Bilstein

Bilstein B16 DampTronic Coilover Suspension Kits.

Fits:
Porsche 991.1 all models 

Porsche 991.2 all models 

Additional Notes:
- Cars with Porsche lift system on the front axle and PASM (Porsche Active Suspension Management)
- Lowers Front: 30mm; axle load to: 825 kg
- Lowers Rear: 25mm-40mm; axle load to: 1260 kg

Not only engine performance but, above all, suspension technology contributes to the fascination of a Porsche sports car. Bilstein offers an exclusive range of active coil over systems in mono-tube/inverted technology suspension systems for individualisation of the current Porsche models with PASM: Porsche 911 (C2, C4,Turbo and GT3), Porsche Boxster and Porsche Cayman. The coil over system is electronically adjustable. So PASM-function and car sensors like PSM stays fully in function. In addition the height-adjustment offers a certified range of lowering.

Discreet sporty looks and precisely defined response within both setup modes, accompanied by high driving dynamics and excellent residual ride comfort. Regardless of whether in daily motoring, on the Nordschleife of the Nürburgring at the weekend, in training courses or in club sports - it's all pure driving enjoyment!

Product advantages at a glance:

- BILSTEIN mono-tube/inverted technology
- PASM-function and car sensors remain fully active
- BILSTEIN road tested and tuned
- High driving dynamics with good ride comfort
- Discreet sporty appearance
- Threaded chassis certified range of adjustment
- German TüV certificate

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

49-279047

The product you are viewing cross references to these numbers

Bilstein B16 DampTronic coilover suspension kit.

Fits:

Porsche 981 Boxster 2.7L / Boxster S 3.4L - 2012 to 2016
Porsche 981 Cayman 2.7L / Cayman S 3.4L - 2012 to 2016

Porsche 718 Boxster / Boxster S / Boxster T / Boxster GTS - 2017 Onwards
Porsche 718 Boxster GTS 4.0ltr / - 2017 Onwards
Porsche 718 Cayman / Cayman S / Cayman T / Cayman GTS - 2017 Onwards
Porsche 718 Cayman GTS - 2017 Onwards
Cars without electronic suspension control;
Cars without PASM

Additional Notes:
- Lowers Front: 0-20mm
- Lowers Rear: 10-25mm
- For cars with PASM

Not only engine performance but, above all, suspension technology contributes to the fascination of a Porsche sports car. Bilstein offers an exclusive range of active coil over systems in mono-tube/inverted technology suspension systems for individualisation of the current Porsche models with PASM: Porsche 911 (C2, C4,Turbo and GT3), Porsche Boxster and Porsche Cayman. The coil over system is electronically adjustable. So PASM-function and car sensors like PSM stays fully in function. In addition the height-adjustment offers a certified range of lowering.

Discreet sporty looks and precisely defined response within both setup modes, accompanied by high driving dynamics and excellent residual ride comfort. Regardless of whether in daily motoring, on the Nordschleife of the Nürburgring at the weekend, in training courses or in club sports - it's all pure driving enjoyment!

Product advantages at a glance:

- BILSTEIN mono-tube/inverted technology
- PASM-function and car sensors remain fully active
- BILSTEIN road tested and tuned
- High driving dynamics with good ride comfort
- Discreet sporty appearance
- Threaded chassis certified range of adjustment
- German TüV certificate

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

49-275605

The product you are viewing cross references to these numbers

Bilstein B16 DampTronic Coilover Suspension Kits

Fits:
Porsche Macan 2.0L Petrol
Porsche Macan S / GTS 3.0L Petrol
Porsche Macan 3.0L Diesel
Porsche Macan Turbo 3.6L Petrol

Additional Notes:
- Lowers Front: 30-50mm
- Lowers Rear: 30-50mm
- For cars with PASM

Not only engine performance but, above all, suspension technology contributes to the fascination of a Porsche sports car. Bilstein offers an exclusive range of active coil over systems in mono-tube/inverted technology suspension systems for individualisation of the current Porsche models with PASM: Porsche 911 (C2, C4,Turbo and GT3), Porsche Boxster and Porsche Cayman. The coil over system is electronically adjustable. So PASM-function and car sensors like PSM stays fully in function. In addition the height-adjustment offers a certified range of lowering.

Discreet sporty looks and precisely defined response within both setup modes, accompanied by high driving dynamics and excellent residual ride comfort. Regardless of whether in daily motoring, on the Nordschleife of the Nürburgring at the weekend, in training courses or in club sports - it's all pure driving enjoyment!

