The 992 Turbo Plenum delivers very impressive power and torque gains that will raise the performance bar of the already potent Turbo as well as raise the hairs on the back of your neck.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92274-3.7
The product you are viewing cross references to these numbers
Product Information
Aluminum intake plenum, 74mm IPD Plenum ('20-Current).Fits:
Porsche 992.1 Turbo / Turbo S 3.7L
The 992 Turbo engine is another modern marvel from Porsche. We were fortunate enough to have unlimited access to a 992 during our extensive development and testing program. This unrestricted time frame proved to be invaluable, allowing IPD to scrutinize every engineering and design aspect in an effort to deliver the best performing Plenum possible.
Like all previous IPD Turbo Plenums, the 992 Plenum is a product of efficiency that produces substantial HP and TQ gains through a superior and patented "Y" design that manages and delivers optimized air flow for enhanced engine performance. The Plenum has been proven to produce substantial net gains across both power bands and is guaranteed to elevate the driving experience of any Turbo.
Development started with a 1D simulation to optimize the treatment of pulse peaks in the intake tract using different pipe geometry and known engine parameters of the 992. We then graduated to optimizing 2D slices of the plenum in CFD, paying special attention to places where adverse pressure gradients that might cause separation. This allowed us to adjust curvatures on the plenum faces and build up our understanding of what was happening inside the pipe at full throttle.
After we were pleased with the 2D slices we graduated to 3D adding in all the geometry to make this a plug and play bolt-on part with optimal performance characteristics. After hundreds of geometrical and CFD iterations, we were pleased with not-only the increase in mass flow compared to the stock intake, but also the uniformity of the charge pressure and velocity across the 2 branches.
The efficiencies of the Plenum dramatically reduce initial turbo lag down low helping access the power and torque sooner, but the bulk of the power and torque gains are realized from 4000 rpm to redline, where we need and enjoy it most. The HP and TQ gains continue to increase and out-perform the factory air distributor as you climb through the revs. Peak gains of 35+ wheel HP and 35+ wheel TQ are achieved above 6000 rpm. The 992 Turbo Plenum delivers very impressive power and torque gains that will raise the performance bar of the already potent Turbo as well as raise the hairs on the back of your neck.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92274-3.7
92274-3.7
9A211003702
9A211013702
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 992 Turbo 3.8L
- Porsche 992 Turbo S 3.8L
- Porsche 992 Turbo Cabriolet 3.8L
- Porsche 992 Turbo S Cabriolet 3.8L
£830.00 inc. VAT
Now £788.50 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
91500.2-GT2
Product Information
Fits:
Porsche 991 GT2 RS
The new IPD Y-Pipe delivers the same amazing proven performance as with the previous generation Turbo. Porsche made very few changes to the intake system from the 991 Turbo to the 991.2 Turbo. Ballistic acceleration and a top speed of over 200 mph places the new Turbo in a very elite class of supercars. But of course the IPD Y-Pipe (and Plenum) raise the performance bar even higher for Porsche driving enthusiasts who seek fighter jet performance from their German Turbo missiles.
IPD invested countless hours of R & D with a variety of unique design features and multiple prototype tests before settling on an optimum design that significantly improves engine performance for both stock and highly modified 991 Turbos. Our innovative Y-Pipe design is not only larger but also utilizes "non-round" runners, an optimized merge collector area and our proven dimpled interior surfacing. This superior design delivers greater volume of air, improved laminar flow and increased air velocity. These improvements deliver an additional 40+ wheel HP, 50+ Foot Pounds of Torque, improved boost response and more linear power and torque curves.
As we all know, bigger is not always better when it comes to forced induction applications. The IPD Y-Pipe is considerably larger than the factory but not so large as to cause pressure drop within the intake tract resulting in turbo lag and reduced performance. This optimized "non-round" design with dimpled interior surface cannot be achieved with conventional round tube construction.
The Y-Pipe is a direct bolt-on engine upgrade that requires no modifications but should be perform by an experienced Porsche technician familiar with the 991 platform. Y-Pipes comes with all the required hardware necessary to complete the installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91500.2-GT2
The product you are viewing cross references to these numbers
Product Information
Aluminum Intake Plenum High Flow Y Pipe. Fits:
Porsche 991 GT2 RS
The new IPD Y-Pipe delivers the same amazing proven performance as with the previous generation Turbo. Porsche made very few changes to the intake system from the 991 Turbo to the 991.2 Turbo. Ballistic acceleration and a top speed of over 200 mph places the new Turbo in a very elite class of supercars. But of course the IPD Y-Pipe (and Plenum) raise the performance bar even higher for Porsche driving enthusiasts who seek fighter jet performance from their German Turbo missiles.
IPD invested countless hours of R & D with a variety of unique design features and multiple prototype tests before settling on an optimum design that significantly improves engine performance for both stock and highly modified 991 Turbos. Our innovative Y-Pipe design is not only larger but also utilizes "non-round" runners, an optimized merge collector area and our proven dimpled interior surfacing. This superior design delivers greater volume of air, improved laminar flow and increased air velocity. These improvements deliver an additional 40+ wheel HP, 50+ Foot Pounds of Torque, improved boost response and more linear power and torque curves.
