FibreTek

Front light pod mounts, with fixings.
PAIR

Fits:
Porsche 911 1965 - 1989
Porsche 964 1989 - 1994

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

FRONTPODMOUNT

The product you are viewing cross references to these numbers

Give your Porsche 997 GT3 a distinctive and timeless look with this high-quality aftermarket rear ducktail spoiler. Inspired by classic Porsche styling, this spoiler adds a bold and aggressive touch while maintaining the GT3’s race-bred character. 

Fits:
Porsche 997.1 GT3 2007-08 (Excludes RS Variant)
Porsche 997.2 GT3 2009-11 (Excludes RS Variant)

Fitment Information:

- This spoiler does not include the third brake light, which must be purchased separately. Your original lamp cannot be reused, as it has a different shape designed to fit below the rear screen. You will need part number 99763105201, which will be suggested during checkout.

- To enable the third brake light, you must either modify your existing wiring harness or replace it with the version used for vehicles with a spoiler-mounted brake light. The required part is 99762267070, which will also be suggested during checkout.

- This is a fibreglass product and must be professionally prepared and pre-fitted before painting. Allow it to dry naturally—baking is not recommended. 

- This bumper can be fitted to 997 GT3 models without needing to replace the rear light units or rear bumper.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

P9972DCTLGT3

The product you are viewing cross references to these numbers

Side skirts 993 EVO 2 Look.
Made from fiberglass (lightweight parts).

Fits:
Porsche 993 C2 / C4
*** (narrow body only, not turbo)

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK447

The product you are viewing cross references to these numbers

Front bumper 993 EVO 2 Look.
The bumper is made from fiberglass (lightweight parts).

Fits:
Porsche 993 C2 / C4

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK445

The product you are viewing cross references to these numbers

Front spoiler lip for EVO 2 front bumper. 
Made from fiberglass.

Fits:
Porsche 993 (1998) with EVO 2 front bumper
*** Will not fit  993 EVO Look bumpers for C2/C4 models.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK448

The product you are viewing cross references to these numbers

Lightweight front panel. 
Made from fiberglass (lightweight parts).

Fits:
Porsche 924 Turbo models
or to rebuild a 924 GT / GTS / GTR

Diagram ref no 16

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK253

The product you are viewing cross references to these numbers

Singer Style backdate door pockets. Made from fiberglass (lightweight parts).
Available in three metal finishes: black or clear anodized and polished/chrome plated.

Fits: all 911 / 964 / 993 models.

The set consists of:
• GRP door pockets with GRP handle top section
• Aluminium handle bottom section with decorative edge
• Opening metal eyelets
• Hinges
• Stainless steel retaining plates
• Assembly small parts and Magnets

The door pockets include all the necessary assembly parts.

The stainless steel retaining plates are mounted between the door card and the metal door. The aluminium handle bottom section is then screwed into the stainless steel retaining plates, which serves as a stable handle solution and at the same time as a decorative edge.

The GRP door pocket and the handle top section can optionally be covered with leather or fabric, or painted to match our fiberglass smooth interior kits.

The handle top section is screwed to the aluminium handle bottom section. The door pocket is attached to the door card using the hinges and closing elegantly by help of the magnets supplied, which are attached to the rear recesses of the door pocket and snap onto the corresponding brackets of the door handle bottom section.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK450

The product you are viewing cross references to these numbers

Shortened Backdate Singer style centre console made of GRP.

Fits: all 964 / 993 models

Includes integrated stainless steel mounting brackets for installation in the vehicle and for holding the handbrake tray and the storage compartment.
A loose fiberglass shift tray for converting the leather shift gaiter to a rubber shift gaiter (F-model look) is also included.
Our Backdate gear knobs are the perfect addition to this centre console.

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK449

The product you are viewing cross references to these numbers

Rear wing / roof spoiler.

• Suitable for Porsche 911/996 & 911/997 built in 1999-
• Suitable for the model/body variant(s) Coupe
• not suitable for vehicles with rear window wiper

With expert opinion and therefore registration-free
Good fit, as it is not a universal part but was developed specifically for this vehicle type!

Clean and easy attachment using 3M™ Acrylic Plus Adhesive Tape PT 1100 with extremely high instant adhesion and high adhesive strength
Installation with 3M™ Adhesive Tape PT 1100 takes place in three simple steps:
- Clean the surface with the enclosed 3M cleaning cloth
- Remove the protective strip from the pre-assembled and pre-mounted adhesive tape
- Stick on, done!

3M™ Acrylic Plus Adhesive Tape PT 1100 is a 4-layer black double-sided acrylic adhesive tape with very high instant adhesion that was specially developed for the automotive sector and is ideal for attaching rigid attachments where an aesthetic visible edge is desired. PT1100 has very good adhesion to a variety of automotive surfaces, good internal strength, excellent long-term stability and very good adaptability to the surfaces to be bonded. The unique viscoelastic properties of the PT1100 ensure that tensions in the adhesive seam are excellently reduced, resulting in extremely durable connections.

High durability even in car washes, at high speeds and extreme temperatures and humidity, as well as high shock and weather resistance
Easy to dismantle without damaging the paint.
Rear window cover is made of high-quality ABS material.

Including mounting accessories, if necessary.
Including mounting instructions.

Material is flexible.

Please note: This is a special-order item, can take 8-12 weeks to be delivered and once ordered cannot be cancelled.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

HSB103

The product you are viewing cross references to these numbers

Front bumper. Porsche 997.2 GT3 Replica 

Material: Polyurethane PU (Plastic)

Fits:
Porsche 997 MKI 2005 - 2008
Porsche 997 MKII 2009 - 2012

Please note: This is an aftermarket bumper and it will require a professional and experienced bodyshop to fit this. Some extra prep work may be required, if you are converting your car from MKI 997 there will be light modification required and we recommend this to be done by auto electrician.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

9975051919

The product you are viewing cross references to these numbers

3.0 RSR Rear Spoiler 

Fits:
Porsche 911 1974-89

Material
Made from Fibre Glass GRP

Product Type:
Replica

Rear bumper 911 3,0 RS with mounting brackets for shortened shock absorber tubes.

Fits:
Porsche 911 3,0 RS 

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK10

The product you are viewing cross references to these numbers

Rear bumper 911 3,0 RSR with mounting brackets for shortened shock absorber tubes.

Fits:
Porsche 911 3,0 RSR

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK11

The product you are viewing cross references to these numbers

Front bumper for 911 3,0 RS with mounting brackets for shortened shock absorber tubes.

Fits:
Porsche 911 3,0 RS

Please note: This part is on special order terms. It will be made to order that could take 6-8+ weeks. It is not a subject to cancellation or return if not required.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TK9

The product you are viewing cross references to these numbers