GKN

CV joint kit Constant Velocity Joint.



Fits:
Porsche 911 3.2L 84-89
Porsche 965 (964 TURBO)
Porsche 964 C2 INNER MAN / TIP
Porsche 993 C2 INNER MAN / TIP
Porsche 986 S 3.2L INNER ONLY
Porsche 996 3.4L INNER REAR LEFT OR RIGHT
Porsche 996 3.6L INNER REAR LEFT OR RIGHT

The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

The most notable indicator of a worn out CV joint is the loud clicking noise you hear when you turn the steering wheel.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133292301

The product you are viewing cross references to these numbers

CV Joint boot KIT (Constant Velocity Joint boot).



Fits:
Porsche 944 TURBO 1987-91
Porsche 968 1986-96

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95133290300

The product you are viewing cross references to these numbers

CV Joint boot KIT Constant Velocity Joint boot.



Fits:
Porsche 928 1978-81 INNER / OUTER
Porsche 930 1975-84

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92833292201

The product you are viewing cross references to these numbers

CV Joint boot KIT Constant Velocity Joint boot.



Fits:
Porsche 928 1982-84 INNER / OUTER

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92833292401

The product you are viewing cross references to these numbers

CV Joint boot kit (Constant Velocity Joint boot).



Fits:
Porsche 924 / 924S 1976-88
Porsche 944 82-91 (NOT TURBO)

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94433190300

The product you are viewing cross references to these numbers

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.



Fits:
Porsche 911 1984-89* 3.2L/3.3L (915 & G50 Gearbox) INNER
Porsche 964 C2 INNER
Porsche 993 FRONT INNER & REAR INNER
Porsche 928 85-96 INNER
Porsche 986 BOXSTER 3.2L 1999-2002 INNER / OUTER
Porsche 996 3.4L INNER REAR LEFT OR RIGHT

For 911 this will fit cars with transmissions:
915.72 - 08/1984 - 07/1986
915.73 - 08/1984 - 07/1986
G50.00 - 08/1986 - 07/1988
G50.01 - 08/1986 - 07/1989
G50.02 - 08/1986 - 07/1989
930.36 - 08/1984 - 07/1988
930.37 - 08/1985 - 07/1985

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

00004330644

The product you are viewing cross references to these numbers

CV Joint boot KIT (Constant Velocity Joint boot).



Fits:
Porsche 911 1976-86 (NOT TURBO)

Models 911 3.2L with transmissions:
915.67 - 08/1983 - 07/1984
915.68 - 08/1983 - 07/1985

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92333203700

The product you are viewing cross references to these numbers

Reconditioned replacement driveshaft
Shaft Length 531.5mm



Fits:
Porsche 924S 1986-88 Manual cars
Porsche 944 2.5L, 2.7L 1985>> (not Turbo) Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

*Reconditioned Drive Shafts are sold on a exchange basis, A surcharge of £40.00 will be held and then refunded when the old one is returned (subject to approval of supplier).

This driveshaft comes with joints and rubber boots.
Comes with 12 months warranty

Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94433203801

The product you are viewing cross references to these numbers

Reconditioned replacement driveshaft.
Please note:
Reconditioned units are sold on an exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned (subject to approval of supplier).



Length [mm] 406 mm
Wheel-side joint diameter [mm] 94.7 mm
Transmission-side joint diameter [mm] 94.7 mm
Bore Ø [mm] 8.2 mm
Number of Bores 6
Bolt Hole Circle Ø [mm] 78 mm
Service exchange part

Fits:
Porsche 911 >>1968 Manual cars
Short wheel base cars.

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

*Reconditioned Driveshafts are sold on a exchange basis, A surchange of £75.00 will be held and then refunded when the old one is returned

Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90133202611

The product you are viewing cross references to these numbers

Reconditioned replacement driveshaft
Please note:
Reconditioned Alternators are sold on an exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned (subject to approval of supplier).



Fits:
Porsche 911 1985-89 Turbo
Porsche 911 1985-89 WideBody
Porsche 911 1985-89 WideBody M491 Spec
Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93033203708

The product you are viewing cross references to these numbers

Reconditioned replacement driveshaft

Overall length: 603mm Flange diameter: 111mm

Fits:
Porsche 911 1985-86 (915 G15.72/73 Gearbox) Manual cars
Porsche 911 1987-89 (G50 Gearbox) Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

*Reconditioned Drive Shafts are sold on a exchange basis, A surcharge will be held and then refunded when the old one is returned (subject to approval of supplier).

Price is for each Drive Shaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

91133202415

The product you are viewing cross references to these numbers

Reconditioned Replacement Driveshaft
Please note:
Reconditioned units are sold on an exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned.



Fits:
Porsche 964 1989-94 C2 Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

*Reconditioned Driveshafts are sold on a exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned

Price is for each Driveshaft

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96433202417

The product you are viewing cross references to these numbers

Reconditioned replacement driveshaft
Please note:
Reconditioned units are sold on an exchange basis, A surcharge of £75.00 will be held and then refunded when the old one is returned (subject to approval of supplier).



Fits:
Porsche 911 1975-83 (915 Gearbox) Manual cars
Porsche 911 1984 3.2L (915 Gearbox) Manual cars

PLEASE NOTE: The old unit must be returned to Design911 in a built state, not in component pieces.

Price is for each Driveshaft.

PLEASE NOTE:

• The surcharge for this reconditioned part will be refunded when the exchange unit is received and approved by us and the relevant manufacturer.
• Please note, surcharge refunds often take an average of 6 to 8 weeks to be approved by the manufacturer.
• Acceptance of the exchange part is at the manufacturer's discretion, based on the part being fit for reconditioning.
• All surcharges and exchanges are subject to our terms and conditions.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92333203302

The product you are viewing cross references to these numbers

CV Joint boot KIT (Constant Velocity Joint boot).

Fits:
Porsche 911 1969-75
Porsche 911 TURBO 1975-77
Porsche 911 TURBO 1978-86
for 4 bolt driveshaft type

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90133229312

The product you are viewing cross references to these numbers

The CV joint (Constant Velocity Joint) rubber boot is located at each end of the axle assembly and protects the CV Joint. if the boot is split this can cause further damage.



Fits:
Porsche 911 1965-68
Porsche 914 1970-76
(for 6 Bolt drive shaft type)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

90133229311

The product you are viewing cross references to these numbers

The CV joint (Constant Velocity Joint).



Fits:
Porsche 911 2.7/3.0L 1974-84
6 Bolt driveshaft type

Tooth Gaps, profile shaft conn.: 25,
without groove in internal component,
D1: 25.84 mm,
Joint Ø: 100 mm,
Length: 32 mm, with cap,
Bore Ø: 8.2 mm,
Number of bores: 6,
Bolt Hole Circle Ø: 86 mm,

The CV joint (Constant Velocity Joint) is located at each end of the axle assembly and is most often used on front wheel drive cars. A 2wd vehicle will have 2 axles with 4 CV joints and boots. A 4wd will typically have twice as many as the 2wd. The CV joint allows the wheels of the vehicle to turn while still being able to put power to the wheels.

The most notable indicator of a worn out CV joint is the loud clicking noise you hear when you turn the steering wheel.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92333203200

The product you are viewing cross references to these numbers