As we all know, bigger is not always better when it comes to forced induction applications. The IPD Y-Pipe is considerably larger than the factory but not so large as to cause pressure drop within the intake tract resulting in turbo lag and reduced performance. This optimized "non-round" design with dimpled interior surface cannot be achieved with conventional round tube construction.
The Y-Pipe is a direct bolt-on engine upgrade that requires no modifications but should be perform by an experienced Porsche technician familiar with the 991 platform. Y-Pipes comes with all the required hardware necessary to complete the installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91500.2-GT2
91500
91500.2
915002
91500.2-GT2
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
£1,163.00 inc. VAT
Now £1,104.85 inc. VAT
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
92274-3.0
Product Information
Fits:
Porsche 992.1 Carrera / S / GTS 3.0L
The new 992 Carrera engine is another modern marvel from Porsche. Although displacement remains unchanged at 3.0L, there are a plethora of upgrades that elevate this new 9A2 Evo engine head and shoulders above the previous 991.2 model engine. We were fortunate enough to have unlimited access to a 992 Carrera S during our extensive development and testing program. This unrestricted time frame proved to be invaluable, allowing IPD to scrutinize every engineering and design aspect in an effort to deliver the best performing Plenum possible.
Like all IPD Plenums, the 992 Plenum is a product of efficiency that produces substantial HP and TQ gains through a superior and patented "Y" design that manages and delivers optimized air flow for enhanced engine performance. The Plenum has been proven to delivered substantial net performance gains across both power bands and is guaranteed to elevate the driving experience of any Carrera.
Development started with a 1D simulation to optimize the treatment of pulse peaks in the intake tract using different pipe geometry and known engine parameters of the 992. We then graduated to optimizing 2D slices of the plenum in CFD, paying special attention to places where adverse pressure gradients that might cause separation. This allowed us to adjust curvatures on the plenum faces and build up our understanding of what was happening inside the pipe at full throttle.
After we were happy with the 2D slices we graduated to 3D adding in all the geometry to make this a plug and play bolt-on part with optimal performance characteristics. After hundreds of geometrical and CFD iterations, we were pleased with not-only the increase in mass flow compared to the stock intake, but also the uniformity of the charge pressure and velocity across the 2 branches.
The efficiencies of the Plenum dramatically reduce initial turbo lag down low helping access the power and torque sooner, but the bulk of the power and torque gains are realized from 4000 rpm to redline, where it is needed and enjoy most. The HP and TQ gains continuing to grow and out-perform the factory air distributor as you climb through the revs. Peak gains of 30+ wheel HP and 25+ wheel TQ are achieved at 6200 rpm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92274-3.0
The product you are viewing cross references to these numbers
Product Information
Aluminum intake plenum.Fits:
Porsche 992.1 Carrera / S / GTS 3.0L
The new 992 Carrera engine is another modern marvel from Porsche. Although displacement remains unchanged at 3.0L, there are a plethora of upgrades that elevate this new 9A2 Evo engine head and shoulders above the previous 991.2 model engine. We were fortunate enough to have unlimited access to a 992 Carrera S during our extensive development and testing program. This unrestricted time frame proved to be invaluable, allowing IPD to scrutinize every engineering and design aspect in an effort to deliver the best performing Plenum possible.
Like all IPD Plenums, the 992 Plenum is a product of efficiency that produces substantial HP and TQ gains through a superior and patented "Y" design that manages and delivers optimized air flow for enhanced engine performance. The Plenum has been proven to delivered substantial net performance gains across both power bands and is guaranteed to elevate the driving experience of any Carrera.
Development started with a 1D simulation to optimize the treatment of pulse peaks in the intake tract using different pipe geometry and known engine parameters of the 992. We then graduated to optimizing 2D slices of the plenum in CFD, paying special attention to places where adverse pressure gradients that might cause separation. This allowed us to adjust curvatures on the plenum faces and build up our understanding of what was happening inside the pipe at full throttle.
After we were happy with the 2D slices we graduated to 3D adding in all the geometry to make this a plug and play bolt-on part with optimal performance characteristics. After hundreds of geometrical and CFD iterations, we were pleased with not-only the increase in mass flow compared to the stock intake, but also the uniformity of the charge pressure and velocity across the 2 branches.
