DesignTek

DesignTek Exhaust Muffler / Silencer Sports VALVETRONIC for Porsche Boxster, Cayman 981. DesignTek Valvetronic sports exhaust system gives smooth power and torque to the wheels.

Fits:
Porsche Boxster 981
Porsche Cayman 981

This system comes complete with Stainless Steel Chromed Tail pipes.

Made from high quality 14-16 gauge T304 stainless steel, hydro-formed muffler cases, radiuses stressed relieved with 2000 degree ceramic fiber and stainless steel wool packed free flow mufflers.

This unique exhaust configures a dual-tone setup controlled by a key fob which you can switch on the fly. Direct replacement for the factory mufflers and will work with the stock primary pipe and cats or DesignTek primary bypass pipe.

High-Performance Rear Exhaust with sound switch:
● Push the sound-button between:
Switch closed: Deep Sports Turbo Sound

Switch opened: Perfect Racing Sports Sound

Superb sports car sound, throaty and deep with the valves opened, but docile with the valves closed.

Please note the remote controllers do not come with batteries. You will have to source them at your own cost. The type is CR2025

For Wiring Diagram please CLICK HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606008110

The product you are viewing cross references to these numbers

DesignTek Sport Center Section for 997GT3, 997GT3 RS and GT3 Cup cars - Stainless Steel Polished with Matt Black pipes



This sports centre sections is a direct bolt on replacement, you don't even need to removal of bumper, Proprietary megaphone design- mandrel bent tubing which saves 14 lbs over the stock center section ( GT3 , RS with Ti center muffler saves 5 lbs )
Sport button remains fully functional for every day use, absolutely NO modifications. This system offers a deep aggressive exhaust note over the Porsche stock system the factory primary mufflers, catalyst and exhaust flaps are all retained

The DesignTek Sport Center Section system is a direct bolt on replacement center section which reduces weight, improves sound and offers a mild increase in performance. Porsche has done a wonderful job with the design and manufacture of the factory system with virtually no improvement to be made by installing a complete (mufflers, headers and cats) aftermarket system.

Direct bolt on replacement center section with dual 3.5 stainless tips (factory offers dual 3"). The system is made of mandrel bent T304 stainless tubing which is TIG welded and features a proprietary megaphone design to improve sound in the upper RPM range. The system saves over 14 lbs of weight over the stock ( stock gt3) and (5 lbs over GT3RS with Ti muffler), power is up 3-5 hp on average and now the sound is finally worthy of this magnificent engine.

Fits:
Porsche 997 GT3 / GT3RS 2007>>

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606609717

The product you are viewing cross references to these numbers

Sports Exhaust Muffler Cat Back (ROAD) Rear box. Porsche 997 Turbo Gen2 DesignTek



Road Version gives a great deep sound which every Porsche driver desires

This rear cat back system fit to the OE factory cats and tail pipes.

Fits:
Porsche 997 Turbo Gen2 2010>>
Porsche 997 Turbo S Gen2 2010>>

Click 'Zoom in' for large parts diagram.
3606009748 replace No 1.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009748

The product you are viewing cross references to these numbers

DesignTek Exhaust tail pipes twin Carbon Fibre Effect for Porsche 997 without PSE.
Carbon Fibre Effect quad tail pipes.
(SET OF 2)

Fits:
Porsche 997 MKII 3.6L
Porsche 997 MKII 3.8L

Note: NOT to be used conjunction with sports exhaust system or Carrera S power kit.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606409744

The product you are viewing cross references to these numbers

Exhaust catalytic converter GILLET flanges.



Standard Replacement Exhaust Catalytic Converter
Approved Petrol Cats made in grade T409 stainless steel.

Fits:
Porsche 993 C2 / C4 / C2S / C4S / RS 1994-98
Fits GILLET heat exchangers with gasket 92811112702

Our cat is made up of the following components:

• Ceramic monolith of a honeycomb design to allow free air flow and maximum surface area, coated with precious metals to enable the conversion of gasses that pass through it
• Interam matting to hold the monolith in place. The matting expands when exposed to heat to supply the pressure needed to keep the monolith secure
• A grade 409 stainless steel can (or housing) to provide protection and enable the cat to be built into the exhaust system. 409 grade can contain upto 90% iron and will be prone to rust. It still has higher rust-resistant properties than mild steel.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99311321343

The product you are viewing cross references to these numbers

Exhaust Catalytic Converter BISCHOFF Flanges.



Standard Replacement Exhaust Catalytic Converter
Approved Petrol Cats made in grade T409 stainless steel.

