Please wait… 
Please wait while we process your order,
do not press the back button… 
Design 911 Design 911 supply Porsche parts, Porsche spares and Porsche accessories, to both retail and to the trade. Our Porsche product and accessory range includes brakes, exhausts, tyres, wheels and Porsche panels and interiors. https://design91.uk/images/schemaLogo.png https://design91.uk/images/schemaLogo.png +443456003478 https://design91.uk Facebook Instagram

Bosch

Bosch
About Bosch

Bosch for Porsche

Bosch parts for Porsche models from Design911, focusing on ignition, engine electrical, and key service items that help keep your car starting, running, and driving as it should.

A Quick Look at Bosch

Bosch information on this page is based on details supplied by the manufacturer or distributor, plus any OE references provided with the parts.

Choosing the Right Fit for Your Porsche

Where Bosch is listed for Porsche, use the supplied model coverage and OE references to confirm suitability. Check details that commonly affect fitment such as model year, side/position, and connector type where relevant.

  • Typical reasons to choose Bosch include improving reliability of sensors, ignition parts, and service components so that warning lights, hard starting, and poor running are less likely to reappear after repair.
  • Common symptoms that lead to replacement include misfires, rough idle, hard starting, poor fuel economy, and intermittent or persistent sensor-related fault codes.
  • Before replacing a part again, it is sensible to check battery voltage, wiring, connectors, and for vacuum or air leaks, as these often cause repeat issues even with new components.
  • Where available, using live diagnostic data and carefully inspecting connectors helps confirm faults before you fit Bosch parts, reducing guesswork and unnecessary replacements.

Browse by Category

If you already know the area you are working on, start with the category and then filter by Porsche model. Where real-world symptoms and typical reasons to replace are provided, use them to keep the wording grounded.

Engine Electrical — Engine electrical parts cover starting, charging, ignition, and many of the sensors and control components that keep your Porsche running smoothly; they are often replaced when diagnosing no-starts, misfires, charging issues, and warning lights, and Bosch is frequently chosen for known-quality engine management parts where listed.

  • Check battery condition, grounds, and connector corrosion before condemning multiple components.
  • Use fault codes as a guide but confirm with testing rather than replacing parts blindly.

Distributor Cap — Distributor caps are a wear item in older Porsche ignition systems; they are changed when chasing misfires, rough idle, damp-weather starting problems, or visible corrosion and tracking, and Bosch caps can be a suitable choice where specified for consistent spark distribution.

  • Inspect inside the cap for dark tracking lines, cracks, and terminal corrosion if you notice misfires, especially in wet conditions.
  • Consider replacing the cap together with the rotor so that both wear items are refreshed at the same time.

Ignition Coil — A single ignition coil is typically replaced when there are misfires under load, rough running as the engine warms up, or visible damage and leakage, and selecting a Bosch coil where applicable helps restore strong, consistent spark energy.

  • Heat-related failures may only show when the engine is hot, so test and observe symptoms at full operating temperature.
  • Check plugs and leads as part of diagnosis, as excessive resistance can overload coils and lead to repeat failures.

Service Parts — Service parts such as filters, plugs, and ignition items are renewed as routine maintenance to maintain performance, economy, and reliability; Bosch components are often used where their specification matches Porsche requirements.

  • Regular servicing with quality parts can resolve multiple overlapping issues like hard starting, poor economy, and rough idle in one step.
  • Keeping a dated service record helps future diagnostics and supports the car’s long-term value.

Ignition Coils — Sets or kits of ignition coils are fitted when misfires are present across cylinders, when the history is unknown, or as a reliability refresh, and Bosch coils can be an option where listed to match or complement Porsche ignition strategies.

  • If one old coil has failed and others are the same age, renewing them together can reduce repeat misfire call-backs.
  • Inspect coil boots and connectors carefully for cracks and tracking, and confirm spark plug specification before fitting new coils.

Explore Bosch at Design911

View the current Bosch range for Porsche at Design911, then filter by model and category to narrow down to the right parts.