The efficiencies of the Plenum dramatically reduce initial turbo lag down low helping access the power and torque sooner, but the bulk of the power and torque gains are realized from 4000 rpm to redline, where it is needed and enjoy most. The HP and TQ gains continuing to grow and out-perform the factory air distributor as you climb through the revs. Peak gains of 30+ wheel HP and 25+ wheel TQ are achieved at 6200 rpm.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
92274-3.0
92274-3.0
0PB128335A
0PB128335C
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 992 Carrera 2 3.0L
- Porsche 992 Carrera 4 3.0L
- Porsche 992 Carrera 2 Cabriolet 3.0L
- Porsche 992 Carrera 4 Cabriolet 3.0L
- Porsche 992 Carrera 2S 3.0L
- Porsche 992 Carrera 4S 3.0L
- Porsche 992 Carrera 2S Cabriolet 3.0L
- Porsche 992 Carrera 4S Cabriolet 3.0L
- Porsche 992 Targa 4 3.0L
- Porsche 992 Targa 4S 3.0L
£830.00 inc. VAT
Now £788.50 inc. VAT
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
IPDKIT81482-38
Product Information
Includes 82mm throttle body
Fits:
Porsche 981 DFI Cayman Spyder/GT4 (3.8L)
After a very extensive R & D program we are proud to launch the new 981 IPD 82mm Competition Plenums. We only offer "Competition" versions of the 981 Plenums which upgrades the factory 74mm throttle body with the larger 997 GT3 82mm throttle body. This combination has proven to be considerably more popular and deliver even more performance. This Competition version will work with both 3.4L "S" and 2.7L "Non-S" applications.
The 981 intake is nearly identical to the 987.2 intake. Porsche made a few upgrades with the 981, most notably being that the 981 draws outside air from both driver and passenger air intakes instead of the driver's side only as previously found with all 986, 987 and 987.2 applications. IPD has included a custom silicone hose designed to perfectly fit the larger 82mm TB and considerably improve air flow.
The new 981 Plenums also benefits from the internal dimpling effect that we are now implementing on all future Plenums. This internal dimpling allows us to control the boundary layer and maximize air flow. Just like a dimpled golf ball travels farther than a smooth golf ball. Controlled turbulent air creates less friction and "tumbles" over a given area more efficiently.
Power gains with the 981 Competition Plenum are virtually the same as with the 987.2 Competition Plenum, putting down 20 horsepower and 16 foot pounds of torque at the wheels. The bulk of the power gains from the IPD Plenum begin around 4000 rpm, continues all the way through to redline and become fully realized in the 6000 rpm range. IPD performance gains stay above both factory power curves throughout the entire rev range
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT81482-38
The product you are viewing cross references to these numbers
Product Information
Aluminum Intake Plenum kit.Includes 82mm throttle body
Fits:
Porsche 981 DFI Cayman Spyder/GT4 (3.8L)
After a very extensive R & D program we are proud to launch the new 981 IPD 82mm Competition Plenums. We only offer "Competition" versions of the 981 Plenums which upgrades the factory 74mm throttle body with the larger 997 GT3 82mm throttle body. This combination has proven to be considerably more popular and deliver even more performance. This Competition version will work with both 3.4L "S" and 2.7L "Non-S" applications.
The 981 intake is nearly identical to the 987.2 intake. Porsche made a few upgrades with the 981, most notably being that the 981 draws outside air from both driver and passenger air intakes instead of the driver's side only as previously found with all 986, 987 and 987.2 applications. IPD has included a custom silicone hose designed to perfectly fit the larger 82mm TB and considerably improve air flow.
The new 981 Plenums also benefits from the internal dimpling effect that we are now implementing on all future Plenums. This internal dimpling allows us to control the boundary layer and maximize air flow. Just like a dimpled golf ball travels farther than a smooth golf ball. Controlled turbulent air creates less friction and "tumbles" over a given area more efficiently.
Power gains with the 981 Competition Plenum are virtually the same as with the 987.2 Competition Plenum, putting down 20 horsepower and 16 foot pounds of torque at the wheels. The bulk of the power gains from the IPD Plenum begin around 4000 rpm, continues all the way through to redline and become fully realized in the 6000 rpm range. IPD performance gains stay above both factory power curves throughout the entire rev range
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT81482-38
81482
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Aluminum Intake Plenum. Porsche 981 Boxster/Cayman DFI IPD (81482-3.4-3.8
1 x Throttle body 82mm for Porsche (99760511601/1
Vehicle Group
Vehicle Group
- Porsche Cayman GT4 3.8L 2015-16
£1,028.00 inc. VAT
Now £976.60 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
IPDKIT98735
Product Information
Fits:
Porsche 987 GEN1 Cayman S 3.2L
Porsche 987 GEN1 Boxster S 3.2L
987 Competition Cayman 3.2L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 68mm Throttle Body with 74mm Throttle Body
Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's throne. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 74mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT98735
The product you are viewing cross references to these numbers
Product Information
Intake Plenum + 74mm Throttle Body + Induction Kit Porsche 987 Cayman/Boxster S 3.2L IPDFits:
Porsche 987 GEN1 Cayman S 3.2L
Porsche 987 GEN1 Boxster S 3.2L
987 Competition Cayman 3.2L Plenum: HP Gains 20+ / Torque Gains 18 Requires upgrading factory 68mm Throttle Body with 74mm Throttle Body
Recommended to be installed on modified Caymans with Hi-Flow Cat back exhaust
The perfectly balanced mid engine Cayman/Boxster is Germany's canyon carving track meister. Unfortunately, the Cayman/Boxster was delivered slightly under powered from the factory so as not to threaten the Carrera's throne. The Cayman IPD intake plenum delivers increased performance that puts the Cayman/Boxster in the ring with the Carrera.
