B-G Racing

Used when fitting an aftermarket steering wheel, a hub kit is an essential component to your vehicle.

B-G Hub Kits are produced in Italy from the finest cast aluminium materials and are dual drilled to be compatible with various steering wheels featuring either a 6 x 70mm PCD pattern (such as MOMO, Sparco, OMP, Simoni, Mountney M-Range) or 6 x 74mm PCD pattern (such as Nardi, Personal, Raid).
All B-G Hub Kits are supplied with a 24 month warranty as standard.

Please Note: All our hub kits come complete with fixing screws, allen key, airbag resistor (if applicable) and horn button retaining ring.

B-G Racing Horn button retaining ring - low profile



Used to attach a MOMO Horn Button to any MOMO steering wheel, this B-G Low Profile Horn Button Retaining Ring is compatible with all MOMO horn buttons that require a securing plate from the rear of the steering wheel. Attached between the MOMO Hub Kit and steering wheel this part enables you to safely secure the horn button in place.

This B-G Horn Button Retaining Ring also enables the user to fit a MOMO horn button with any of the B-G Steering Wheel Spacers.

Outer Diameter: 80mm
Inner Diameter: 51mm
Fitment: 6x70mm or 6x74mm PCD
Part Number: BG8361

B-G Racing Rubber packers for wide angle rear view mirror brackets



This set of Rubber Packers allows our 1.75" Wide Angle Rear View Mirror Brackets to be used with either 1.5" or 1.7" diameter roll cage bars.

Simply insert the desired size packers between the clamping points on the brackets.

Kit includes: 4x 1.5" packers and 4x 1.7" packers.

B-G Racing Wide angle rear view mirror brackets



Bracket Height: 1.75" = 62.5mm - 2.46" / 2" = 68.5mm - 2.70"
Bracket Length: 1.75" = 117.5mm - 4.63" / 2" = 120.0mm - 4.72"
Bracket Width: 10.0mm - 0.39"
Material: Aluminium
Colour: Black

Designed for use with our Wide Angle Rear View Mirrors, these brackets provide a secure fitment that will not vibrate loose. Simply fasten the mirror to the brackets and bolt the brackets to your roll cage.

All brackets are slotted to provide a wide range of adjustment and are secured to the mirror using 2 wing knobs that allow for simple adjustment by hand.

Available to suit 1.5", 1.7", 1.75" or 2" diameter roll cage bars (1.5" and 1.7" options include 1 pack of rubber inserts)

Sold in pairs.

These universal mirrors are perfect for the track. Featuring a convex glass to provide a wide field of view, they give you the best view of what's behind you.



Mirror Height: 80mm - 3.15"
Mirror Length: 17" (432mm)
Mirror Width: 76mm - 2.99"
Material: Glass, Aluminium & ABS Plastic
Colour: Black


For a secure fitment that will not vibrate loose, simply fasten the mirror to your roll cage using our Wide Angle Rear View Mirror Brackets (available separately).

Available in either 15" or 17" mirror lengths.

These universal mirrors are perfect for the track. Featuring a convex glass to provide a wide field of view, they give you the best view of what's behind you.



Mirror Height: 66mm - 2.60"
Mirror Length: 15" (381mm)
Mirror Width: 63mm - 2.48"
Material: Glass, Aluminium & ABS Plastic
Colour: Black


For a secure fitment that will not vibrate loose, simply fasten the mirror to your roll cage using our Wide Angle Rear View Mirror Brackets (available separately).

Available in either 15" or 17" mirror lengths.

Pre-drilled with a 3x50.8mm PCD bolt pattern, perfect for raising the steering wheel away from the driver to improve comfort and/or provide clear line of sight to the instrument panel.



Material: Aluminium
Depth: 15mm
Fitment: 3x50.8mm PCD

Please Note: This is not compatible with the MOMO Horn Button Retaining Ring.

B-G Steering Wheel Spacers are produced from high quality aluminium with an elegant black anodised finish and laser etched B-G logo, and are simple to fit using the fixing screws provided.

• First Class Design
• Impeccable Racing Pedigree
• One Year Warranty

Pre-drilled with a 3x50.8mm PCD bolt pattern, the B-G Racing 2" Steering Wheel Spacer is perfect for bringing the steering wheel closer to the driver for increased steering input and driver comfort.



Material: Aluminium
Depth: 2 inches (50.8mm)
Fitment: 3x50.8mm PCD


B-G Steering Wheel Spacers are produced from high quality aluminium with an elegant black anodised finish, laser etched B-G logo and are simple to fit using the fixing screws provided.

Also available in sizes 0.5", 1" and 1.5" increments.

