DesignTek

DesignTek Sports Exhaust made from High Grade stainless steel.

Fits:
Porsche 997.1 C2 / C2S / C4 / C4S 2005-08

PLEASE NOTE
this exhaust system will accept 3.8L tail pipe straight on
If your car is 3.6L you will need DesignTek 3606409703 tail pipes
Output flange 2.25" / 58mm

Made from 14 - 16 gauge T304S with a mirrored polished finish, Giving a 8-10 bhp that you can really feel, Superb sports car sound, throaty at idle and medium speeds.

DECIBEL READINGS
IDLE : 76DBS
MAXIMUM: 102DBS

To view the BHP and torque gains on dyno results CLICK HERE

For Fitting Instructions CLICK HERE







Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009702

The product you are viewing cross references to these numbers

Exhaust Manifold / Header Equal Length DesignTek K24 for Porsche 996 Turbo



DesignTeK High Grade stainless steel equal length headers. K24 Sport stainless steel headers have been designed to increase HP and TQ on cars fitted with upgraded K24 turbochargers. The medium length and 41.5 mm primary tube diameter design is perfectly matched for the exhaust travel from the heads to the larger turbochargers for better boost response and power throughout the rev range. The smooth flow through the mandrel bends and pyramid merge collector offer superior flow characteristics as compared to the OEM headers. Power gains are increased by 17 HP and 20 Ft. TQ with no other modifications.

Fits:
Porsche 996 Turbo S /GT2 /X50

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606309604

The product you are viewing cross references to these numbers

Exhaust Manifold / Header Equal Length DesignTek K16 for Porsche 996 Turbo



DesignTeK High Grade stainless steel equal length headers.K16 Sport stainless steel headers have been designed to increase HP and TQ on cars fitted with the OEM K16 turbochargers. The short design is perfectly matched for the exhaust travel from the heads to the K16 turbo for better boost response and power throughout the rev range. The smooth flow through the mandrel bends and pyramid merge collector offer superior flow characteristics as compared to the OEM headers. Power gains are increased by 14 HP and 16 Ft. TQ with no other modifications.Adds up to 14 HP / 16 Ft. TQ
All Stainless steel construction.
Mandrel bent short primary tubes.
Flowed Pyramid merge collector.
Designed specifically for cars fitted with OEM size K16 Turbos

Fits:
Porsche 996 Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606309603

The product you are viewing cross references to these numbers

DesignTek Exhaust tail pipes 4 Tube Design.
Price is for a PAIR.



DesignTek stainless steel sports tailpipes with elegant four-tube styling.

Fits:
Porsche 996 Turbo

Porsche 996 C4S

Dimensions: 150mm x 100mm

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606409601

The product you are viewing cross references to these numbers

Exhaust Sports 200 Cell Catalytic Converter Pipes.  (SET OF 2 Left & Right)



DesignTek Sport 200 Cell catalytic converters 996 Sport Cats Give a gain of +12 to 15BHP.
Made from high grade stainless steel.

Only for cars with pre & after sensors. Some USA spec cars may require sensor point modification to fit.

The item can be used on vehicles equipped with only a pre sensor. The post sensor hole can simply be blanked off during installation. Since vehicles with only a pre sensor are generally less sensitive than those with dual sensors, this setup is acceptable. Blanking the unused hole is a common and effective method to ensure a proper fit for this product on pre-sensor-only vehicles.

Fits:
Porsche 996 Carrera 3.4L / 3.6L

A Voucher for £100 available when you buy this product. For more information  CLICK HERE

Please note: These sport cats will make your car sound louder than with stock cats. If you have, or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.

For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.

If you are located outside the UK, please check your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109961

The product you are viewing cross references to these numbers

Exhaust Catalytic Converter Bypass Pipes



Fits:
Porsche 996 GT3

2ND ARY CATALYTIC BYPASS PIPES
More power and sportscar sound
More power on 996 GT3 +12HP
more sports car sound
Saves 30lbs 15 KG from rear of your 996.

Not UK MOT appoved

*A re-map to the ECU may require when fitting these cats.

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.

For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.