The IPD Plenum out performs every other intake system on the market. Don't be fooled by other competitors claiming to offer Plenums. All factory Porsche air distributors are of the "T" variety and therefore suffer from less than ideal air flow and intake air speed.
The genius and power behind the IPD plenums comes from the patented "Y" style design and optimized diversion areas to deliver real and impressive power that will transform your Cayman's/Boxster's performance and heighten your Porsche driving experience.
The Cayman/Boxster IPD Intake Plenums are available in 3 versions, each one specifically designed to meet the performance requirements of varying Cayman/Boxster enthusiasts. IPD offers the ultimate Cayman/Boxster performance upgrades, all the way from mild to wild.
The IPD Cayman/Boxster "Competition" Plenum was designed to meet the needs of the most demanding Cayman/Boxster S enthusiasts. The "Competition" Plenums is even larger and utilizes the 74mm throttle body allowing it to deliver even greater air flow and substantial increases in performance.
The "Competition" version is designed to work with both bone stock Caymans/Boxsters but produces even more horsepower gains (20+) with Caymans/Boxsters already equipped with after market "cat back" high flow performance exhaust and other performance mods.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT98735
87182
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Aluminum Intake Plenum 74mm. Porsche 987 Boxster S 3.2L IPD (87174-3.2
1 x Throttle body 74mm for Porsche (99760511502/1
1 x Air Induction Kit for Porsche Boxster 987 / Cayman DesignTek (3603109871
Vehicle Group
Vehicle Group
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman S 3.4L 987C 2005-08
£1,013.00 inc. VAT
Now £962.35 inc. VAT
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
IPDKIT81482-34
Product Information
Incudes 82mm throttle body
Fits:
Porsche 981 DFI Cayman/S/GTS (3.4L)
After a very extensive R & D program we are proud to launch the new 981 IPD 82mm Competition Plenums. We only offer "Competition" versions of the 981 Plenums which upgrades the factory 74mm throttle body with the larger 997 GT3 82mm throttle body. This combination has proven to be considerably more popular and deliver even more performance. This Competition version will work with both 3.4L "S" and 2.7L "Non-S" applications.
The 981 intake is nearly identical to the 987.2 intake. Porsche made a few upgrades with the 981, most notably being that the 981 draws outside air from both driver and passenger air intakes instead of the driver's side only as previously found with all 986, 987 and 987.2 applications. IPD has included a custom silicone hose designed to perfectly fit the larger 82mm TB and considerably improve air flow.
The new 981 Plenums also benefits from the internal dimpling effect that we are now implementing on all future Plenums. This internal dimpling allows us to control the boundary layer and maximize air flow. Just like a dimpled golf ball travels farther than a smooth golf ball. Controlled turbulent air creates less friction and "tumbles" over a given area more efficiently.
Power gains with the 981 Competition Plenum are virtually the same as with the 987.2 Competition Plenum, putting down 20 horsepower and 16 foot pounds of torque at the wheels. The bulk of the power gains from the IPD Plenum begin around 4000 rpm, continues all the way through to redline and become fully realized in the 6000 rpm range. IPD performance gains stay above both factory power curves throughout the entire rev range
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT81482-34
The product you are viewing cross references to these numbers
Product Information
Aluminum Intake Plenum kit.Incudes 82mm throttle body
Fits:
Porsche 981 DFI Cayman/S/GTS (3.4L)
After a very extensive R & D program we are proud to launch the new 981 IPD 82mm Competition Plenums. We only offer "Competition" versions of the 981 Plenums which upgrades the factory 74mm throttle body with the larger 997 GT3 82mm throttle body. This combination has proven to be considerably more popular and deliver even more performance. This Competition version will work with both 3.4L "S" and 2.7L "Non-S" applications.
The 981 intake is nearly identical to the 987.2 intake. Porsche made a few upgrades with the 981, most notably being that the 981 draws outside air from both driver and passenger air intakes instead of the driver's side only as previously found with all 986, 987 and 987.2 applications. IPD has included a custom silicone hose designed to perfectly fit the larger 82mm TB and considerably improve air flow.
The new 981 Plenums also benefits from the internal dimpling effect that we are now implementing on all future Plenums. This internal dimpling allows us to control the boundary layer and maximize air flow. Just like a dimpled golf ball travels farther than a smooth golf ball. Controlled turbulent air creates less friction and "tumbles" over a given area more efficiently.
