H&R

H&R Sway Bar bushes (PAIR)

Front & Rear Anti Roll Bar:
- Front - 26mm 
- Rear - 22mm 

Fits:
Anti roll bar kit  33511-1


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

33511

The product you are viewing cross references to these numbers

Cancellation module kit for PASM 

Fits:  
Porsche 987.1 Boxster / Boxster S - 2005 to 2008
Porsche 987.2 Boxster / Boxster S - 2009 to 2012
Porsche 987.1 Cayman / Cayman S - 2006 to 2008
Porsche 987.2 Cayman / Cayman S - 2009 to 2012
Porsche 987.2 Cayman R - 2009 to 2012

Electronically controlled shock absorbers are becoming more common, but there is also often the call for a more sporty set-up. And while the installation of a conventional aftermarket system is a technically very smooth process, there may be some irritating error messages because the electronic damper control doesn't get a grip on it. H&R cancellation kits prevent error messages of the on-board electronics, however, the function of the control unit remains fully intact.

The modules deactivate the standard electronic damper control and thus make the new suspension effective. 

Cancellation module kit for PASM - Cabriolet only

Fits:  
Porsche 997.1 Carrera 2 / Carrera 4 - 2005 to 2008
Porsche 997.1 Carrera 2S / Carrera 4S - 2005 to 2008
Porsche 997.1 turbo - 2007 to 2008
Porsche 997.2 Carrera 2 / Carrera 4 - 2009 to 2012
Porsche 997.2 Carrera 2S / Carrera 4S - 2009 to 2012
Porsche 997.2 turbo - 2009 to 2012
Cabriolet models only

Electronically controlled shock absorbers are becoming more common, but there is also often the call for a more sporty set-up. And while the installation of a conventional aftermarket system is a technically very smooth process, there may be some irritating error messages because the electronic damper control doesn't get a grip on it. H&R cancellation kits prevent error messages of the on-board electronics, however, the function of the control unit remains fully intact.

The modules deactivate the standard electronic damper control and thus make the new suspension effective. 

Cancellation module kit for PASM - Coupe and Targa only

Fits:  
Porsche 997.1 Carrera 2 / Carrera 4 - 2005 to 2008
Porsche 997.1 Carrera 2S / Carrera 4S - 2005 to 2008
Porsche 997.1 turbo / GT2 - 2007 to 2008
Porsche 997 GT3 / GT3 RS - 2007 to 2012
Porsche 997.2 Carrera 2 / Carrera 4 - 2009 to 2012
Porsche 997.2 Carrera 2S / Carrera 4S - 2009 to 2012
Porsche 997.2 turbo / GT2 - 2009 to 2012
Coupe and Targa models only

Electronically controlled shock absorbers are becoming more common, but there is also often the call for a more sporty set-up. And while the installation of a conventional aftermarket system is a technically very smooth process, there may be some irritating error messages because the electronic damper control doesn't get a grip on it. H&R cancellation kits prevent error messages of the on-board electronics, however, the function of the control unit remains fully intact.

The modules deactivate the standard electronic damper control and thus make the new suspension effective. 

Cancellation module kit for PASM. 

Fits:  
Porsche 955 Cayenne - 2003 to 2006
Porsche 957 Cayenne - 2007 to 2010
Porsche 95B.1 Macan - 2014 to 2018
Porsche 95B.2 Macan - 2019 to 2021

Electronically controlled shock absorbers are becoming more common, but there is also often the call for a more sporty set-up. And while the installation of a conventional aftermarket system is a technically very smooth process, there may be some irritating error messages because the electronic damper control doesn't get a grip on it. H&R cancellation kits prevent error messages of the on-board electronics, however, the function of the control unit remains fully intact.

The modules deactivate the standard electronic damper control and thus make the new suspension effective. 

Cancellation module kit for PASM. 

Fits:  
Porsche 718 Cayman GT4 - 2019 to 2024
Porsche 991 GT3 - 2012 to 2019
Porsche 991 GT3 RS - 2012 to 2019
Porsche 991 R - 2012 to 2016

Electronically controlled shock absorbers are becoming more common, but there is also often the call for a more sporty set-up. And while the installation of a conventional aftermarket system is a technically very smooth process, there may be some irritating error messages because the electronic damper control doesn't get a grip on it. H&R cancellation kits prevent error messages of the on-board electronics, however, the function of the control unit remains fully intact.

The modules deactivate the standard electronic damper control and thus make the new suspension effective. 

Cancellation module kit for PASM. 

