DesignTek


Replacement tail pipes made from stainless steel, Angle cut end, this tail pipe will also change the exhaust note very slightly deeper sound.
Fits:
Porsche 964 C2 / C4
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606406401
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93

DesignTek sports rear box exhaust produced from the highest grade stainless steel. Deeper and fuller sound.

Fits:
Porsche 955 Cayenne 3.2L V6
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606005501
The product you are viewing cross references to these numbers
- Porsche Cayenne 3.2L V6 2003>>

DesignTek 997 Turbo Sport exhaust with 200 cell HIGH FLOW catalytic converters complete with high flow equal length headers.
Made from high grade T304 stainless steel. DesignTek 997 turbo system fits with original Porsche tail pipes or DesignTek tail pipes.
Fits:
Porsche 997 Turbo 2007>>
NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EXHAUSTKIT97
The product you are viewing cross references to these numbers
- Porsche 997 TURBO 2007>>


DesignTek 996 Performance exhaust package. High Grade stainless steel exhaust system for Porsche 996 1998-2004.
Made from 14 - 16 gauge T304 stainless steel.
Includes Sports Exhaust and Sports Cat bypass pipes, really feel and superb sports car sound.
NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.
For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.
If you are located outside the UK, please check your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EXHAUSTKIT27
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005


DesignTek 996 Performance exhaust package. High Grade stainless steel exhaust system for Porsche 996 GT3
Made from 14 - 16 gauge T304 stainless steel.
Includes Sports Cat Bypass and Equal length sports headers Giving +15 to +20 bhp that you can really feel and superb sports car sound.
NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.
For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.
If you are located outside the UK, please check your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EXHAUSTKIT26
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005

DesignTek 996 Performance exhaust package. High Grade stainless steel exhaust system for Porsche 996 1998-2004.
Made from 14 - 16 gauge T304 stainless steel.
Includes Sports mufflers, Equal length sports headers and sports cats bypass pipes.
NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.
For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.
If you are located outside the UK, please check your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
EXHAUSTKIT24
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005

(SET OF 2 Left & Right)

Fits:
Porsche 996 C2 3.4L 1997-08/01
Porsche 996 C4 3.4L 1997-08/01
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99611196901S
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01


DesignTek Predator 997 Turbo Sport exhaust fitted with 200 cell HSJ sports high flow catalytic converters. The system is produced with high flow 76mm T304 stainless steel tubing and fixed together with T316 Lsi welded joints. Each bend section is produced by automated CNC plasma cutting equipment and mandrel bending machinery to give the ultimate finish, flow and power.
Total weight is an amazing 12.5Kg. 35Kg Lighter than the factory exhaust.
DesignTek 997 turbo system fits with original Porsche tail pipes or DesignTek tail pipes.
Sound file & Video courtesy of the DesignTeK dealer in France
Fits:
Porsche 997 Turbo 2007>>
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606009703
The product you are viewing cross references to these numbers
- Porsche 997 TURBO 2007>>


DesignTek Twin Square Design tail pipes, bolt-on exhaust tips for stock OEM Porsche 997TT mufflers. These tips should also fit virtually any aftermarket 997TT exhaust designed that allows reinstallation of factory tips.
Made from High quality T304 stainless steel show mirror polished.
Diameter: 60 mm
Price is for a PAIR
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606409706
The product you are viewing cross references to these numbers
- Porsche 997 TURBO 2007>>


The intercoolers control the side to side flow design that flows along it's 16inch length. This IC will be more than sufficient for any highly tuned 996TTs or GT2s cars to applications of upto 900hp. DesignTek Porsche intercoolers produces high-flow rate and dramatic temperature reduction which are mainly contributed by two key factors. Firstly, the great temperature reduction is accomplished by a 40% larger than stock sized intercooler cores in which each core has the capacity flow rate of 750 CFM. Secondly, which in our opinion is the most important element of an IC; the inlet/outlet end-tanks. Our end-tanks are a one piece cast aluminium construction design, formed with little to no corners and are also fully polished on the insides to increase air velocity; therefore minimizes welding points and greatly increases air flow and reduction in pressure drop which yields to improved efficiency. Also please note that all of our intercoolers come only in high polished finished for that uncompromised appearance.
The specifications:
- Dimensions Core Thickness: 3.5"
- Core Volume vs. Stock: 40% larger
- Performance Efficiency: 85%
- Flow rate: 620 CFM / side
- Leak Tested: @ 30 PSI
- Pressure Drop: less than 1%
Fits:
Porsche 996 Turbo 2000-05
Porsche 996 GT2
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
99611063000
The product you are viewing cross references to these numbers
- Porsche 996 TURBO 2000-05
- Porsche 996 GT2 2001-05