Power gains with the 981 Competition Plenum are virtually the same as with the 987.2 Competition Plenum, putting down 20 horsepower and 16 foot pounds of torque at the wheels. The bulk of the power gains from the IPD Plenum begin around 4000 rpm, continues all the way through to redline and become fully realized in the 6000 rpm range. IPD performance gains stay above both factory power curves throughout the entire rev range
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
IPDKIT81482-34
81482
The product you are viewing cross references to these numbers
About kit
This kit is comprised of the following items:
1 x Aluminum Intake Plenum. Porsche 981 Boxster/Cayman DFI IPD (81482-3.4-3.8
1 x Throttle body 82mm for Porsche (99760511601/1
Vehicle Group
Vehicle Group
- Porsche Cayman S 3.4L 981 2013-16
£1,028.00 inc. VAT
Now £976.60 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
91274-3.0
Product Information
Fits:
Porsche 991.2 Carrera /S / 4S / GTS
The new 991.2 turbocharged Carrera Plenums are now available for new Carrera drivers looking to raise the performance bar of their 3.0L turbo engines. The Carrera Plenum is very similar to the Turbo Plenum with only minor modifications to the hardware package. No official testing has been conducted as of yet but based on past experience and customer feedback we expect power gains to be in the mid 30+ range and torque over 40. Stay tuned for dyno testing coming as soon as we get our hands on a test car.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91274-3.0
The product you are viewing cross references to these numbers
Product Information
Aluminum Turbo IPD Plenum. Fits:
Porsche 991.2 Carrera /S / 4S / GTS
The new 991.2 turbocharged Carrera Plenums are now available for new Carrera drivers looking to raise the performance bar of their 3.0L turbo engines. The Carrera Plenum is very similar to the Turbo Plenum with only minor modifications to the hardware package. No official testing has been conducted as of yet but based on past experience and customer feedback we expect power gains to be in the mid 30+ range and torque over 40. Stay tuned for dyno testing coming as soon as we get our hands on a test car.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91274-3.0
91274
91274-3.0
9127430
9A211013702
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera 2 3.0L (370 Bhp)
- Porsche 991 Carrera 2S 3.0L (420 Bhp)
- Porsche 991 Carrera 4 3.0L (370 Bhp)
- Porsche 991 Carrera 4S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 2 3.0L (370 Bhp)
- Porsche 991 Cabriolet 2S 3.0L (420 Bhp)
- Porsche 991 Cabriolet 4 3.0L (370 Bhp)
- Porsche 991 Cabriolet 4S 3.0L (420 Bhp)
- Porsche 991 Targa 4 3.0L (370 Bhp)
- Porsche 991 Targa 4S 3.0L (420 Bhp)
£830.00 inc. VAT
Now £788.50 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
91274.2
Product Information
Fits:
Porsche 991.2 Turbo /S
Porsche GT2 RS
IPD took delivery of its 991.2 Turbo S and the R & D started the second it arrived at its new home. The new Turbo doesn't substantially benefit from any one particular upgrade, but the sum of its improvements deliver a superior overall Turbo compared to the already impressive 991.1 Turbo it replaces. Yes, we know the latest Turbo is faster with 20 more horsepower but it's the combination of lightening shifts, razor sharp handling and spiritual connection to the vehicle that elevates the driving experience of the extraordinary new 991.2 Turbo.
Porsche made a number of substantial upgrades with the latest 991.2 Turbo. Engine improvements include revised intake ports, larger injectors, higher volume fuel pump, larger turbo compressor wheels and more efficient intercoolers, but the factory intake system remained relatively unchanged allowing the IPD Plenum and Y-Pipe to fit with only minor modifications.
The 991.2 Turbo Plenum upgrade delivers staggering engine power and torque gains that will raise the performance bar of the already potent supercar as well as the hairs on your neck. Horsepower gains are found throughout the entire power band with the bulk of the gains being realized between the 3500-5000 RPM range. Max power gains of 45+ wheel HP come in at 4300 RPM and hold strong all the way to redline. Torque is even more impressive at 60+ in the midrange with a massive torque gains from 3500-5000 RPM.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91274.2
The product you are viewing cross references to these numbers
Product Information
IPD Aluminium Intake Plenum. 74mm.Fits:
Porsche 991.2 Turbo /S
Porsche GT2 RS
IPD took delivery of its 991.2 Turbo S and the R & D started the second it arrived at its new home. The new Turbo doesn't substantially benefit from any one particular upgrade, but the sum of its improvements deliver a superior overall Turbo compared to the already impressive 991.1 Turbo it replaces. Yes, we know the latest Turbo is faster with 20 more horsepower but it's the combination of lightening shifts, razor sharp handling and spiritual connection to the vehicle that elevates the driving experience of the extraordinary new 991.2 Turbo.
Porsche made a number of substantial upgrades with the latest 991.2 Turbo. Engine improvements include revised intake ports, larger injectors, higher volume fuel pump, larger turbo compressor wheels and more efficient intercoolers, but the factory intake system remained relatively unchanged allowing the IPD Plenum and Y-Pipe to fit with only minor modifications.