Fits:  
Porsche 981 Boxster / Boxster S - 2012  to 2016
Porsche 981 Boxster Spyder - 2016
Porsche 981 Cayman / Cayman S - 2013 to 2016
Porsche 981 Cayman GT4 - 2016
Porsche 718 Boxster 2.0ltr / 2.5ltr - 2017 to 2024
Porsche 718 Cayman - 2.0ltr / 2.5ltr 2017 to 2024

Porsche 991.1 Carrera / Carrera 4 3.4ltr - 2012 to 2016
Porsche 991.1 Carrera S / Carrera 4S 3.8ltr - 2012 to 2016
Porsche 991.1 Carrera GTS / Carrera 4 GTS 3.8ltr - 2012 to 2016
Porsche 991.2 Carrera / Carrera 4 3.0ltr - 2016 to 2019
Porsche 991.2 Carrera S / Carrera 4S 3.0ltr - 2016 to 2019
Porsche 991.2 Carrera GTS / Carrera 4 GTS 3.0ltr - 2016 to 2019
Porsche 991 turbo / turbo S - 2012 to 2016
Porsche 992.1 Carrera / Carrera 4 - 2019 to 2024
Porsche 992.1 Carrera S / Carrera 4S - 2019 to 2024
Porsche 992.1 Carrera GTS / Carrera 4 GTS- 2019 to 2024
Porsche 992.1 GT3 / GT3 RS - 2019 to 2024

Electronically controlled shock absorbers are becoming more common, but there is also often the call for a more sporty set-up. And while the installation of a conventional aftermarket system is a technically very smooth process, there may be some irritating error messages because the electronic damper control doesn't get a grip on it. H&R cancellation kits prevent error messages of the on-board electronics, however, the function of the control unit remains fully intact.

The modules deactivate the standard electronic damper control and thus make the new suspension effective. 

H&R Electronic Lowering Kit - only for cars with air-suspension (ETS)
Lowers car by: approx 40mm



Fits:
Porsche 9J1 Taycan - 2020 to 2024

The H&R electronic lowering module ETS is a product for cars which have an OE air- or ABC-suspension. By using the H&R ETS module, the car is lowered by approx 40mm, which does not only change the center of gravity but also optimize the driving dynamics as well as the driving safety. A sporty performance and harmonic optics is given without mechanical work. The H&R ETS module consists of an electronic hardware- module including plug connectors, a TÜV approval and a detailed mounting instruction. The H&R ETS module can be re-installed easily.


NOTE: Please state chassis-number by ordering.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

28623-1

The product you are viewing cross references to these numbers

H&R Sway Bars are the perfect compliment to H&R Springs, Coil Overs, Performance Shocks and Cup Kits.

Front & Rear Anti Roll Bar:
- Front - 24mm (adjustable in 2 places)
- Rear - 26mm (adjustable in 2 places)

Fits:
Porsche 964 Carrera 2 Tiptronic -1989 to 1994

Designed to reduce body roll, increase lateral stiffness and improve handling. All H&R Sway Bar kits have been shot peened and heat treated, and feature precision forged ends - many applications have multiple end link mounting points for adjustability. Also included are H&R exclusive bushings made from a Urethane / Teflon composite that eliminates squeaks, and don't require lubrication. Ever. That means no mess, no maintenance-just bolt in H&R Sway Bars and go!
H&R Sway Bars are 100% made in Germany, and are powder coated for long lasting good looks and durability on the street and track.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

33580-2

The product you are viewing cross references to these numbers

H&R spring sets offer an inexpensive but high quality possibility to experience sportively by yourself.
Including cars with Front Axle Lift system

Lowers car by: 20mm



Fits:
Porsche 992 turbo - 2020 to 2024
Porsche 992 turbo S - 2020 to 2024
for vehicles with PASM suspension
for vehicles with standard suspension

Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in unrivaled tensile strength and resiliency.

H&R Sport Springs offer the handling characteristics and aggressive appearance that you've been looking for, without the harsh ride characteristics of less-advanced spring systems. H&R Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive. H&R Sport Springs are crafted from a special 54SiCr6 spring steel to ensure quality and performance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

28628-2

The product you are viewing cross references to these numbers

H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.

Lowers car by: 10mm Front and Rear



Fits:
Porsche 992 GT3 RS - 2019 to 2024
including cars with Weissach package

These specially developed springs offer a moderate lowering of approx. 10 mm at the front and 10 mm at the rear and are also available for vehicles with the Weissach package.