Product advantages at a glance:

- BILSTEIN mono-tube/inverted technology
- PASM-function and car sensors remain fully active
- BILSTEIN road tested and tuned
- High driving dynamics with good ride comfort
- Discreet sporty appearance
- Threaded chassis certified range of adjustment
- German TüV certificate

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

49-246179

The product you are viewing cross references to these numbers

Bilstein B16 PSS10 Coilover Suspension Kits - Clubsport
Kit comes with front top mounts.

Fits:
Porsche 991 GT3 RS / R 4.0L 2015
Cars with engine codes:
- MA1.76
- MDG.GA

Front lowering: 10-15 mm;
Rear lowering: 5-20 mm

Bilstein Clubsport suspension kits feature ride height adjustability with 2-way manually adjustable dampers in an OE quality, direct fit package. The 2-way independent rebound and compression adjustment features 10-stages each, providing up to 100 different settings for the ultimate in handling performance under any condition. The adjustable monoball upper mounts allow the user to change camber settings to suit any road, condition or driver preference. These kits offer monotube performance dampers with matched springs that are tuned for each specific application. The zinc coated and threaded body design will give you the flexibility to find the perfect ride height setting for your intended use while providing unsurpassed protection against the harshest road elements. Bilstein Clubsport suspension kits are made in Germany and tested under motorsports conditions on the famed Nurburgring.

The BILSTEIN Clubsport suspension system is a fully street-legal, TÜV-certified high-end coilover package that is also designed for uncompromising use in the fields of racing and clubsport. This kit combines the tried-and-tested BILSTEIN mono-tube gas pressure technology with the highest levels of engineering from the field of motor sport.

The 2-way adjustable suspension system, complete with integrated reservoir, provides a significant weight advantage for racing and clubsport use compared to systems with external reservoirs. Rebound and compression forces can be adjusted independently via the two easily accessible motorsport-proven aluminum adjustment dials inside the vehicle, enabling the suspension setup to be changed quickly and accurately at all times.

With 10 click positions for rebound and 10 click positions for compression, a wide range of handling options can be selected in just seconds, allowing for instant back-to-back set-up modification and testing. The combination of adjustable wheel camber and ride height with the 100 possible valving settings, make it possible to fine-tune the suspension setup based on the specific racetrack, weather conditions and vehicle weight, as well as driver and tire specifications.

Product Benefits: 2-way damping force adjuster for independent adjustment of rebound and compression forces. Aluminum adjustment wheels with clearly identified tuning settings from 1 (soft) to 10 (hard). Color-coding: red for rebound force, blue for compression force. Manually adjustable without additional tools. Each definite click of the wheel confirms the simple and quick damping force adjustment. Wheel camber is adjustable by aluminum support bearing. Weight advantage by eliminating the need for an external oil reservoir. BILSTEIN-monotube technology developed through years of motorsport involvement. Spring plates and lock nuts made from special aluminium alloy. Quality built racing springs. Roadworthy: TÜV certificate according to Section 19 of the German Road Traffic. Licensing Regulations (StVZO). Extremely easy to install and simple to use. Can be retrofitted for racing in cooperation with BILSTEIN-Motorsport on request. Surface coating using Triple-C-Technology for long-lasting corrosion resistance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

48-256223

The product you are viewing cross references to these numbers

Bilstein B16 PSS10 Coilover Suspension Kits - Clubsport
Kit comes with front top mounts.

Fits:

Porsche 991 GT3 3.8L 2013-16

Front lowering: 10-15 mm;
Rear lowering: 5-20 mm

Bilstein Clubsport suspension kits feature ride height adjustability with 2-way manually adjustable dampers in an OE quality, direct fit package. The 2-way independent rebound and compression adjustment features 10-stages each, providing up to 100 different settings for the ultimate in handling performance under any condition. The adjustable monoball upper mounts allow the user to change camber settings to suit any road, condition or driver preference. These kits offer monotube performance dampers with matched springs that are tuned for each specific application. The zinc coated and threaded body design will give you the flexibility to find the perfect ride height setting for your intended use while providing unsurpassed protection against the harshest road elements. Bilstein Clubsport suspension kits are made in Germany and tested under motorsports conditions on the famed Nurburgring.

The BILSTEIN Clubsport suspension system is a fully street-legal, TÜV-certified high-end coilover package that is also designed for uncompromising use in the fields of racing and clubsport. This kit combines the tried-and-tested BILSTEIN mono-tube gas pressure technology with the highest levels of engineering from the field of motor sport.

The 2-way adjustable suspension system, complete with integrated reservoir, provides a significant weight advantage for racing and clubsport use compared to systems with external reservoirs. Rebound and compression forces can be adjusted independently via the two easily accessible motorsport-proven aluminum adjustment dials inside the vehicle, enabling the suspension setup to be changed quickly and accurately at all times.