The 991.2 Turbo Plenum upgrade delivers staggering engine power and torque gains that will raise the performance bar of the already potent supercar as well as the hairs on your neck. Horsepower gains are found throughout the entire power band with the bulk of the gains being realized between the 3500-5000 RPM range. Max power gains of 45+ wheel HP come in at 4300 RPM and hold strong all the way to redline. Torque is even more impressive at 60+ in the midrange with a massive torque gains from 3500-5000 RPM.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91274.2
91274
9A111003702
9A211013702
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
- Porsche 991 GT2 RS 3.8L PDK (700 bhp)
£830.00 inc. VAT
Now £788.50 inc. VAT
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
91500.2
Product Information
Fits:
Porsche 991.2 Turbo /S
The new Turbo IPD Y-Pipe delivers the same amazing proven performance as with the previous generation Turbo. Porsche made very few changes to the intake system from the 991 Turbo to the 991.2 Turbo. Ballistic acceleration and a top speed of over 200 mph places the new Turbo in a very elite class of supercars. But of course the IPD Y-Pipe (and Plenum) raise the performance bar even higher for Porsche driving enthusiasts who seek fighter jet performance from their German Turbo missiles.
IPD invested countless hours of R & D with a variety of unique design features and multiple prototype tests before settling on an optimum design that significantly improves engine performance for both stock and highly modified 991 Turbos. Our innovative Y-Pipe design is not only larger but also utilizes "non-round" runners, an optimized merge collector area and our proven dimpled interior surfacing. This superior design delivers greater volume of air, improved laminar flow and increased air velocity. These improvements deliver an additional 40+ wheel HP, 50+ Foot Pounds of Torque, improved boost response and more linear power and torque curves.
As we all know, bigger is not always better when it comes to forced induction applications. The IPD Y-Pipe is considerably larger than the factory but not so large as to cause pressure drop within the intake tract resulting in turbo lag and reduced performance. This optimized "non-round" design with dimpled interior surface cannot be achieved with conventional round tube construction.
The 991 Turbo Y-Pipe is a direct bolt-on engine upgrade that requires no modifications but should be perform by an experienced Porsche technician familiar with the 991 platform. Y-Pipes comes with all the required hardware necessary to complete the installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91500.2
The product you are viewing cross references to these numbers
Product Information
Aluminum Intake Plenum High Flow Y Pipe. Fits:
Porsche 991.2 Turbo /S
The new Turbo IPD Y-Pipe delivers the same amazing proven performance as with the previous generation Turbo. Porsche made very few changes to the intake system from the 991 Turbo to the 991.2 Turbo. Ballistic acceleration and a top speed of over 200 mph places the new Turbo in a very elite class of supercars. But of course the IPD Y-Pipe (and Plenum) raise the performance bar even higher for Porsche driving enthusiasts who seek fighter jet performance from their German Turbo missiles.
IPD invested countless hours of R & D with a variety of unique design features and multiple prototype tests before settling on an optimum design that significantly improves engine performance for both stock and highly modified 991 Turbos. Our innovative Y-Pipe design is not only larger but also utilizes "non-round" runners, an optimized merge collector area and our proven dimpled interior surfacing. This superior design delivers greater volume of air, improved laminar flow and increased air velocity. These improvements deliver an additional 40+ wheel HP, 50+ Foot Pounds of Torque, improved boost response and more linear power and torque curves.
As we all know, bigger is not always better when it comes to forced induction applications. The IPD Y-Pipe is considerably larger than the factory but not so large as to cause pressure drop within the intake tract resulting in turbo lag and reduced performance. This optimized "non-round" design with dimpled interior surface cannot be achieved with conventional round tube construction.
The 991 Turbo Y-Pipe is a direct bolt-on engine upgrade that requires no modifications but should be perform by an experienced Porsche technician familiar with the 991 platform. Y-Pipes comes with all the required hardware necessary to complete the installation.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91500.2
91500
91500.2
915002
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Turbo Coupe 3.8L (540 Bhp)
- Porsche 991 Turbo S Coupe 3.8L (580 Bhp)
- Porsche 991 Turbo Cabriolet 3.8L (540 Bhp)
- Porsche 991 Turbo S Cabriolet 3.8L (580 Bhp)
£1,162.50 inc. VAT
Now £1,104.37 inc. VAT
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
91500
Product Information
As we all know, bigger is not always better when it comes to forced induction applications. The IPD Y-Pipe is considerably larger than the factory but not so large as to cause pressure drop within the intake tract resulting in turbo lag and reduced performance. This optimized "no-round" design with dimpled interior surface cannot be achieved with conventional round tube construction.
The 991 Turbo Y-Pipe is a direct bolt-on engine upgrade that requires no modifications but should be perform by an experienced Porsche technician familiar with the 991 platform. Y-Pipes comes with all the required hardware necessary to complete the installation.
Fits:
Porsche 991 Turbo /S
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91500
The product you are viewing cross references to these numbers
Product Information
TIPD invested countless hours of R & D with a variety of unique design features and multiple prototype tests before settling on an optimum design that significantly improves engine performance for both stock and highly modified 991 Turbos. Our innovative Y-Pipe design is not only larger but also utilizes "non-round" runners, an optimized merge collector area and our proven dimpled interior surfacing. This superior design delivers greater volume of air, improved laminar flow and increased air velocity. These improvements deliver an additional 35+ wheel HP, 40+ Foot Pounds of Torque, improved boost response and more linear power and torque curves.As we all know, bigger is not always better when it comes to forced induction applications. The IPD Y-Pipe is considerably larger than the factory but not so large as to cause pressure drop within the intake tract resulting in turbo lag and reduced performance. This optimized "no-round" design with dimpled interior surface cannot be achieved with conventional round tube construction.