If you are located outside the UK, please check your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99611112108

The product you are viewing cross references to these numbers

DesignTek High Grade stainless steel equal length headers. 12 HP 12FT LB Torque, Merger Collector- More power + torque is the benefit,Headers really make the car noticeably faster across the rpm range also adds a deeper sweet sound.

Fits:
Porsche 996 GT3 1999-05

Inlet port size - 48x34mm (oval shape)
Outlet port size - 56mm
Primary tubing diameter - 44mm
Equal length - No

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606309602

The product you are viewing cross references to these numbers

Exhaust Manifold / Header DesignTek
(SET OF 2 Left & Right)

DesignTek High Grade 304 stainless steel headers. 12 HP 12FT LB Torque with a remap, Merger Collector- More power + torque is the benefit, Headers really make the car noticeably faster across the rpm range also adds a deeper sweet sound.

Fits:
Porsche 996 Carrera 3.4L / 3.6L
Porsche 997 Carrera 3.6L / 3.8L

Kit includes the 2 gaskets for the heads and the 2 triangular flange gaskets with nuts and bolts.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606309601

The product you are viewing cross references to these numbers

Wheel bolt Chrome plated Porsche Boxster 986/996/997 Single wheel bolt - Extra Long



Fits cars fitted with 15mm or 18mm wheel spacers.

Rusty old looking wheel nuts can spoil the look of your Porsche and ever damage your alloy wheels !

Performance parts makers DesignTek have come out with a range of high quality wheel bolts.

The Technical. DesignTek wheel bolts are produced from SCM440 grade alloy steel which has good resistance to a wide variety of corrosive media including nitric acid and some organic acids. It attains its maximum corrosion resistance when in the highly polished or buffed condition. In general its resistance to pitting and crevice corrosion resistance is close to that of grade 304. Stress corrosion cracking resistance of Grade 440 is very high. Each wheel bolt is chrome-plated and salt spray tested 240 hours

Fits:
Porsche Boxster 986/987
Porsche Cayman 987C
Porsche 996 & 997 Carrera
Porsche 996 & 997 Turbo.

Wheel bolt Chrome plated
Single wheel bolt.



Fits standard cars or cars fitted with upto 7mm wheel spacers.

Rusty old looking wheel nuts can spoil the look of your Porsche and ever damage your alloy wheels !

Performance parts makers DesignTek have come out with a range of high quality wheel bolts.

The Technical. DesignTek wheel bolts are produced from SCM440 grade alloy steel which has good resistance to a wide variety of corrosive media including nitric acid and some organic acids. It attains its maximum corrosion resistance when in the highly polished or buffed condition. In general its resistance to pitting and crevice corrosion resistance is close to that of grade 304. Stress corrosion cracking resistance of Grade 440 is very high. Each wheel bolt is chrome-plated and salt spray tested 240 hours

Fits:
Porsche Boxster 986/987
Porsche Cayman 987C
Porsche 996 & 997 Carrera
Porsche 996 & 997 Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3608100007

The product you are viewing cross references to these numbers

Locking wheel bolt kit (+7mm/+15mm longer). Chrome plated 
Fits cars with smaller spacers on front (0mm-7mm) and larger spacer on rear (12mm-15mm)



Rusty old looking wheel bolts can spoil the look of your Porsche and even damage your alloy wheels.
Performance parts makers DesignTek have come out with a range of high quality locking wheel bolts to match thier stainless wheel bolts range.

The Technical:
DesignTek wheel bolts are produced from SCM440 grade alloy steel which has good resistance to a wide variety of corrosive media including nitric acid and some organic acids. It attains its maximum corrosion resistance when in the highly polished or buffed condition. In general its resistance to pitting and crevice corrosion resistance is close to that of grade 304. Stress corrosion cracking resistance of Grade 440 is very high. Each wheel bolt is chrome-plated and salt spray tested 240 hours

Fits:
Porsche Boxster 986 / 987
Porsche 996 / 997
Porsche 987C Cayman

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3608300003

The product you are viewing cross references to these numbers

Side Sills Trims Carbon Fibre.
STD size. Sold as one pair.



Fits:
Porsche 996 1998-05
Porsche 986 Boxster 1997-04

Smart looking carbon fibre side sills with text:
- Carrera logo
- Boxster logo
- No Logo / Text

Select below please