With 10 click positions for rebound and 10 click positions for compression, a wide range of handling options can be selected in just seconds, allowing for instant back-to-back set-up modification and testing. The combination of adjustable wheel camber and ride height with the 100 possible valving settings, make it possible to fine-tune the suspension setup based on the specific racetrack, weather conditions and vehicle weight, as well as driver and tire specifications.

Product Benefits: 2-way damping force adjuster for independent adjustment of rebound and compression forces. Aluminum adjustment wheels with clearly identified tuning settings from 1 (soft) to 10 (hard). Color-coding: red for rebound force, blue for compression force. Manually adjustable without additional tools. Each definite click of the wheel confirms the simple and quick damping force adjustment. Wheel camber is adjustable by aluminum support bearing. Weight advantage by eliminating the need for an external oil reservoir. BILSTEIN-monotube technology developed through years of motorsport involvement. Spring plates and lock nuts made from special aluminium alloy. Quality built racing springs. Roadworthy: TÜV certificate according to Section 19 of the German Road Traffic. Licensing Regulations (StVZO). Extremely easy to install and simple to use. Can be retrofitted for racing in cooperation with BILSTEIN-Motorsport on request. Surface coating using Triple-C-Technology for long-lasting corrosion resistance.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

48-236782

The product you are viewing cross references to these numbers

Bilstein B16 PSS9 Coilover Suspension Kits.

Fits:
Porsche 986 Boxster 06/1996>>

This does not have TUV

This is for USA cars.

Bilstein B16 PSS9/10 Height & 9-Way Damping Adjustable Coilover Kit. The PSS9/10 Kit is a ride height adjustable coil-over system with 9 different damping force settings. This Coilover Suspension Kit has created an entirely new level of performance suspension. Based on the monotube inverted technology, the Bilstein B16 PSS9/10 meets the highest standards. This system features threaded body ride height adjustability, and also allows for adjustable damping in both the compression and rebound cycles. Once fitted to the car these damping settings are easily changed by turning the aluminium adjuster to fine tune for your driving style. The Bilstein B16 PSS9/10 suspension kit lowers from 10-60mm and is TUV approved.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

48-181440

The product you are viewing cross references to these numbers

Bilstein B12 Damptronic suspension kit.

Fits:
Porsche 997 3.6L C4 Cars with PASM
Porsche 997 3.8L C4S Cars with PASM
Porsche 997 3.8L TURBO Cars with PASM

Additional Notes:
- with PASM
- Front lowering: 20 mm; axle load to: 825 kg
- Rear lowering: 20 mm; axle load to: 1250 kg

For everyone who believes driving dynamics and performance are important; for drivers who prefer the extra safety as well as the drivers who appreciate a look of performance without sacrificing ride quality, the Bilstein B12 kit is the perfect choice.

Bilstein B12 Tuning Suspension Kit is a Bilstein suspension kit that offers high performance monotube gas shock absorbers that work in harmony with top quality Eibach sport springs. The Bilstein B12 suspension system produces a positive effect on traction, oversteer and understeer. By lowering the vehicle 30mm the Bilstein B12 tuning kit guarantees perfect vehicle response, including a wide range of safety, amazing driving dynamics, long durability and ride comfort. Each Bilstein B12 suspension kit is TUV approved.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

46-193797

The product you are viewing cross references to these numbers

Bilstein B12 Damptronic suspension kit. Porsche 997 C2 / C2S with PASM

Fits:
Porsche 997 3.6L C2 Cars with PASM
Porsche 997 3.8L C2S Cars with PASM

Additional Notes:
- with PASM
- Front lowering: 30 mm; axle load to: 775 kg
- Rear lowering: 30 mm; axle load to: 1220 kg

For everyone who believes driving dynamics and performance are important; for drivers who prefer the extra safety as well as the drivers who appreciate a look of performance without sacrificing ride quality, the Bilstein B12 kit is the perfect choice.

Bilstein B12 Tuning Suspension Kit is a Bilstein suspension kit that offers high performance monotube gas shock absorbers that work in harmony with top quality sport Eibach springs. The Bilstein B12 suspension system produces a positive effect on traction, oversteer and understeer. By lowering the vehicle 30mm the Bilstein B12 tuning kit guarantees perfect vehicle response, including a wide range of safety, amazing driving dynamics, long durability and ride comfort. Each Bilstein B12 suspension kit is TUV approved.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

46-193759

The product you are viewing cross references to these numbers

Bilstein B12 tuning suspension kit. Porsche 997 C2 / C2S without PASM

Fits:
Porsche 997 3.6L C2 Cars without PASM
Porsche 997 3.8L C2S Cars without PASM

Additional Notes:
- without PASM
- Front lowering: 30 mm; axle load to: 775 kg
- Rear lowering: 30 mm; axle load to: 1220 kg

For everyone who believes driving dynamics and performance are important; for drivers who prefer the extra safety as well as the drivers who appreciate a look of performance without sacrificing ride quality, the Bilstein B12 kit is the perfect choice.