• First Class Design
• Impeccable Racing Pedigree
• One Year Warranty

Pre-drilled with a 3x50.8mm PCD bolt pattern, the B-G Racing 1.5" Steering Wheel Spacer is perfect for bringing the steering wheel closer to the driver for increased steering input and driver comfort.



Material: Aluminium
Depth: 1.5 inches (38.1mm)
Fitment: 3x50.8mm PCD

B-G Steering Wheel Spacers are produced from high quality aluminium with an elegant black anodised finish, laser etched B-G logo and are simple to fit using the fixing screws provided.

Also available in sizes 0.5", 1" and 2" increments.

• First Class Design
• Impeccable Racing Pedigree
• One Year Warranty

Pre-drilled with a 3x50.8mm PCD bolt pattern, the B-G Racing 1" Steering Wheel Spacer is perfect for bringing the steering wheel closer to the driver for increased steering input and driver comfort.



Material: Aluminium
Depth: 1 inch (25.4mm)
Fitment: 3x50.8mm PCD

B-G Steering Wheel Spacers are produced from high quality aluminium with an elegant black anodised finish, laser etched B-G logo and are simple to fit using the fixing screws provided.

Also available in sizes 0.5", 1.5" and 2" increments.

• First Class Design
• Impeccable Racing Pedigree
• One Year Warranty

Pre-drilled with a 3x50.8mm PCD bolt pattern, the B-G Racing 0.5" Steering Wheel Spacer is perfect for bringing the steering wheel closer to the driver for increased steering input and driver comfort.



Material: Aluminium
Depth: 0.5 inches (12.7mm)
Fitment: 3x50.8mm PCD


B-G Steering Wheel Spacers are produced from high quality aluminium with an elegant black anodised finish, laser etched B-G logo and are simple to fit using the fixing screws provided.

Also available in sizes 1", 1.5" and 2" increments.

• First Class Design
• Impeccable Racing Pedigree
• One Year Warranty

The B-G Steering Wheel Adaptors are produced from high quality aluminium with an elegant black anodised finish and laser etched B-G logo.



Material: Aluminium
Depth: 12.7mm
Fitment: 6x70mm & 6x74mm PCD

Multi-drilled for both 6x70mm and 6x74mm PCD bolt patterns, enabling the majority of aftermarket steering wheels to be fitted directly to a standard 3x50.8mm quick release, the B-G Racing Steering Wheel Adaptor brings the steering wheel 12.7mm closer to the driver for increased steering input and driver comfort.

• First Class Design
• Impeccable Racing Pedigree
• One Year Warranty

B-G Racing Steering wheel racing quick release bolt on 6x70mm PCD (with screws)



Material: Aluminium + Steel
Width: 82mm
Depth: 67mm
PCD Bolt Pattern: 6x70mm

The B-G Racing Quick Release system allows for quick and easy removal of the steering wheel from the column, making it much easier to get in and out of any race car. A master spline positioned dead centre allows the use of the steering wheel as a reference point, ensuring perfect realignment every time.

Finished in elegant black anodising and bright yellow powder coating, this B-G Racing Quick Release system is manufactured from high quality lightweight aluminium and hard wearing steel for both performance and durability.

The B-G Racing quick release system utilises a 6 x 70mm PCD bolt pattern which fits between the steering wheel and the hub, bringing the steering wheel approximately 50mm close to the driver.

WARNING: The replacement of the steering wheels on cars equipped with airbag systems will disable both the functioning of the airbag of the driver and that of the passenger or any other airbag fitted to the car. For cars equipped with airbag systems, our steering wheels are intended for racing and show use only. Do not attempt to install this kit yourself unless you have been properly trained in the installation and maintenance of car steering wheels .Do not attempt to install this kit without having previously read the instruction manual. Incorrect installation can lead to steering wheel failure which can cause an accident resulting in serious personal injury or death. Caution: Reduced steering wheel diameter will cause increased driver steering effort.

• Master Spline for Perfect Realignment Every Time
• Fits Steering Wheels and Hubs with a 6x70mm PCD
• First Class Design
• Impeccable Racing Pedigree
• High Quality Aluminium & Steel Construction
• One Year Warranty

B-G Racing Steering wheel quick release weld-on - 6 point



Material: Aluminium & Steel
Width: 85mm
Depth: 90mm
Weight: 0.34kg
Shaft Diameter: BGR703: 5/8" or BGR704: 3/4"
PCD Bolt Pattern: 6x70mm & 6x74mm


This B-G Racing 6 Point Shaft Quick Release System is manufactured from high quality aircraft grade aluminium with a hard anodised inner splined hub for durability, and 20mm steel splined shaft available in a choice of 5/8" or 3/4" diameters that will require welding to the steering column. These are cross compatible.

