Enter your VAT number here and click Verify:
Your details have been verified. VAT number registered to:
,
.
Your order will now be zero rated for VAT purposes. We reserve the right to verify these details after your order request has been made and reinstate VAT if required.
Your VAT details were not recognised or were invalid. Your VAT number must be matched to your Billing Country as specified above. This is currently specified as . You do not need to enter the country code part of your VAT number as this has already been selected in your billing address details above.
The VAT number checking service is currently offline. Please supply your VAT details within the comments or special instructions field below and we will apply a VAT discount after placing your order request.
Brembo Racing
Brembo Racing for Porsche
Brembo Racing is a leading name in high-performance braking, trusted on track and in motorsport, and widely used on Porsche models. At Design911 we supply a focused range of Brembo Racing parts for Porsche, backed by specialist Porsche knowledge and support.
A Quick Look at Brembo Racing
Brembo Racing information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.
Choosing the Right Fit for Your Porsche
Where Brembo Racing is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.
- Typical reasons to upgrade include reducing brake fade, improving modulation, and maintaining stable braking over repeated hard stops.
- Common symptoms that prompt replacement are cracked or heat-spotted discs, brake fade, and inconsistent pedal feel.
- Some kits are more track-focused and may create extra noise or dust, so always check the product notes if you plan to use the car mainly on the road.
- Brake performance depends on the full system – pads, discs, fluid, lines, cooling, and setup – not just a single component.
- Dedicated brake cooling is often beneficial for hard track use to keep temperatures under control.
Browse by Category
If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.
Brakes — Brake components are renewed to restore stopping performance, address wear or upgrade a Porsche for fast road or track use. Common symptoms include vibration under braking, increased stopping distances, squealing, pulling to one side, warning lights and visible wear to discs and pads.
- Check product details to see whether parts are OE-equivalent replacements or performance upgrades, and follow any bedding-in guidance supplied.
- Review whether discs, pads, and fitting hardware should be replaced together for your particular setup.
Brembo Racing brakes — Brembo Racing brakes are selected for track and competition use where higher temperatures and loads demand stronger calipers, discs and pads. Standard systems may show severe fade, cracked discs, boiling fluid and rapid pad wear during circuit use.
- Confirm whether a given kit is intended for road, track, or mixed use, and check any guidance on wheel size, brake bias, or additional cooling.
- Follow recommended inspection and servicing intervals if the car sees regular track time.
Brembo GT DRILLED Brake Kits — Brembo GT drilled kits are full big-brake upgrades providing larger discs and multi-piston calipers for improved performance and appearance. Factory brakes may be undersized for tuned engines, heavy track use or repeated high-speed stops, leading to fade and disc discolouration.
- Review kit contents to see what is included (such as calipers, discs, pads, hoses and brackets) and confirm Porsche model and wheel compatibility.
- Professional fitting is recommended where significant braking performance changes are involved.
Brembo GT SLOTTED Brake Kits — Brembo GT slotted kits suit drivers preferring slots instead of drillings for better crack resistance and consistent pad cleaning on track. Standard discs may glaze pads and suffer from heat-related issues when driven hard.
- Compare slotted and drilled options to choose the setup that best matches your usage and pad choice.
- Check whether any changes to shields, guards, hubs or lines are required before ordering.
Brembo Track Day 2pcs Discs — Brembo Track Day two-piece discs offer improved cooling and reduced unsprung weight for drivers who regularly attend track days. One-piece discs may warp or crack under sustained high temperatures, and heavy discs can blunt suspension response.
- Verify whether the discs are floating or fixed, and that they bolt up to your existing hubs and calipers.
- Select pad compounds recommended for your use, and confirm if rings can be replaced separately from the hats.
Explore Brembo Racing at Design911
View the current Brembo Racing range for Porsche at Design911, then filter by model and category to narrow down to the right parts.
Discs: 328x28 DRILLED
Caliper type: C - 2 piece caliper with 4 Pistons