DISPLAYING 81 to 96 (of 270 products)
<< 5 6 7 8 >>
Special Offer
98760616502/1
Product Information
Product Information
Air mass / flow sensor.

bosch

Fits:
Porsche 987.2 Boxster / Boxster S 2009-12
Porsche 987C.2 Cayman / Cayman S 2009-12

A mass airflow sensor is used to determine the mass of air entering an electronically fuel-injected engine. The air mass information is necessary for the engine control unit (ECU) to calculate and deliver the correct fuel mass to the engine. Air changes its density as it expands and contracts with temperature and pressure. In automotive applications, air density varies with the ambient temperature and altitude, and this is an ideal application for a mass sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98760616502
98760616502
98760616501
98760616500
0280218218

The product you are viewing cross references to these numbers
96411023520/1
Product Information
Product Information
Fuel injector.
6 per car. Price is for each.

bosch

Fits:
Porsche 964 Turbo 3.6L (M64.50)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

96411023520
96411023520
0 437 502 057
0437502057

The product you are viewing cross references to these numbers
Special Offer
95560612341/1
Product Information
Product Information
Air mass / flow sensor.

bosch

Fits:
Porsche 957 Cayenne V8 4.8L S / GTS MKII

A mass airflow sensor is used to determine the mass of air entering an electronically fuel-injected engine. The air mass information is necessary for the engine control unit (ECU) to calculate and deliver the correct fuel mass to the engine. Air changes its density as it expands and contracts with temperature and pressure. In automotive applications, air density varies with the ambient temperature and altitude, and this is an ideal application for a mass sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95560612341
95560612340
0280218198
95560612341

The product you are viewing cross references to these numbers
Special Offer
95560612336/1
Product Information
Product Information
Air mass / flow sensor.

bosch

Fits:
Porsche 955 Cayenne 3.2L 2003-06
Porsche 957 Cayenne 3.6L 2007-10

A mass airflow sensor is used to determine the mass of air entering an electronically fuel-injected engine. The air mass information is necessary for the engine control unit (ECU) to calculate and deliver the correct fuel mass to the engine. Air changes its density as it expands and contracts with temperature and pressure. In automotive applications, air density varies with the ambient temperature and altitude, and this is an ideal application for a mass sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

95560612336
95560612336
95560612335
0280218141
95560612337

The product you are viewing cross references to these numbers
Special Offer
94460611500/1
Product Information
Product Information
Impulse / speed reference sensor.

bosch

Fits:
Porsche 928
Porsche 924S
Porsche 944
Porsche 968

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

94460611500
94460611500
0261210003

The product you are viewing cross references to these numbers
93160290600/2
Product Information
Product Information
Rotor arm.

bosch

Fits:
Porsche 924 Turbo 1981>>

The "rotor" head is attached to the top of the distributor shaft which is driven by a gear on the engine's camshaft and thus synchronized to it. This rotor is pressed against a carbon brush on the centre terminal of the distributor cap which connects to the ignition coil either through the top and wired directly to the coil in HEI systems, or via the centre terminal in points ignition systems and remotely connected to the coil.

The rotor is constructed such that the centre tab is electrically connected to its outer edge so that voltage coming in to the centre post travels through the carbon point to the outer edge of the rotor. As the camshaft rotates, the rotor spins and its outer edge passes each of the internal plug terminals to fire each spark plug.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93160290600
93160290600
1234332309

The product you are viewing cross references to these numbers
Special Offer
93060811301/2
Product Information
Product Information
Fuel pump. Porsche 930 Turbo / 928 /  965 Turbo

bosch

Fits:
Porsche 930 Turbo 1977-89 (Rear)
Porsche 928 1978-82
Porsche 965 Turbo 3.3L / 3.6L (Rear)

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93060811301
93060811300
0580464201
0580254979
99362010480
93060811101

The product you are viewing cross references to these numbers
Special Offer
93060291901/2
Product Information
Product Information
Distributor cap. Porsche 964 / 993
Two per car. Sold each.

bosch

Fits:
Porsche 964 1989-94
Porsche 993 09/1989 - 08/1997

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

93060291901
93060291901
1691200202
1235522413

The product you are viewing cross references to these numbers
Special Offer
97060617301/1::1
Product Information
Product Information
Lambda oxygen sensor

bosch

Fits:
Porsche 970 Panamera 3.6L 2011-16 (AFTER catalytic converter)
Porsche 970 Panamera S 4.8L 2010-13 (AFTER catalytic converter)
Porsche 970 Panamera GTS 4.8L 2013-16 (AFTER catalytic converter)
Porsche 970 Panamera TURBO/S 4.8L 2010-16 (After catalytic converter)

Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.

Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail

Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97060617301
97060617201
97060617301

The product you are viewing cross references to these numbers
Special Offer
97060617
Product Information
Product Information
Lambda oxygen sensor.

Fits:
Porsche 970 Panamera Turbo 4.8L 2011-16 (AFTER catalytic converter)

Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.

Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail

Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97060617
97060617201
97060617301

The product you are viewing cross references to these numbers
Special Offer
97060617900/1
Product Information
Product Information
Lambda oxygen sensor.

bosch

Fits:
Porsche 970 Panamera DIESEL 3.0L 2012-16 (in front of catalytic converter)
* I161 - Emission Concept EU 4 with OBD
* I165 - Emission Concept EU 5

Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.

Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail

Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

97060617900
97060617900
0281004407

The product you are viewing cross references to these numbers
Special Offer
98660622600/2
Product Information
Product Information
Lambda oxygen sensor.

bosch

Fits:
Porsche Boxster 986 2003>>

Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.

Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail

Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98660622600
98660622600
0258006506
98660622601

The product you are viewing cross references to these numbers
Special Offer
98760612304/1
Product Information
Product Information
Lambda oxygen sensor. There is 4 oxygen sensors per car. 2 Before cats and 2 after cats.
Sold each - 2 per car. These are positioned before the catalytic converters

bosch

Fits:
Porsche Boxster 987 2.7ltr >>2007 (BEFORE catalytic converter)
Porsche Boxster S 987  3.2ltr >>2007 (BEFORE catalytic converter)
Porsche 997 GT3 2007-09 (BEFORE catalytic converter)

Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.

Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail

Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

98760612304
98760612304
98760612303
98760612301

The product you are viewing cross references to these numbers
Special Offer
99360611801/1
Product Information
Product Information
Lambda oxygen sensor.

bosch

Fits:
Porsche 996 2000-02 (AFTER catalytic converter)
*Cars with M661 stricter emission control concept

Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.

Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail

Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99360611801
99360611801
258003723

The product you are viewing cross references to these numbers
Special Offer
99360612701/1
Product Information
Product Information
Lambda oxygen sensor

bosch

Fits:
Porsche 993 Turbo (AFTER catalytic converter)

Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.

Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail

Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99360612701
99360612701
0258003577

The product you are viewing cross references to these numbers
Special Offer
99360612801/1
Product Information
Product Information
Lambda oxygen sensor

bosch

Fits:
Porsche 993 Turbo (BEFORE catalytic converter)
Porsche 996 C2/4 >>01 (BEFORE catalytic converter)
Porsche 996 GT3 >>03 (BEFORE catalytic converter)

Function:
The Oxygen Sensor (also known as Lambda Sensor) is located in the exhaust manifold and measures the amount of unburned oxygen in your engine's exhaust. Based on the amount of oxygen, it sends a signal to your engine computer which then adjusts the air/fuel mixture for optimum engine performance and emission control.

Failure Symptoms:
• Excessive fuel consumption, a faulty oxygen sensor can waste 30% of your fuel.
• Driveability problems, such as engine surging or hesitation.
• High hydrocarbon emissions, failing an emissions inspection.
• The engine warning light may be on or service flag displayed.
• The ecu/computer stores a mixture-related fault code.
• When the oxygen sensor has stopped functioning completely, the catalytic converter may overheat and fail

Maintenance / Service:
• Test and/or replace every 30,000 miles.
• Perform periodic emission checks.
• Watch for service light.
• Vehicle manufacturers recommend periodic inspection and replacement of oxygen sensor.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

99360612801
99360612801
258003564
99360611700
99360611800
99360611801
99360612700
99360612701
99360612800
99360612801
99660611800

The product you are viewing cross references to these numbers
DISPLAYING 81 to 96 (of 270 products)
<< 5 6 7 8 >>