The B-G Racing Quick Release system allows for quick and easy removal of the steering wheel from the column, making it much easier to get in and out of any race car. A master spline positioned dead center allows the use of the steering wheel as a reference point, ensuring perfect realignment every time.

Finished in elegant black anodising and bright yellow powder coating, this racing quick release system fully conforms to the latest FIA technical specifications.

WARNING: The replacement of the steering wheels on cars equipped with airbag systems will disable both the functioning of the airbag of the driver and that of the passenger or any other airbag fitted to the car. For cars equipped with airbag systems, our steering wheels are intended for racing and show use only. Do not attempt to install this kit yourself unless you have been properly trained in the installation and maintenance of car steering wheels .Do not attempt to install this kit without having previously read the instruction manual. Incorrect installation can lead to steering wheel failure which can cause an accident resulting in serious personal injury or death. Caution: Reduced steering wheel diameter will cause increased driver steering effort.

• Conforms to FIA Regulations
• Master Spline for Perfect Realignment Every Time
• Fits Steering Wheels with 6x70mm or 6x74mm PCD
• First Class Design
• Impeccable Racing Pedigree
• High Quality Aluminium & Steel Construction
• One Year Warranty

B-G Racing Steering wheel quick release weld-on - 3 point



Material: Aluminium & Steel
Width: 57mm
Depth: 85mm
Weight: 0.26kg
Shaft Diameter: BGR700: 5/8" or BGR701: 3/4"
PCD Bolt Pattern: 3 x 50.8mm


This B-G Racing 3 Point Shaft Quick Release system is manufactured from high quality aircraft grade aluminium with a hard anodised inner splined hub for durability, and 20mm steel splined shaft available in a choice of 5/8" or 3/4" diameters that will require welding to the steering column. These are cross compatible.

The B-G Racing Quick Release system allows for quick and easy removal of the steering wheel from the column, making it much easier to get in and out of any race car. A master spline positioned dead center allows the use of the steering wheel as a reference point, ensuring perfect realignment every time.

Finished in elegant black anodising and bright yellow powder coating, this racing quick release system fully conforms to the latest FIA technical specifications.

WARNING: The replacement of the steering wheels on cars equipped with airbag systems will disable both the functioning of the airbag of the driver and that of the passenger or any other airbag fitted to the car. For cars equipped with airbag systems, our steering wheels are intended for racing and show use only. Do not attempt to install this kit yourself unless you have been properly trained in the installation and maintenance of car steering wheels .Do not attempt to install this kit without having previously read the instruction manual. Incorrect installation can lead to steering wheel failure which can cause an accident resulting in serious personal injury or death. Caution: Reduced steering wheel diameter will cause increased driver steering effort.

• Conforms to FIA Regulations
• Master Spline for Perfect Realignment Every Time
• Fits Steering Wheels with 3x50mm PCD
• First Class Design
• Impeccable Racing Pedigree
• High Quality Aluminium & Steel Construction
• One Year Warranty

B-G Racing Steering wheel quick release system MOUNTNEY/MOTO-LITA to MOMO/NARDI
(with screws)



Material: Aluminium
Width: 123mm
Depth: 72mm
PCD Bolt Pattern: 6x101mm / 9x101.6mm Hub to 6x70mm / 6x74mm Steering Wheel


The B-G Steering Wheel Quick Release System allows the user to quickly and easily attach/detach the majority of aftermarket steering wheels from the hub, offering the ultimate anti-theft solution by allowing complete removal of the steering wheel when not in use.

Produced from high quality aluminium for maximum durability, the B-G Quick Release System features a push-pin mechanism to prevent premature unlocking.

Utilising a multi-drilled PCD bolt pattern, this version of the B-G Steering Wheel Quick Release System allows users to fit a modern steering wheel with a 6x70mm / 6x74mm PCD such as MOMO, Nardi or Personal to vehicles with a classic 6x101mm / 9x101.6mm PCD hub such as Mountney or Moto-Lita.

For those wanting a Quick Release Mountney or Moto-Lita steering wheel, then the addition of our BG4911 Momo/Nardi to Mountney/Moto-Lita Adaptor fitted in between the steering wheel and Quick Release will allow this function.

This Quick Release fits between the steering wheel and the hub.

WARNING: The replacement of the steering wheels on cars equipped with airbag systems will disable both the functioning of the airbag of the driver and that of the passenger or any other airbag fitted to the car. For cars equipped with airbag systems, our steering wheels are intended for racing and show use only. Do not attempt to install this kit yourself unless you have been properly trained in the installation and maintenance of car steering wheels. Do not attempt to install this kit without having previously read the instruction manual. Incorrect installation can lead to steering wheel failure which can cause an accident resulting in serious personal injury or death. Caution: Reduced steering wheel diameter will cause increased driver steering effort.