Fits:
Porsche 964 Carrera 2 1990-94 Rear
Porsche 964 Carrera 4 1989-94 Rear
Kit Contains:
2 x Brake disc size: 328x28
Brake disc type: 2-Piece Drilled
2 x Brake calipers type: C - 2 piece caliper with 4 Pistons
1 x Brake pads set
2 x Stainless steel brake hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2C1.6017A
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
Discs: 328x28 DRILLED
Caliper type: C - 2 piece caliper with 4 Pistons


Fits:
Porsche 928 S4 / GT 1987-91 Rear
Kit Contains:
2 x Brake disc size: 328x28
Brake disc type: 2-Piece Drilled
2 x Brake calipers type: C - 2 piece caliper with 4 Pistons
1 x Brake pads set
2 x Stainless steel Brake Hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
2C1.6016A
The product you are viewing cross references to these numbers
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
Discs: 355x32 SLOTTED
Caliper type: B - 2 piece caliper with 4 Pistons


Fits:
Porsche 986 Boxster 1997-2004 Front
Porsche 987.1 Boxster 2005-2008 Front
Porsche 987.2 Boxster 2009-2012 Front
Porsche 987C.1 Cayman 2006-2008 Front
Porsche 987C.2 Cayman 2009-2012 Front
Porsche 987C.2 Cayman R 2012 Front
Porsche 996 C2 1999-04 Front
Porsche 997 C2 2005-2011 Front
*not for cars with PCCB Ceramic brakes
Kit Contains:
2 x Brake Disc Size: 355x32
Brake Disc Type: 2-Piece SLOTTED
2 x Brake Calipers Type: B - 2 piece caliper with 4 Pistons
1 x Brake pads set
2 x Stainless steel Brake Hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1B2.8016A
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Discs: 355x32 SLOTTED
Caliper type: B - 2 piece caliper with 4 Pistons


Fits:
Porsche 993 C2 / C4 1995-98
Porsche 993 C2S / C4S 1995-98
Porsche 993 TURBO 1995-98
Kit Contains:
2 x Brake Disc Size: 355x32
Brake Disc Type: 2-Piece SLOTTED
2 x Brake Calipers Type: B - 2 piece caliper with 4 Pistons
1 x Brake pads set
2 x Stainless steel Brake Hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1B2.8022A
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
Discs: 355x32 SLOTTED
Caliper type: B - 2 piece caliper with 4 Pistons

Fits:
Porsche 930 Turbo 3.3L 1980-89 Front
Kit Contains:
2 x Brake Disc Size: 355x32
Brake Disc Type: 2-Piece SLOTTED
2 x Brake Calipers Type: B - 2 piece caliper with 4 Pistons
1 x Brake pads set
2 x Stainless steel Brake Hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1B2.8023A
The product you are viewing cross references to these numbers
- Porsche 911 1978-1989 3.3L Turbo (930)
Discs: 355x32 SLOTTED
Caliper type: B - 2 piece caliper with 4 Pistons


Fits:
Porsche 965 Turbo 3.3L / 3.6L Front
Kit Contains:
2 x Brake Disc Size: 355x32
Brake Disc Type: 2-Piece SLOTTED
2 x Brake Calipers Type: B - 2 piece caliper with 4 Pistons
1 x Brake pads set
2 x Stainless steel Brake Hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1B2.8026A
The product you are viewing cross references to these numbers
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93
Discs: 355x32 SLOTTED
Caliper type: B - 2 piece caliper with 4 Pistons


Fits:
Porsche 996 C4 1999-04 Front
Porsche 997 C4 2005-2011 Front
*not for cars with PCCB Ceramic brakes
Kit Contains:
2 x Brake Disc Size: 355x32
Brake Disc Type: 2-Piece SLOTTED
2 x Brake Calipers Type: B - 2 piece caliper with 4 Pistons
1 x Brake pads set
2 x Stainless steel Brake Hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1B2.8033A
The product you are viewing cross references to these numbers
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MKII Carrera C4 3.6L 2009-12
Discs: 332x32 SLOTTED
Caliper type: H - 2 piece caliper with 4 Pistons