Bilstein B12 Tuning Suspension Kit is a Bilstein suspension kit that offers high performance monotube gas shock absorbers that work in harmony with top quality Eibach sport springs. The Bilstein B12 suspension system produces a positive effect on traction, oversteer and understeer. By lowering the vehicle 30mm the Bilstein B12 tuning kit guarantees perfect vehicle response, including a wide range of safety, amazing driving dynamics, long durability and ride comfort. Each Bilstein B12 suspension kit is TUV approved.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

46-193742

The product you are viewing cross references to these numbers

Rear shock absorber air spring. REAR



Fits:
Porsche 95B Macan GTS

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

40-2

The product you are viewing cross references to these numbers

Shock absorber rear B4 Damptronic (PASM)
Fits to left or right side. Cars without air suspension.



Fits:
Porsche 970 Panamera 2009-16 with PASM

Porsche equivalent part numbers:
- 97033304507
- 97033304509
- 97033304510
- 97033304511
- 97033314504

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

26-256436

The product you are viewing cross references to these numbers

Shock absorber front B4 Damptronic (PASM)
Fits to left or right side. Cars WITH PASM , without air suspension.



Fits:
Porsche 970 Panamera 2009-16 with PASM

Porsche equivalent part numbers:
- 97034304504
- 97034304505
- 97034304506
- 97034304507
- 97034304508

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

26-217963

The product you are viewing cross references to these numbers

BILSTEIN B6 Sports shock absorber.



Fits:
Porsche 981 Boxster 2.7L / S 3.4L
Porsche 981 Spyder 3.8L
Porsche 981C Cayman 2.7L / S 3.4L
Porsche 718 Cayman / Boxster

Fits cars:
- without electronic suspension control

Please Note:
Price is for each damper you will need to buy 2

The shock absorber for those drivers who prefer a sports suspension but are not particularly interested in lowering the body. Also available in special design complete with reservoir for off-road vehicles.
No risk, more fun
For some people it's important to show what they have, for others it's sufficient to know that they have it. The theme of the discussion here is the sports suspension. The BILSTEIN B6 Sports shock absorber is the ideal solution for drivers revelling in the understatement . The wolf in sheep's clothing snarls, when necessary, but otherwise goes reliably about its work in daily traffic with no lowering of the body whatsoever.

Optimum road holding, enhanced tracking stabilisation and excellent damping force: the BILSTEIN B6 Sports is not only first choice as far as sports tuning is concerned but also in the sphere of safety.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

22-276773

The product you are viewing cross references to these numbers

Bilstein B4 FRONT air shock absorber with Damptronic.



Fits:
For pneumatic suspension vehicles; with electronic suspension control.

PORSCHE CAYENNE (955) 3.2 (10/03-09/07)
PORSCHE CAYENNE (955) S 4.5 (09/02-09/07)
PORSCHE CAYENNE (955) Turbo 4.5 (09/02-09/07)
PORSCHE CAYENNE (955) Turbo S 4.5 (01/04-09/07)

PORSCHE CAYENNE (957) 3.0 TDI (02/09-09/10)
PORSCHE CAYENNE (957) 3.6 (02/07-09/10)
PORSCHE CAYENNE (957) S 4.8 (02/07-09/10)
PORSCHE CAYENNE (957) Turbo S 4.8 (02/07-09/10)

Air spring bellow is reinforced with a higher quality aramid fabric instead of a nylon fabric in the original part.
Air spring head with aluminum top mount and plastic cap, instead of integrative design.

The only fully functional module for all air suspension systems in true original manufacturer quality!
 
100 % safety – for a maximum in road handling under any road condition!
100 % functionality and comfort – like on the first day!
100 % uncompromising original equipment manufacturer quality – we invented it!
100 % support for you - detailed installation instructions and videos, technical hotlines, trainings and much more!

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

45-2409

The product you are viewing cross references to these numbers

MS Sports shock absorber. With uniball joint bearing.



Type: RSR RENNEN 2 shorter strut
Parameter: 2200N / 1800N

Fits:
Porsche 911 1972-89
Porsche 930 1975-77 3.0L
Porsche 930 1978-89 3.3L

Please Note:
Price is for each damper you will need to buy 2

Often the colours of the dampers are the best means of identification. Konis are usually orange and red; Boge units tend to be black or grey, and Bilsteins green. But don't take this as gospel: modern Bilsteins come in various colours.

Related reference numbers
Related, superseded, cross reference or alternative numbers for comparison.

24-617321

The product you are viewing cross references to these numbers