DesignTek

Exhaust Catalytic Converter Porsche 955 3.2i V6 8/03-4/07 (2nd cat). Standard replacement secondary Catalytic Converters.



Fits:
Porsche 955 3.2i V6 8/03-4/07 (2nd cat)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95511302411

The product you are viewing cross references to these numbers

Exhaust catalytic converter.



Fits:
Porsche 928 5.4i GTS 8/91-11/95

Our cat is made up of the following components:

• Ceramic monolith of a honeycomb design to allow free air flow and maximum surface area, coated with precious metals to enable the conversion of gasses that pass through it
• Interam matting to hold the monolith in place. The matting expands when exposed to heat to supply the pressure needed to keep the monolith secure
• A grade 409 stainless steel can (or housing) to provide protection and enable the cat to be built into the exhaust system. 409 grade can contain upto 90% iron and will be prone to rust. It still has higher rust-resistant properties than mild steel.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

92811321904

The product you are viewing cross references to these numbers

Exhaust catalytic converter.



Fits:
PORSCHE 944S 2.5i (M44.40 engine) 1/86-7/88
PORSCHE 944S2 3.0i (M44.41 engine) 8/88-7/92

A grade 409 stainless steel can (or housing) to provide protection and enable the cat to be built into the exhaust system. 409 grade can contain upto 90% iron and will be prone to rust. It still has higher rust-resistant properties than mild steel.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94411198904

The product you are viewing cross references to these numbers

Performance silicone ancillary hose kit.
Available in: Red, Blue or Black.



Fits:
Porsche 944S 16V 2.5Ltr 187BHP 1987-1989 Induction

• Premium quality, Hand crafted silicone hoses
• Made from the finest quality European silicone
• Directly replace original rubber hoses

Performance silicone coolant hose kit.
Available in: Red, Blue or Black.

Fits:
Porsche 944S 16v 2.5Ltr Engine 187Bhp 1987-1989 Coolant

• Premium quality, Hand crafted silicone hoses
• Made from the finest quality European silicone
• Directly replace original rubber hoses

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TCS-435

The product you are viewing cross references to these numbers

Performance silicone ancillary hose kit.
Available in: Red, Blue or Black.



Fits:
Porsche 944S 16V 2.5Ltr 1987-1989 Ancillary

• Premium quality, Hand crafted silicone hoses
• Made from the finest quality European silicone
• Directly replace original rubber hoses

Silicone Throttle Body Resonator Delete Hose to suit Porsche 996 / 911 Carrera 4, 3.6Ltr N/A, Tiptronic. (Resonator Delete, Keeps Vacuum Connection) 2002 ~ 2005



NOTE: For Tiptronic cars only

Please also add the following
1 x 0549290110
1 x 99951235002
1 x 99604000052

Installing the cold air performance enhancement kit will make any standard 996 with factory mufflers sound as if you have added a very mild performance exhaust. This is perfect for any 996 owner that wants his car to sound slightly more aggressive than stock.

The cold air kit adds 1.5 liters of cold air by eliminating the plastic factory muffler in air pipe, this allows the engine to draw cold air across entire topside of air box (left and right rather than just from the right) Adds 0.42 seconds faster acceleration 3000-6000 RPM.

The cold air kit is made from 4 ply silicone tube - better flow from air box to throttle body.

No "Check engine" lights as you retain the factory MAF.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

TB-5570

The product you are viewing cross references to these numbers

Complete exhaust system for Porsche 964 incl. TÜV and electronic controlled valve.

Fits:
Porsche 964

This system is made of stainless steel and comes with all accessories and mounting material. In addition, it has an electronically controlled flap to the sound to change. The flap can be adjusted via a remote control)

Among the pictures of the complex is a performance chart which power (PS) and torque (Nm) outputs with open and closed flap!

Here the sound files become the APPENDIX valve
1) Sound File closed valve: LISTEN HERE
1) Sound File open valve: LISTEN HERE

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009402

The product you are viewing cross references to these numbers

Exhaust Manifold / Header



Fits:
Porsche 987 Boxster 2005- 08/2008
Porsche 987C Cayman 2006- 08/2008

DesignTek sports headers and 200 cell high flow cats for throaty sports car sound, but not too loud for every day driving, manufactured from extra heavy duty stainless steel, which eliminates the splitting, cracking and annoying resonance.

Coating: 40g
Cells: 200cpsi

Please note: These sport cats will make your car sound louder than with stock cats. If you have ,or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109874

The product you are viewing cross references to these numbers

A Voucher for £100 available when you buy this product. For more information CLICK HERE

Exhaust catalytic converter bypass X-Pipes with cat cheats. This cat bypass would not bring the engine light on but will fail any exhaust emission test.
Please note this is a catalytic converter look exhaust that is in fact bypass with built in small chamber that has got catalyst inside it. The emissions will be picked up from the chamber and readings would be as from regular catalyst.

Fits:

Porsche 997 Carrera 2 3.6L 2005>>

Porsche 997 Carrera 2S 3.8L 2005>>

Porsche 997 Carrera 4 3.6L 2005>>

Porsche 997 Carrera 4S 3.8L 2005>>

DesignTek sports racing catalytic converters give a HORSEPOWER and TORQUE gain to all 997 cars. High Quality T304 SS C.N.C. mandrel bent tubing for maximum exhaust flow.

DesignTek sports racing catalytic converters for less restriction and more power and more sports car sound. Simple bolt-on direct replacement sports cats for the factory OEM Porsche catalytic converters.


Fits:
Porsche 997 Carrera 3.6L / 3.8L

Please note:
*These sport cats will make your car sound louder than with stock cats. If you have, or intend to install sport silencers, you may find the car is a bit loo loud. We recommend to use one sport exhaust component if you are concerned about decibel levels.

*Not compatible with GT3 style centre exit tailpipe conversion Part number: 3606609701 

NOTE: Sports catalytic converters and bypass pipes do not have type approval and are not legally permitted for use on vehicles manufactured after 1st March 2001 in the United Kingdom. They are not MOT compliant and must not be used on public roads. These components are intended for race and track use only. If you are located outside the UK, please consult your local laws and regulations to ensure compliance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606109976

The product you are viewing cross references to these numbers

Induction alloy insert for Throttle Body Resonator Delete Hose part no TB-5570.

52mm

Fits: Porsche 996 C2 / C4 / C4S 1997-2004

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99604000052

The product you are viewing cross references to these numbers

Exhaust centre back box. replacement for the original factory muffler. Standard factory sound. In stainless steel. Original Porsche part is no longer available.



Made by DesignTek

Fits:
Porsche 964 C2 / C4 1990-94

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3606009401

The product you are viewing cross references to these numbers

DesignTek 7mm SET OF 2 Hub-Centric Wheel Spacers



These Wheel spacers are precision engineered to fit the wheel to the hub with the best possible accuracy. All sizes include the porsche style hub centric locking fingers and notches on the back for easy removal of the spacers.

Material: Anodized 6061-T6 aluminum
Finish: Anodized
Weight: 0.44 lbs / 0.20 kg. per spacer
Installation: Mounts to hub. Longer studs may be necessary depending upon spacer size. Fits Porsche hubs with three fingered centering ring. Will not fit Porsche hubs with solid centering ring.

Miscellaneous: Two wheel spacers per package, longer studs not included.

*Will not work on 718/992 with 5 tab hubs. These will only work on three tab hubs. Please check your hubs before ordering.
** Will not fit front of some 928 & 944 models


Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

3608000HC7

The product you are viewing cross references to these numbers