Fits:
Porsche 964 Carrera 2 1990-94 Front
Porsche 964 Carrera 4 1989-94 Front
Kit Contains:
2 x Brake Disc Size: 332x32
Brake Disc Type: 2-Piece SLOTTED
2 x Brake Calipers Type: H - 2 piece caliper with 4 Pistons
1 x Brake pads set
2 x Stainless steel Brake Hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1H2.7004A
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
Discs: 355x32 SLOTTED
Caliper type: H - 2 piece caliper with 4 Pistons


Fits:
Porsche 928 S4 / GT 1987-91 Front
Kit Contains:
2 x Brake Disc Size: 355x32
Brake Disc Type: 2-Piece SLOTTED
2 x Brake Calipers Type: H - 2 piece caliper with 4 Pistons
1 x Brake pads set
2 x Stainless steel Brake Hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1H2.8008A
The product you are viewing cross references to these numbers
- Porsche 928S4 5.0L 1987-92
- Porsche 928GT 5.0L 1989-91
Discs: 355x32 SLOTTED
Caliper type: H - 2 piece caliper with 4 Pistons


Fits:
Porsche 964 Carrera 2 1990-94 Front
Porsche 964 Carrera 4 1989-94 Front
Kit Contains:
2 x Brake Disc Size: 355x32
Brake Disc Type: 2-Piece SLOTTED
2 x Brake Calipers Type: H - 2 piece caliper with 4 Pistons
1 x Brake pads set
2 x Stainless steel Brake Hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1H2.8011A
The product you are viewing cross references to these numbers
- Porsche 964 (911) C2 1989-93
- Porsche 964 (911) C4 1989-93
Discs: 355x32 SLOTTED
Caliper type: M - Cast monobloc caliper with 6 pistons


Fits:
Porsche 993 Carrera 2 / 4 1995-98 Front
Porsche 993 Carrera 2S / 4S / Turbo 1995-98 Front
Kit Contains:
2 x Brake Disc Size: 355x32
Brake Disc Type: 2-Piece SLOTTED
2 x Brake Calipers Type: M - Cast monobloc caliper with 6 pistons
1 x Brake pads set
2 x Stainless steel Brake Hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1M2.8001A
The product you are viewing cross references to these numbers
- Porsche 993 (911) C2 1994-97
- Porsche 993 (911) C4 1994-97
- Porsche 993 (911) C2S 1994-97
- Porsche 993 (911) C4S 1994-97
- Porsche 993 (911) TURBO 1994-96
Discs: 355x32 SLOTTED
Caliper type: M - Cast monobloc caliper with 6 pistons


Fits:
Porsche 986 Boxster 1997-2004 Front
Porsche 987.1 Boxster 2005-2008 Front
Porsche 987.2 Boxster 2009-2012 Front
Porsche 987C.1 Cayman 2006-2008 Front
Porsche 987C.2 Cayman 2009-2012 Front
Porsche 987C.2 Cayman R 2012 Front
Porsche 996 C2 1999-04 Front
Porsche 997 C2 2005-2011 Front
*not for cars with PCCB Ceramic brakes
Kit Contains:
2 x Brake Disc Size: 355x32
Brake Disc Type: 2-Piece SLOTTED
2 x Brake Calipers Type: M - Cast monobloc caliper with 6 pistons
1 x Brake pads set
2 x Stainless steel Brake Hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1M2.8002A
The product you are viewing cross references to these numbers
- Porsche Boxster 986 2.5L 1997-99
- Porsche Boxster 986 2.7L 1999-02
- Porsche Boxster S 986 3.2L 1999-02
- Porsche Boxster 986 2.7L 2003-04
- Porsche Boxster S 986 3.2L 2003-04
- Porsche Boxster 987 2.7L 2005 -08/08
- Porsche Boxster 987 S 3.2/3.4L 2005-08/08
- Porsche Boxster 987 MKII 2.9L 2009-2012
- Porsche Boxster S 987 MKII 3.4L 2009-2012
- Porsche 996 C2 3.4L 1997-08/01
- Porsche 996 C2 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 2 3.6L 2005-08
- Porsche 997 MKII Carrera C2 3.6L 2009-12
- Porsche Cayman 2.7L 987C 2006-08
- Porsche Cayman S 3.4L 987C 2005-08
- Porsche Cayman 2.9L 987C MKII 2009-12
- Porsche Cayman S / R 3.4L 987C MKII 2009-12
Discs: 355x32 SLOTTED
Caliper type: M - Cast monobloc caliper with 6 pistons