The Porsche 911 GT3 RS is characterised by its sophisticated aerodynamics and precise handling. The H&R high-performance race springs were developed to further optimise these qualities. They enable even better road holding and improved handling.

They are a must for enthusiasts who want to get the most out of their sports car – your Porsche will impress you on the track and on the road alike.

Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in unrivaled tensile strength and resiliency.

H&R Sport Springs offer the handling characteristics and aggressive appearance that you've been looking for, without the harsh ride characteristics of less-advanced spring systems. H&R Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive. H&R Sport Springs are crafted from a special 54SiCr6 spring steel to ensure quality and performance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

28554-1

The product you are viewing cross references to these numbers

H&R spring sets offer an inexpensive but high quality possibility to experience sportivity by yourself.

Lowers car by: 1.5-2.0 inches on average



Fits:
Porsche 992 (911) Carrera 2S Cabrio / Coupe - 2019 to 2024
Porsche 992 (911) Carrera 4S Cabrio / Coupe - 2019 to 2024
Porsche 992 (911) Targa 4S - 2019 to 2024
For cars with Option Code 1BH - Suspension/shock absorbers, standard

* Incl. PASM
* Incl. Front End Lift
Every spring produced by H&R comes from the H&R ISO 9001 certified engineering and manufacturing facility in Germany. All H&R springs are produced from a special 54SiCr6 spring steel, which has strength rated at 290,000 psi resulting in unrivaled tensile strength and resiliency.

H&R Sport Springs offer the handling characteristics and aggressive appearance that you've been looking for, without the harsh ride characteristics of less-advanced spring systems. H&R Sport Springs feature more control and are engineered for the street, making them comfortable and fun to drive. H&R Sport Springs are crafted from a special 54SiCr6 spring steel to ensure quality and performance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

28652-2

The product you are viewing cross references to these numbers

Set of Four VTF Adjustable Lowering Springs.
Not for cars with PDDC (Porsche Dynamic Chassis Control)



Fits
Porsche 991 Carrera 4
Porsche 991 Carrera 4S
Coupe, Cabriolet and Targa models

Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)

Approx. Front Lowering - 15mm to 35mm
Approx. Rear Lowering - 20mm to 40mm

These are the perfect answer for cars equipped with electronic shock absorbers.

Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.

H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.

• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

23009-2

The product you are viewing cross references to these numbers

Set of Four VTF Adjustable Lowering Springs.
Including cars with Front Axle Lift



Fits
Porsche 992 Carrera 2
Porsche 992 Carrera 2S
Porsche 992 Carrera 4
Porsche 992 Carrera 4S
2wd and 4wd Coupe, Cabriolet and Targa

Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)

Approx. Front Lowering - 30mm to 40mm
Approx. Rear Lowering - 25mm to 35mm

These are the perfect answer for cars equipped with electronic shock absorbers.

Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.

H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.

• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

23020-1

The product you are viewing cross references to these numbers

Set of Four VTF Adjustable Lowering Springs.
Not for cars with PDDC (Porsche Dynamic Chassis Control)



Fits
Porsche 991 Carrera 2
Porsche 991 Carrera 2S
Coupe, Cabriolet and Targa models

Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)

Approx. Front Lowering - 15mm to 35mm
Approx. Rear Lowering - 20mm to 40mm

These are the perfect answer for cars equipped with electronic shock absorbers.

Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.

H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.

• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

23009-1

The product you are viewing cross references to these numbers

Set of Four VTF Adjustable Lowering Springs for Boxster and Cayman
For cars with and without PASM



Fits
Porsche 981 Boxster / Cayman
Porsche 981 Boxster S / Cayman S
Porsche 982 (718) Boxster / Cayman
Porsche 982 (718) Boxster S / Cayman S

Height Adjustable Springs
for original shock absorbers with and without electronic damping (PASM)

Approx. Front Lowering - 10mm to 25mm
Approx. Rear Lowering - 20mm

These are the perfect answer for cars equipped with electronic shock absorbers.

Lower your vehicle with world-renowned H&R Sport Springs and have the advantage of being able to fine-tune the lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7" depending on application, your stance can now be as unique as you are.

H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.

Only the front springs are adjustable on this kit

• Sport look and performance
• Stepless lowering of the vehicle's centre of gravity within the tested setting range
• Optimised driving dynamics
• For original shock absorbers with electrical adjustment (PASM)
• Adaptivity of electrically adjustable dampers remains unrestricted
• Developed and produces in Germany

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

23006-1

The product you are viewing cross references to these numbers