Fits:
Porsche 993 C2 / C4 / C2S / C4S / RS 1994-98
Fits to BISCHOFF heat exchangers with gasket 93011119206

Our cat is made up of the following components:

• Ceramic monolith of a honeycomb design to allow free air flow and maximum surface area, coated with precious metals to enable the conversion of gasses that pass through it
• Interam matting to hold the monolith in place. The matting expands when exposed to heat to supply the pressure needed to keep the monolith secure
• A grade 409 stainless steel can (or housing) to provide protection and enable the cat to be built into the exhaust system. 409 grade can contain upto 90% iron and will be prone to rust. It still has higher rust-resistant properties than mild steel.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99311321316

The product you are viewing cross references to these numbers

Standard Replacement Exhaust Catalytic Converter for Porsche Boxster 986 2.5L



Porsche Boxster 2.5L Replacement Cats made in grade 409 stainless steel. Recommend to change in a pair

Fits:
Porsche Boxster 986 2.5L

Note: You will need M8x1x10 Plug (90021901500) & M8x11.5 Seal ring (90012305020) from each original Cat or suitable replacement

A catalytic converter is an emissions control device to stop harmful exhaust gasses from entering the atmosphere. In 1993, they became legality in the UK as part of the Euro Emissions standards. The aim of them is to improve air quality. As emissions standards have become more stringent the number of cats on a vehicle has increased. Many vehicles now have two or more to enable them to meet the Euro Emissions standards.

Our cat is made up of the following components:

• Ceramic monolith of a honeycomb design to allow free air flow and maximum surface area, coated with precious metals to enable the conversion of gasses that pass through it
• Interam matting to hold the monolith in place. The matting expands when exposed to heat to supply the pressure needed to keep the monolith secure
• A grade 409 stainless steel can (or housing) to provide protection and enable the cat to be built into the exhaust system. 409 grade can contain upto 90% iron and will be prone to rust. It still has higher rust-resistant properties than mild steel.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99611392

The product you are viewing cross references to these numbers

Standard Replacement Exhaust Catalytic Converter for Porsche Boxster 986 2.7L / 3.2L 400 Cell

PORSCHE BOXSTER 2.7L & 3.2L S Replacement Type Approved Petrol Cats made in grade 409 stainless steel. Recommend to change in a pair

Fits:
Porsche Boxster 986 2.7L / 3.2L
Note: You will need M8x1x10 Plug (9000838000) & M8x11.5 Seal ring (90012305020) from each original Cat or suitable replacement

A catalytic converter is an emissions control device to stop harmful exhaust gasses from entering the atmosphere. In 1993, they became legality in the UK as part of the Euro Emissions standards. The aim of them is to improve air quality. As emissions standards have become more stringent the number of cats on a vehicle has increased. Many vehicles now have two or more to enable them to meet the Euro Emissions standards.

Our cat is made up of the following components:
• Ceramic monolith of a honeycomb design to allow free air flow and maximum surface area, coated with precious metals to enable the conversion of gasses that pass through it
• Interam matting to hold the monolith in place. The matting expands when exposed to heat to supply the pressure needed to keep the monolith secure
• A grade 409 stainless steel can (or housing) to provide protection and enable the cat to be built into the exhaust system. 409 grade can contain upto 90% iron and will be prone to rust. It still has higher rust-resistant properties than mild steel.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99611302

The product you are viewing cross references to these numbers

DesignTek Pedals alloy and footrest kit.
For RHD Cars



Fits:
Porsche 911 1974-89
Porsche 964 1989-94
Porsche 993 1994-98

Options:
- For Manual or Tiptronic cars

*Note - The footrest will require modification for
993 models.

Select below please

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

360720911

The product you are viewing cross references to these numbers

DesignTek Pedals alloy and footrest kit
For RHD Cars



Fits:
Porsche 986 Boxster 1997-04
Porsche 987 Boxster 2005>>
Porsche 987C Cayman 2007>>
Porsche 997 2005>> (not GT2)
Porsche 996 1998-05

Options:
- for Manual or Tiptronic

Select below please

Exhaust Catalytic Converter Bypass Pipes



DesignTek® Evolution exhausts are built for the "tuners market" high performance modified vehicles. With over 50 years of experience the products are built to the highest technical level by the manufacturing team behind the DesignTek® Evolution range.

This product may trip the engine check light, you will need to either re-map the vehicle so that it is reading the lambda sensors correctly, or fit some extra lambda sensor extensions our part number 00060612300, the product has holes for the lambda sensors. The cat bypass will increase the power delivery also give the car a deeper sporty sound.