Fits:
Porsche 996 C4 1999-04 Front
Porsche 997 C4 2005-2011 Front
*not for cars with PCCB Ceramic brakes
Kit Contains:
2 x Brake Disc Size: 355x32
Brake Disc Type: 2-Piece SLOTTED
2 x Brake Calipers Type: M - Cast monobloc caliper with 6 pistons
1 x Brake pads set
2 x Stainless steel Brake Hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1M2.8003A
The product you are viewing cross references to these numbers
- Porsche 996 C4 3.4L 1997-08/01
- Porsche 996 C4 3.6L 09/01-2005
- Porsche 997 MK1 Carrera 4 3.6L 2005-08
- Porsche 997 MKII Carrera C4 3.6L 2009-12
Discs: 355x32 SLOTTED
Caliper type: M - Cast monobloc caliper with 6 pistons


Fits:
Porsche 997 C2S 2005-2011 Front
*not for cars with PCCB Ceramic brakes
Kit Contains:
2 x Brake Disc Size: 355x32
Brake Disc Type: 2-Piece SLOTTED
2 x Brake Calipers Type: M - Cast monobloc caliper with 6 pistons
1 x Brake pads set
2 x Stainless steel Brake Hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1M2.8004A
The product you are viewing cross references to these numbers
- Porsche 997 MK1 Carrera 2S 3.8L 2005-08
- Porsche 997 MKII Carrera C2S 3.8L 2009-12
Discs: 355x32 SLOTTED
Caliper type: M - Cast monobloc caliper with 6 pistons


Fits:
Porsche 981.1 Boxster 2012-2016 Front
Porsche 981C.1 Cayman 2013-2016 Front
*not for cars with PCCB Ceramic brakes
Kit Contains:
2 x Brake Disc Size: 355x32
Brake Disc Type: 2-Piece SLOTTED
2 x Brake Calipers Type: M - Cast monobloc caliper with 6 pistons
1 x Brake pads set
2 x Stainless steel Brake Hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1M2.8048A
The product you are viewing cross references to these numbers
- Porsche Boxster 981 2.7L 2012-16
- Porsche Boxster 981 S / GTS 3.4L 2012-16
- Porsche Cayman 2.7L 981 2013-16
- Porsche Cayman S / GTS 3.4L 981 2013-16
- Porsche Cayman GT4 3.8L 2015-16
Discs: 355x32 SLOTTED
Caliper type: M - Cast monobloc caliper with 6 pistons


Fits:
Porsche 965 TURBO 1991-1994 3.3L / 3.6L Front
Kit Contains:
2 x Brake Disc Size: 355x32
Brake Disc Type: 2-Piece SLOTTED
2 x Brake Calipers Type: M - Cast monobloc caliper with 6 pistons
1 x Brake pads set
2 x Stainless steel Brake Hose
1 x Fitting brackets & bolts
This line is dedicated to the most demanding customers.
This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
Additional Notes:
Please check Caliper Clearance Guide for more information. CLICK HERE
This product is a special order item, allow 8-12 WEEKS delivery time. Built to specifications.
Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.
1M2.8050A
The product you are viewing cross references to these numbers
- Porsche 964 (911) TURBO 3.3L 1991-93
- Porsche 964 (911) TURBO 3.6L 1991-93