The 991 Turbo Y-Pipe is a direct bolt-on engine upgrade that requires no modifications but should be perform by an experienced Porsche technician familiar with the 991 platform. Y-Pipes comes with all the required hardware necessary to complete the installation.
Fits:
Porsche 991 Turbo /S
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91500
91500
99111005070
99111005071
99111005072
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
£1,163.00 inc. VAT
Now £1,104.85 inc. VAT
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
91482-3.4
Product Information
Porsche 991 Carrera DFI 3.4L
The new 991 Carrera is arguably one of the sexiest Porsches to come out of Stuttgart in recent years. But like most Carreras, power output is controlled to meet a "performance target" that satisfies the masses and not the dedicated Porsche driving enthusiasts. IPD is here to scratch that proverbial performance itch for those Porsche drivers looking to elevate the already visceral Porsche driving experience to the next level.
The engine in the new 991 remains relatively unchanged from the previous 997.2 Carrera. The 991 Carrera continues to employs the 82mm throttle body just like the Carrera before it. This means there is no "Competition Plenum" available since the 82mm TB is still the largest TB available from Porsche.
Performance gains remain at 14+ horsepower at the wheels. As with most IPD Plenums, the bulk of the power gains are realized in the mid-range where they are most used and enjoyed. Unlike other mods, the IPD Plenums deliver net power gains across the entire rev range.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91482-3.4
The product you are viewing cross references to these numbers
Product Information
IPD Aluminum Intake Plenum.
Porsche 991 Carrera DFI 3.4L
The new 991 Carrera is arguably one of the sexiest Porsches to come out of Stuttgart in recent years. But like most Carreras, power output is controlled to meet a "performance target" that satisfies the masses and not the dedicated Porsche driving enthusiasts. IPD is here to scratch that proverbial performance itch for those Porsche drivers looking to elevate the already visceral Porsche driving experience to the next level.
The engine in the new 991 remains relatively unchanged from the previous 997.2 Carrera. The 991 Carrera continues to employs the 82mm throttle body just like the Carrera before it. This means there is no "Competition Plenum" available since the 82mm TB is still the largest TB available from Porsche.
Performance gains remain at 14+ horsepower at the wheels. As with most IPD Plenums, the bulk of the power gains are realized in the mid-range where they are most used and enjoyed. Unlike other mods, the IPD Plenums deliver net power gains across the entire rev range.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91482-3.4
91482
9A111002110
9A111002111
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Carrera C2 3.4L (350Bhp)
- Porsche 991 Carrera C4 3.4L (350Bhp)
£813.00 inc. VAT
Now £772.35 inc. VAT
In Stock - 24 Hour Dispatch
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
91274
Product Information
The new 991 IPD Turbo Plenum is nearly identical to the previous 997.2 Turbo Plenums. The new IPD Turbo Plenum is offered in one single 74mm version which utilizes the factory 74mm throttle body. The 991 Turbo intake manifolds are smaller than the 997.1 Turbo manifolds which is great for improved boost response and gas mileage but less than ideal for making substantial power gains. The 74mm TB provides more than adequate flow for these more restrictive intake runners eliminating the need for a larger 82mm "Competition" version.
The already explosive power of the 991 Turbo can be further increased with the new 991 Turbo IPD Intake Plenum. The patented IPD Plenum design works exceptionally well with all forced induction applications and the 991 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay well above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed, most critical and most enjoyed.
The 991 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
The 991 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or a series of spirited driving sessions, which of course IPD recommends only be performed on a closed course circuit. Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Fits:
Porsche 991.1 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91274
The product you are viewing cross references to these numbers
Product Information
The incredible 991 Porsche Turbo received a completely redesigned exterior but the engine remained virtually identical to the previous model 997.2 Turbo. This latest Turbo is the most powerful, revolutionary and capable Porsche Turbo to ever come out of Stuttgart. This latest generation Turbo engine, titled the 9A1, delivers 520 HP (560 HP with the "S") and once again, raises the proverbial performance bar in the sports car world.The new 991 IPD Turbo Plenum is nearly identical to the previous 997.2 Turbo Plenums. The new IPD Turbo Plenum is offered in one single 74mm version which utilizes the factory 74mm throttle body. The 991 Turbo intake manifolds are smaller than the 997.1 Turbo manifolds which is great for improved boost response and gas mileage but less than ideal for making substantial power gains. The 74mm TB provides more than adequate flow for these more restrictive intake runners eliminating the need for a larger 82mm "Competition" version.