Details:
- More power and sportscar sound.
- More power upto +10hp.
- Saves 30lbs 15 KG from rear of your 997.

*A re-map to the ECU may require when fitting these cats.

Fits
Porsche 997 Carrera 3.6L
Porsche 997 Carrera 3.8L

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606209971

The product you are viewing cross references to these numbers

Exhaust Catalytic Converter Bypass Pipes  (SET OF 2 Left & Right)

  

The DesignTek® Evolution range of products are premium manufactured performance exhaust systems built with exceptional technology. The products are dyno tested with proven Hp gains built to rigorous TÜV and ISO 9001 quality certification standards.

DesignTek® Evolution exhausts are built for the "tuners market" high performance modified vehicles. With over 50 years of experience the products are built to the highest technical level by the manufacturing team behind the DesignTek® Evolution range.

This product may trip the engine check light, you will need to either re-map the vehicle so that it is reading the lambda sensors correctly, or fit some extra lambda sensor extensions our part number 00060612300, the product has holes for the lambda sensors. The cat bypass will increase the power delivery also give the car a deeper sporty sound.

Details:
- More power and sportscar sound.
- More power upto +10hp.
- Saves 30lbs 15 KG from rear of your 996.

*A re-map to the ECU may require when fitting these cats.

Fits
Porsche 996 Carrera 3.4L
Porsche 996 Carrera 3.6L

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

NOTE: In the United Kingdom, sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001. They are not MOT compliant and cannot be used on public roads. These components are intended solely for race and track use.

For vehicles manufactured before 1st March 2001, a non-type approved sports catalytic converter may be fitted, provided it offers comparable performance to the original and the vehicle continues to meet the applicable emissions standards for its age. The vehicle must still pass an MOT test.

If you are located outside the UK, please check your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606209961

The product you are viewing cross references to these numbers

Performance Short Throw Shifter Raised Base Unit Porsche 996 / 986 / 987 / 997 / 987C (All 6 Speed cars)



Aluminum Shift Raised Base for all 986/996/997 models. This shift Raised Base gives a 5 inch lift to your stock or aftermarket shifter. It is anodized gold for a nice finish to the interior. Please note, your stock center console cannot be used with this item.

DIMENSIONS:
Length: 10.5 in Width: 5 in Height: 5 in Weight: Less than 1 pound

FITMENT: All 986/987/996/997 models with manual transmission.

The risers are used for vehicles with no centre console just like race cars. This product is to be used with Short Throw Shifter part no. 3601009964 if required

Fits:
Porsche 996 1998-05 all models
Porsche 997 2005-07 all models
Porsche 986 Boxster 1997-05 all 6 speed models
Porsche 987 Boxster
Porsche 987C Cayman

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3601009967

The product you are viewing cross references to these numbers

Exhaust Muffler / Silencer Titanium with Catalytic Converter Twin Chamber Design Weight: 9.90Kg

Fits:
Porsche 997 Turbo

DesignTek Titanium Super light weight Sport exhaust system. Original Porsche system weight 48Kg, DesignTek Titanium system just 9.90Kg. 996TT / X50/ GT2 / 997 Turbo exhaust system with two 200 cell stainless steel cased German Motorsports Race Cats, DesignTek Exhaust has much lower back pressure and more guaranteed power proven & tested.


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009737

The product you are viewing cross references to these numbers

Exhaust Muffler / Silencer Titanium with Catalytic Converter Single Chamber Design Weight: 9.50Kg



DesignTek Titanium Super light weight Sport exhaust system. Original Porsche system weight 46Kg, DesignTek Titanium system just 9.50Kg.996TT / X50/ GT2 / 997 Turbo exhaust system with two 200 cell stainless steel cased German Motorsports Race Cats.

Fits:
Porsche 997 Turbo

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009738

The product you are viewing cross references to these numbers

DesignTek Headers Cat Bybass



Fits:
Porsche 997 GT3 / GT3RS 2007>>

High quality T304 Stainless steel equal length headers C.N.C. mandrel bent, computer numerical controlled mandrel bending equipment. The headers come complete with the provision for the before and after lambda sensors. As the vehicle will not be using the reading from these sensors the ECU will need to be re-programmed or re-mapped.
The Designtek are designed for maximum flow with no restriction. The headers are designed to produce more torque and horsepower across the Rev range. This products is designed for track cars and highly tuned vehicles

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606309706

The product you are viewing cross references to these numbers