Out lets 2 x 85mm diameter pipes
Fits:
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606408701
The product you are viewing cross references to these numbers
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08

(SET OF 2 Left & Right)
DesignTek Stainless steel sport exhaust, produced to give a deeper fuller sound that the standard factory exhaust boxes. Tail pipes are not included the factory tail pipes can be used with this system.
Fits:
Porsche 996 C2
Porsche 996 C4
Porsche 996 C4S
Sound = slightly deeper more than the factory standard exhaust
French
Silencieux / Silencer Sport DesignTek pour Porsche 996 Carrera
DesignTek inoxydable échappement sport en acier , pour donner un produit que les boîtes d'échappement standard d'usine complète son plus profond.
German
Auspuff / Schalldämpfer Sport DesignTek für Porsche 996 Carrera
DesignTek Edelstahl Sportauspuff , hergestellt , um ein tieferes volleren Klang , dass die Standard-WerksabgasBoxen geben.
Norwegian
Eksos lyddemper / Silencer Sports DesignTek for Porsche 996 Carrera
DesignTek Rustfritt stål sport eksos , produsert for å gi en dypere fyldigere lyd som standard fabrikk eksos bokser.
Dutch
Uitlaat Uitlaat / Knalpot Sport DesignTek voor Porsche 996 Carrera
DesignTek RVS sport uitlaat, geproduceerd om een diepere voller geluid dat de fabriek standaard uitlaat dozen geven .
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606009602
The product you are viewing cross references to these numbers
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005

The Porsche part is ugly roto-formed cheap plastic with parting lines whereas accurate replica is carbon fiber.
Saves 8 to 9lbs about 4Kg from the rear of all 964's and 993's. Will not work on C2 Turbos/965 cars.
Replaces blower motor assembly and ductwork and still allows plenty of heat just like the factory RS part.
Ultra cool clear coated real carbon fiber tube that really cleans up engine bay and makes working on engine easy.
Simple do it yourself 20 minute installation that gives you the RS style engine look.
All late model 993's 1996-98 require the 964 early type fan shroud (as shown on exploded image)
Can be added below
fits:
Porsche 964 C2/C4 1989-1994
Porsche 993 C2/C4 1994-1997
To see a video about this product Click Here
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
964167003
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
- Porsche 964 (911) RS 3.6L 1991-93
- Porsche 964 (911) RS 3.8L 1991-93
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) RS 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97


DesignTek Simple bolt on replacement tail pipe for factory center muffler, mirror finished stainless steel polished for a show car shine. Each pipe is 85mm double angle mitre cut.
Fits:
Porsche 997 GT3
Porsche 997 GT3RS
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606409704
The product you are viewing cross references to these numbers
- Porsche 997 GT3 2007>>
- Porsche 997 MKII GT3 2010>>

Fits:
Porsche 996 1998-05 all models
Porsche 997 2005-07 all models
Porsche 986 Boxster 1997-05 all 6 speed models
Porsche 987 Boxster
Porsche 987C Cayman
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3601009961
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 996 C4S 3.6L 09/01-2005
- Porsche 996 TURBO 2000-05
- Porsche 997 Carrera 2 3.6L 2005>>
- Porsche 997 Carrera 2S 3.8L 2005>>
- Porsche 997 Carrera 4 3.6L 2005>>
- Porsche 997 Carrera 4S 3.8L 2005>>
- Porsche 997 TURBO 2007>>
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08


DesignTek stainless steel sports 100 cell catalyst, with German hi-flow catalyst. Produces more air flow which in turn produces more power. Designed to give a deeper more sporter sound.
This product comes with the hole to re-fit the lambda sensor.
Fits:
Porsche 964 C2 / C4 1989-94
Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.
Design 911 Recommends this product best value and best quality
NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.
For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.
If you are located outside the UK, please check your local laws and regulations to ensure compliance.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
3606109641
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93