The already explosive power of the 991 Turbo can be further increased with the new 991 Turbo IPD Intake Plenum. The patented IPD Plenum design works exceptionally well with all forced induction applications and the 991 Turbo is no exception. Power and torque increases provided by the IPD plenum are impressive and stay well above all factory power curves from launch to redline. Maximum power increases take place in the midrange where it's most needed, most critical and most enjoyed.
The 991 Turbo plenums deliver smooth and linear power with considerably quicker boost response creating a longer and more desirable power band. The Turbo plenums deliver reliable performance for both street and motorsport applications enhancing the already visceral Porsche Turbo driving experience.
The 991 Turbo requires an "adaptation" period that can be fully realized with either a series of hard pulls on the dyno or a series of spirited driving sessions, which of course IPD recommends only be performed on a closed course circuit. Installation of all Turbo Plenums is highly recommended to be performed by qualified and trained Porsche technicians.
Fits:
Porsche 991.1 Turbo
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
91274
91274
9A111003770
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche 991 Turbo 3.8L (520bhp)
- Porsche 991 Turbo S 3.8L (560Bhp)
£830.00 inc. VAT
Now £788.50 inc. VAT
Orderable - 10 to 14 Days
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
81482
Product Information
Fits:
Porsche 981 Cayman 3.4L / S / GTS / GT4 3.8L DFI
Porsche 981 Cayman DFI 2.7L
Porsche 981 Boxster/S/GTS/Spyder DFI 3.4L
Porsche 981 Boxster DFI 2.7L
After a very extensive R & D program we are proud to launch the new 981 IPD 82mm Competition Plenums. We only offer "Competition" versions of the 981 Plenums which upgrades the factory 74mm throttle body with the larger 997 GT3 82mm throttle body. This combination has proven to be considerably more popular and deliver even more performance. This Competition version will work with both 3.4L "S" and 2.7L "Non-S" applications.
The 981 intake is nearly identical to the 987.2 intake. Porsche made a few upgrades with the 981, most notably being that the 981 draws outside air from both driver and passenger air intakes instead of the driver's side only as previously found with all 986, 987 and 987.2 applications. IPD has included a custom silicone hose designed to perfectly fit the larger 82mm TB and considerably improve air flow.
The new 981 Plenums also benefits from the internal dimpling effect that we are now implementing on all future Plenums. This internal dimpling allows us to control the boundary layer and maximize air flow. Just like a dimpled golf ball travels farther than a smooth golf ball. Controlled turbulent air creates less friction and "tumbles" over a given area more efficiently.
Power gains with the 981 Competition Plenum are virtually the same as with the 987.2 Competition Plenum, putting down 20 horsepower and 16 foot pounds of torque at the wheels. The bulk of the power gains from the IPD Plenum begin around 4000 rpm, continues all the way through to redline and become fully realized in the 6000 rpm range. IPD performance gains stay above both factory power curves throughout the entire rev range
Requires 997 GT3 82mm throttle body
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
81482
The product you are viewing cross references to these numbers
Product Information
IPD Aluminum Intake Plenum.Fits:
Porsche 981 Cayman 3.4L / S / GTS / GT4 3.8L DFI
Porsche 981 Cayman DFI 2.7L
Porsche 981 Boxster/S/GTS/Spyder DFI 3.4L
Porsche 981 Boxster DFI 2.7L
After a very extensive R & D program we are proud to launch the new 981 IPD 82mm Competition Plenums. We only offer "Competition" versions of the 981 Plenums which upgrades the factory 74mm throttle body with the larger 997 GT3 82mm throttle body. This combination has proven to be considerably more popular and deliver even more performance. This Competition version will work with both 3.4L "S" and 2.7L "Non-S" applications.
The 981 intake is nearly identical to the 987.2 intake. Porsche made a few upgrades with the 981, most notably being that the 981 draws outside air from both driver and passenger air intakes instead of the driver's side only as previously found with all 986, 987 and 987.2 applications. IPD has included a custom silicone hose designed to perfectly fit the larger 82mm TB and considerably improve air flow.
The new 981 Plenums also benefits from the internal dimpling effect that we are now implementing on all future Plenums. This internal dimpling allows us to control the boundary layer and maximize air flow. Just like a dimpled golf ball travels farther than a smooth golf ball. Controlled turbulent air creates less friction and "tumbles" over a given area more efficiently.
Power gains with the 981 Competition Plenum are virtually the same as with the 987.2 Competition Plenum, putting down 20 horsepower and 16 foot pounds of torque at the wheels. The bulk of the power gains from the IPD Plenum begin around 4000 rpm, continues all the way through to redline and become fully realized in the 6000 rpm range. IPD performance gains stay above both factory power curves throughout the entire rev range
Requires 997 GT3 82mm throttle body
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
81482
81482
9A111012025
9A111012026
9A111012030
The product you are viewing cross references to these numbers
Vehicle Group
Vehicle Group
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster S 981 3.4L 2012-16
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Choose your engine size
Prices from: £831.25 inc. VAT
Shop Securely
12 Month Warranty
Worldwide Delivery
Request a
Trade Price Match
